Timings for G.Skill Aegis 3000 CL16

[ragorred]

Hi guys! I have 2x8GB Aegis 3000 cl16. This memory kit doesn't start with XMP profile (from the second boot), so I decided to set timings manually.
The question is: should I change ALL the timings or only these ones (16-18-18-38 (CL-RCD-RP-RAS))?

 

[RememberThe5th]

Change those and command rate 1T/2T.
Also you need to set higher voltage tjat is specified onto xmp.

 

[ragorred]

Done. And what about those: 16-18-18-38 (CL-RCD-RP-RAS) / 56-526-391-241-8-6-32 (RC-RFC1-RFC2-RFC4-RRDL-RRDS-FAW) [info about XMP from AIDA64]? Can't find some of them in BIOS.

 

[RememberThe5th]

No the main 16-18-18-38 are the only thing you should worry about, others are tricky to setup, since two combing results the third one, sorry I cannot give you exact how and what since ME/I cannot understand it well, for now keep the main timings and a bit higher voltage by 0.1V or 0.2V wont kill it.

Also on CPU-Z SPD tab shows the voltage for XMP.