BSOD from BugCheck error 1001

[MysticalChickenMan]

I've been getting spread out BSOD from a system service exception error, which in event viewer shows up as a BugCheck with an ID of 1001, and the following lines in the description:
The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff801b396b04b, 0xfffff20024c02df0, 0x0000000000000000). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 8ada883e-492b-4192-a771-653a1a9d541c.

The PC I'm running on right now is entirely new, I've replaced the motherboard and CPU once just trying to get it to function. It works perfectly inbetween crashes, and I've updated every driver I could find. I've tested the Hard Drive and the Memory, performed Disk Checks, and various other tests/fixes that were said to work. At the moment I'm sure it's still here, because after all my efforts it recently crashed from the same bug. I will supply the dump in hopes that someone else can figure out what's wrong. Thank you.

https://drive.google.com/drive/folders/1fAH_t_XAvbraUc8MMnNFnujwuX9fzrdx?usp=sharing

 

[jojesa]

Could you post your system components.
If your motherboard has an IEEE 1394 controller disable it in the BIOS.

 

[MysticalChickenMan]

Could you post your system components.
If your motherboard has an IEEE 1394 controller disable it in the BIOS.

Yeah sorry I forgot to do that:
Nvidia GeForce GTX 1080
ASUS ROG Maximus X Hero
Intel i7-8700K 3.7GHz
16gbs DDR4 2133MHz (Corsair)
and I believe the PSU was 850W

 

[jojesa]

Could you post your system components.
If your motherboard has an IEEE 1394 controller disable it in the BIOS.

Yeah sorry I forgot to do that:
Nvidia GeForce GTX 1080
ASUS ROG Maximus X Hero
Intel i7-8700K 3.7GHz
16gbs DDR4 2133MHz (Corsair)
and I believe the PSU was 850W

What's the PSU model?

 

[MysticalChickenMan]

Could you post your system components.
If your motherboard has an IEEE 1394 controller disable it in the BIOS.

Yeah sorry I forgot to do that:
Nvidia GeForce GTX 1080
ASUS ROG Maximus X Hero
Intel i7-8700K 3.7GHz
16gbs DDR4 2133MHz (Corsair)
and I believe the PSU was 850W

What's the PSU model?

It's an EVGA Supernova 850 G+

 

[MysticalChickenMan]

potentially unneeded bump

 

[jojesa]

potentially unneeded bump

Check your video card drivers.
Did you do what I previously suggested?

 

[MysticalChickenMan]

potentially unneeded bump

Check your video card drivers.
Did you do what I previously suggested?

Yeah I checked in my bios and looked up online to make certain, I don't have an option for IEEE 1394, and my video card drivers are up to date.

 

[MysticalChickenMan]

If it helps any I've copied my system information.

OS Name Microsoft Windows 10 Pro
Version 10.0.17134 Build 17134
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DESKTOP-RRLC63V
System Manufacturer System manufacturer
System Model System Product Name
System Type x64-based PC
System SKU SKU
Processor Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz, 3696 Mhz, 6 Core(s), 12 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 1003, 12/21/2017
SMBIOS Version 3.0
Embedded Controller Version 255.255
BIOS Mode UEFI
BaseBoard Manufacturer ASUSTeK COMPUTER INC.
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Desktop
Secure Boot State Off
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "10.0.17134.1"
User Name DESKTOP-RRLC63V\W
Time Zone Eastern Daylight Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 13.0 GB
Total Virtual Memory 18.8 GB
Available Virtual Memory 13.8 GB
Page File Space 2.88 GB
Page File C:\pagefile.sys
Kernel DMA Protection Off
Virtualization-based security Not enabled
Device Encryption Support Reasons for failed automatic device encryption: TPM is not usable, PCR7 binding is not supported, Hardware Security Test Interface failed and device is not InstantGo, Un-allowed DMA capable bus/device(s) detected, TPM is not usable
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes

 

[MysticalChickenMan]

I also have my Video Card Information, I feel that would help more.

Name NVIDIA GeForce GTX 1080
PNP Device ID PCI\VEN_10DE&DEV_1B80&SUBSYS_33621462&REV_A1\4&56CA552&0&0008
Adapter Type GeForce GTX 1080, NVIDIA compatible
Adapter Description NVIDIA GeForce GTX 1080
Adapter RAM (1,048,576) bytes
Installed Drivers C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_38c9bee769f9ef1f\nvldumdx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_38c9bee769f9ef1f\nvldumdx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_38c9bee769f9ef1f\nvldumdx.dll,C:\WINDOWS\System32\DriverStore\FileRepository\nv_dispi.inf_amd64_38c9bee769f9ef1f\nvldumdx.dll
Driver Version 24.21.13.9764
INF File oem11.inf (Section090 section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 3840 x 2160 x 60 hertz
Bits/Pixel 32
Memory Address 0xDE000000-0xDF0FFFFF
Memory Address 0xC0000000-0xD1FFFFFF
Memory Address 0xD0000000-0xD1FFFFFF
I/O Port 0x0000E000-0x0000EFFF
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\driverstore\filerepository\nv_dispi.inf_amd64_38c9bee769f9ef1f\nvlddmkm.sys (24.21.13.9764, 16.37 MB (17,168,744 bytes), 5/9/2018 8:38 PM)

 

[jojesa]

Do you have any overclock on CPU or RAM?
Have you run Memtest86+ to check your RAM?
There are countless way to get a ntoskrnl.exe BSOD.
Have any drivers been updated right before the issue started?

 

[MysticalChickenMan]

Do you have any overclock on CPU or RAM?
Have you run Memtest86+ to check your RAM?
There are countless way to get a ntoskrnl.exe BSOD.
Have any drivers been updated right before the issue started?

There was no overclocking performed, I've run Memtest already, it came back with no negative results, and this issue started ever since the PC was freshly built a few days ago. I did have to download drivers for just about everything, so that may be part of it.

 

[jojesa]

Do you have any overclock on CPU or RAM?
Have you run Memtest86+ to check your RAM?
There are countless way to get a ntoskrnl.exe BSOD.
Have any drivers been updated right before the issue started?

There was no overclocking performed, I've run Memtest already, it came back with no negative results, and this issue started ever since the PC was freshly built a few days ago. I did have to download drivers for just about everything, so that may be part of it.

Usually that happens when there is a software driver bug. I didn't see any drivers listed in the minidump...maybe you want to create a full memory dump.
Make sure you have the latest BIOS.
Disable 'Fast Startup'

 

[MysticalChickenMan]

Do you have any overclock on CPU or RAM?
Have you run Memtest86+ to check your RAM?
There are countless way to get a ntoskrnl.exe BSOD.
Have any drivers been updated right before the issue started?

There was no overclocking performed, I've run Memtest already, it came back with no negative results, and this issue started ever since the PC was freshly built a few days ago. I did have to download drivers for just about everything, so that may be part of it.

Usually that happens when there is a software driver bug. I didn't see any drivers listed in the minidump...maybe you want to create a full memory dump.
Make sure you have the latest BIOS.
Disable 'Fast Startup'

I have just now disabled fast startup and have updated my BIOS from Version 1001 to Version 1301, I've prepared my system to create a full memory dump but from the look of it there won't be a file for me to send until the unit crashes.
Let's just hope that doesn't happen. Thanks for your help so far.

EDIT: Yesterday after updating BIOS I was able to run the computer for the entirety of the day doing various tasks including gaming and idling, I didn't get even one crash, even when attempting things that would cause issue, I'm going to call this the solution until further notice because now all I can do is test and make sure nothing else happens. Thank you very much for your time, you really saved me from some headaches.