[SOLVED] PC Boots but no display on monitor

[pelicabs]

HI, So today I turned on my PC and everything was fine, until Windows ran into a problem and every time after trying to boot after that, I got the Asus loading screen? (see picture below) and after searching up for some solutions online, I took my ram out and in, which resulted in my monitors getting no display at all.

I'm not sure whats happening but I could use anything

My Hardware:
i3 8100
ZOTAC gtx 1060 AMP!
ASUS Prime B3560M-A
1x8 Corsair value select DDR4 2133 MHz
Windows 10 64 bit
Kingston SUV 120 GB SSD
WD 1 GB hard drive
EVGA 500W
Corsair VOID wireless

http://

 

[alexoiu]

Hi, Try clearing the CMOS (unplug the power cord and remove the CMOS battery for a minute). If still no go, try connecting an internal speaker to the board and see if any beeps when starting the board without RAMs.

 

[pelicabs]

Hi, Try clearing the CMOS (unplug the power cord and remove the CMOS battery for a minute). If still no go, try connecting an internal speaker to the board and see if any beeps when starting the board without RAMs.

This kinda worked.
When I reseated the CMOS battery my keyboard and mouse got power upon boot but my monitors still got no display? is this a GPU problem now?

I also can't really do beeps because I don't think that my case or motherboard has onboard speakers


I have a Masterbox Lite 3.1 from Cooler Master

 

[alexoiu]

"When I reseated the CMOS battery my keyboard and mouse got power upon boot but my monitors still got no display? is this a GPU problem now?"
Try testing with graphics card removed (monitor connected to motherboard).