Reply to this thread
Solved Forum question
Started by nileshjswl1991 | | 10 answers
i need a best graphic card for gigabyte mother board with intel core 2 duo E7500 2.93GHz processor 2 gb ram and 1 tb of hard disc
please help
please help
soumikkol60 said:
smeezekitty said:
soumikkol60 said:
DrVoidberg said:
you have to overclock you cpu! i´m running a e8500 on 4ghz with a hd7790.
for example on stock clock its impossible to play metro last light on very high. and in other games i´m getting huge frame drops.
i tested a little with 4ghz and i´m getting the same average framerates like the most benchmarks with new cpu´s (eg i7) and a hd7790
btw: i can play on stock clock max payne 3 on highest setting
Hello. I am completely new to overclocking. Can you tell me how I can overclock my Core 2 Duo E4600 and to what GHz? Much thanks in advance.
You bumped a 8 month old thread.
What is your motherboard and CPU cooler?
Gigabyte GA-G41M Motherboard
Cooler Master Hyper TX3 EVO Cooler
Ok. You should have a fair bit of headroom.
That is a decent CPU cooler and your CPU only has a FSB of 800MT/s so
your system FSB is probably only 200MHz.
You can probably hit 3GHz with stock voltage if you have a pretty good chip.
With a voltage bump you might get to 3.2 or so
First I would note down your normal CPU VCore voltage
then switch to manual voltage and program in that voltage. That will
prevent the motherboard from unnecessarily overvolting
Then start turning up your FSB up. You should have a 12x multiplier
so if you increase the FSB 1 MHz your CPU will increase 12 MHz.
Run a stability tester like OCCT or Prime95 for at least 30 minutes
to check the stability and temperatures after every major increase in FSB.
How I like to do it is start small (say 10MHz FSB bump)
and stability test to make sure your board is ok with OCing
If that is okay then try a little higher.
FSB = 234 should make your CPU run at 2.8GHz
FSB = 250 should make your CPU run at 3GHz
Don't start increasing voltage unless its unstable and only if your temperatures are okay.
Voltage is the most dangerous part of overclocking
soumikkol60
October 15, 2014 10:52:19 PM
smeezekitty said:
soumikkol60 said:
DrVoidberg said:
you have to overclock you cpu! i´m running a e8500 on 4ghz with a hd7790.
for example on stock clock its impossible to play metro last light on very high. and in other games i´m getting huge frame drops.
i tested a little with 4ghz and i´m getting the same average framerates like the most benchmarks with new cpu´s (eg i7) and a hd7790
btw: i can play on stock clock max payne 3 on highest setting
Hello. I am completely new to overclocking. Can you tell me how I can overclock my Core 2 Duo E4600 and to what GHz? Much thanks in advance.
You bumped a 8 month old thread.
What is your motherboard and CPU cooler?
Gigabyte GA-G41M Motherboard
Cooler Master Hyper TX3 EVO Cooler
soumikkol60 said:
DrVoidberg said:
you have to overclock you cpu! i´m running a e8500 on 4ghz with a hd7790.
for example on stock clock its impossible to play metro last light on very high. and in other games i´m getting huge frame drops.
i tested a little with 4ghz and i´m getting the same average framerates like the most benchmarks with new cpu´s (eg i7) and a hd7790
btw: i can play on stock clock max payne 3 on highest setting
Hello. I am completely new to overclocking. Can you tell me how I can overclock my Core 2 Duo E4600 and to what GHz? Much thanks in advance.
You bumped a 8 month old thread.
What is your motherboard and CPU cooler?
soumikkol60
October 15, 2014 9:30:24 PM
DrVoidberg said:
you have to overclock you cpu! i´m running a e8500 on 4ghz with a hd7790.
for example on stock clock its impossible to play metro last light on very high. and in other games i´m getting huge frame drops.
i tested a little with 4ghz and i´m getting the same average framerates like the most benchmarks with new cpu´s (eg i7) and a hd7790
btw: i can play on stock clock max payne 3 on highest setting
Hello. I am completely new to overclocking. Can you tell me how I can overclock my Core 2 Duo E4600 and to what GHz? Much thanks in advance.
DrVoidberg
February 9, 2014 3:20:51 PM
you have to overclock you cpu!
i´m running a e8500 on 4ghz with a hd7790.
for example on stock clock its impossible to play metro last light on very high. and in other games i´m getting huge frame drops.
i tested a little with 4ghz and i´m getting the same average framerates like the most benchmarks with new cpu´s (eg i7) and a hd7790
btw: i can play on stock clock max payne 3 on highest setting
i´m running a e8500 on 4ghz with a hd7790.
for example on stock clock its impossible to play metro last light on very high. and in other games i´m getting huge frame drops.
i tested a little with 4ghz and i´m getting the same average framerates like the most benchmarks with new cpu´s (eg i7) and a hd7790
btw: i can play on stock clock max payne 3 on highest setting
asad dab
February 8, 2014 8:03:27 AM
http://techreport.com/review/23690/review-nvidia-geforc...
Shouldn't have any problems, although 1GB VRAM isn't enough for high-very high textures at 1080p. Get a 2GB version if you like high-quality textures.
Also, play in DX9 with FXAA only. Should get really good performance with all other settings at Very High.
Shouldn't have any problems, although 1GB VRAM isn't enough for high-very high textures at 1080p. Get a 2GB version if you like high-quality textures.
Also, play in DX9 with FXAA only. Should get really good performance with all other settings at Very High.
nileshjswl1991
February 7, 2014 10:13:24 PM
nileshjswl1991
February 7, 2014 10:13:02 PM
Best solution chosen by BuzzKenway
See all answers