Problems Migrating Windows 10 to SSD

[RobotUnicornZombie]

As a gift to my mother, I decided to upgrade the 5400 RPM hard drive in her laptop to an SSD. I used EaseUS Backup to clone the drive onto the SSD, removed the old drive, tried to boot up and was met with error code 0xc000000e.

I've already tried using a windows flash drive in UEFI mode to run command prompt and bootrec /rebuildbcd. While this does detect the OS on the SSD, trying to complete the program results in "The system cannot find the path specified."

Booting off of the flash drive loads Windows, and displays the SSD as C:\, but removing the flash drive and restarting causes the same BSOD/error code as before.

Any help with this would be greatly appreciated, as I'd like to get her laptop back up and running as soon as possible. Thank you!

 

[karenjoly]

I suggest a better cloning operation may assist. At the end of the following discussion is a set outline of how to clone with Macrium Reflect, using the free version.
http://www.tomshardware.co.uk/forum/id-3759678/ssd-boot-drive-windows-show-files-hdd.html