N00B needs assistance adding a second 500 GB ssd on newly purchased gaming system

[Madhatter4]

I recently purchased the following gaming system

Operating System
Windows 10 Pro 64-bit
CPU
Intel Core i7 @ 3.70GHz 32 °C
Coffee Lake 14nm Technology
RAM
16.0GB Dual-Channel Unknown @ 1333MHz (19-19-19-43)
Motherboard
ASRock Z370 Killer SLI/ac (CPUSocket) 31 °C
Graphics
Dell S2716DG (2560x1440@59Hz)
4095MB NVIDIA GeForce GTX 1070 Ti (MSI) 37 °C
Storage
465GB Western Digital WDC WDS500G2B0A-00SM50 (SATA (SSD)) 34 °C
Optical Drives
No optical disk drives detected
Audio
Realtek High Definition Audio

I have a second 500 GB SSD that I would like to install. Its a Samsung SSD and I was able to mount it in the case but I dont have the wires that go to it. Furthermore Im not sure exactly where to plug these into the motherboard. If anyone can give me some advice on this or direct me to the proper install kit on I would greatly appreciate it.

Thanks

 

[SchizTech]

The drive should have two cables: one for power and another for data. The power cable should come directly from the power supply. Look for a tip like this

The other cable would be called a SATA cable and should be available for a few bones online:

https://www.newegg.com/Product/Product.aspx?Item=N82E16812119272&ignorebbr=1&cm_re=sata_cable-_-12-119-272-_-Product

It goes to a port on the board like this

 

[Madhatter4]

I found all the right cables and hooked it into the motherboard!!!

Thanks for all the help