I know little to nothing about computer until I learned a bit before building my own.
So I got all my parts in, assembled it all and the computer seems to be working just fine, lights are on and every fan is spinning (only things I know to look for if it's working). Then I plug it into my monitor (DVI Cable) and says "no signal". I'm almost 100% positive everything is plugged in correctly, I even tried re-entering the Graphics card and memory sticks, still no luck. Here is the build if you have any recommendations.
Tomahawk B350
AMD Ryzen 7 1700x
EVGA Supernova G2
Geforce GTX 1060
Asus VG248QE Monitor
If you could explain as simply as possible that would also be a big help. Thanks.
So I got all my parts in, assembled it all and the computer seems to be working just fine, lights are on and every fan is spinning (only things I know to look for if it's working). Then I plug it into my monitor (DVI Cable) and says "no signal". I'm almost 100% positive everything is plugged in correctly, I even tried re-entering the Graphics card and memory sticks, still no luck. Here is the build if you have any recommendations.
Tomahawk B350
AMD Ryzen 7 1700x
EVGA Supernova G2
Geforce GTX 1060
Asus VG248QE Monitor
If you could explain as simply as possible that would also be a big help. Thanks.
Facebook
Twitter
Instagram