Can´t get a Celeron 1ghz work with Chaintech 6AJA4/G100

<WHY
They say It should work!!
It´s a celeron 1 GHz 0,13 micron
256 Kb cache 100 Mhz system bus !

KASI
6 answers Last reply
More about celeron 1ghz work chaintech 6aja4 g100
  1. Your board probably doesn't support Tualatins. The older Celeron 1GHz .18 micron chip probably does.

    What's the frequency, Kenneth?
  2. 100 MHz System Bus, It says on the celeron box :-)
    So that should not be a problem for the 6AJA4/G100 board.


    KASI
  3. I don't see anything on their website about support for Tualatin processors or Intel VRM 8.5-you need VRM 8.5 to support Tualatins, which run at 1.475v. Are you sure you even have a Tualatin?

    What's the frequency, Kenneth?
  4. I ordered a Celeron 1 GHz (not tualatin), but i think i got something else, Because the celeron i got has 256 Kb Cache and is a 0,13 micron processor.
    So I started to think that they have send me the wrong processor...

    KASI
  5. All the new socket370 processors say FC-PGA2 on the box and have heat spreaders, BUT you can tell the difference in the voltage: If it's 1.75v, it's a Coppermine, compatable with older boards. If it's 1.475v, it's a Tualatin, only compatable with the latest boards.

    What's the frequency, Kenneth?
  6. You have get a CPU with Tualatin core(13 micron and 256 Kb cache). It will not work with older board. You need a CPU with Coppermine (18 micron and 128 Kb cache) core.
Ask a new question

Read More

Motherboards Celeron Cache Chaintech