Reply to this thread Forum question Started by Liambhatton | February 11, 2014 3:42:41 PM | 4 answers Sapphire R9 270x Toxic fit in ATX/mATX case ? I am looking to buy a Sapphire R9 270x Toxic but I don't know if the card will be too big to fit in my ATX/mATX case Graphics card: http://www.overclockers.co.uk/showproduct.php?prodid=GX... Case: http://m.ebay.co.uk/itm/141113103096?nav=SEARCH Thanks Your solution preview Close Enable email notification of this thread By posting on this site, I confirm I am over 13 years of age and agree to abide by the site’s rules. Answer Its Me Greg June 3, 2014 3:26:25 AM Keep in mind that the cases have a 3.5" HDD holders, which (in my Kolink DS08A case) are about 3.9/4" length minus from the total space. lmaonade200 February 11, 2014 4:17:53 PM since these are mass produced you can just look up the product dimensions on amazon or something hdshatter February 11, 2014 4:12:04 PM There is no information on maximum card length you should contact the seller. lmaonade200 February 11, 2014 4:05:14 PM it should, your case has a width of 173 mm while the toxic has a width of about 101 mm, and has a depth of 405 mm while the toxic has a depth of about 375 mm See all answers
Its Me Greg June 3, 2014 3:26:25 AM Keep in mind that the cases have a 3.5" HDD holders, which (in my Kolink DS08A case) are about 3.9/4" length minus from the total space.
lmaonade200 February 11, 2014 4:17:53 PM since these are mass produced you can just look up the product dimensions on amazon or something
hdshatter February 11, 2014 4:12:04 PM There is no information on maximum card length you should contact the seller.
lmaonade200 February 11, 2014 4:05:14 PM it should, your case has a width of 173 mm while the toxic has a width of about 101 mm, and has a depth of 405 mm while the toxic has a depth of about 375 mm