Sign in with
Sign up | Sign in

Reply to this thread

Solved Forum question

Started by Alex1357 | | 18 answers
GTX 660 SLI Worth It
Hello I just bought a GTX 660 which is serving me well but in the future would it be wise to be a second GTX 660 and i have a z87 chipset mobo its this model GA-Z87M-D3HP
can that use sli
  • By posting on this site, I confirm I am over 13 years of age and agree to abide by the site’s rules.

April 27, 2014 7:58:45 PM

OK you should be fine then
April 27, 2014 7:31:29 PM

i have a mid tower
April 25, 2014 7:03:25 PM

Some of the smaller cases you can't fit 2 x graphics cards because they clash with other bits eg power supply. That's what I was thinking.

And usually you wouldn't by a matx mobo if you've got a mid- or full-tower.
April 25, 2014 4:57:17 PM

Well, i geussing it is at least Matx as his current board(GA-Z87M-D3HP) is micro atx.
April 25, 2014 4:51:31 PM

bignastyid said:
i7Baby said:
But you can't fit sli in a mitx case


Yes you can. Most matx boards have 4 pci-e slots which is plenty of room for SLI or Crossfire even with dual slot cards. I think you may have Matx and Mini ITX mixed up. Becasue with mini ITX board there will only be room for 1 pci-e port.
Here's a Z87 Matx board that supports SLI
http://www.newegg.com/Product/Product.aspx?Item=N82E168...



No no no. His case! What is it?
April 25, 2014 7:31:16 AM

i7Baby said:
But you can't fit sli in a mitx case


Yes you can. Most matx boards have 4 pci-e slots which is plenty of room for SLI or Crossfire even with dual slot cards. I think you may have Matx and Mini ITX mixed up. Becasue with mini ITX board there will only be room for 1 pci-e port.
Here's a Z87 Matx board that supports SLI
http://www.newegg.com/Product/Product.aspx?Item=N82E168...
April 25, 2014 7:03:29 AM

Alex1357 said:
ill explain better have you seen those boards with the x1 baks cut off so you can put full sized cards in them but it would run at x1


but you would have a little thing that are the x16 pins and you put in the full sized slot not the x4 and 2 ribbon connectors come out and there are 2 x16 slots running at x8


Yes, pics please. I think I know what you are describing, but if the 2nd card is not in the #2 PCIe X16 slot, SLI/CF won't work.
April 25, 2014 2:37:24 AM

But you can't fit sli in a mitx case
April 24, 2014 6:21:07 PM

i7Baby said:
Can you fit an ATX motherboard in your case? What make and model case have you got?

If you really want to run 660 sli you need to get an ATX size Z87 mobo.

But if you need to get another case too, then its not worth it from a costing point of view. So then I'd recommend just getting one better graphics card. Buit you'll need a power supply that'll run either choice. So what PSU have you got - make and model?


Actually there are several matx z87 boards that support SLI.
April 24, 2014 6:14:01 PM

Can you fit an ATX motherboard in your case? What make and model case have you got?

If you really want to run 660 sli you need to get an ATX size Z87 mobo.

But if you need to get another case too, then its not worth it from a costing point of view. So then I'd recommend just getting one better graphics card. Buit you'll need a power supply that'll run either choice. So what PSU have you got - make and model?

See all answers