Reply to this thread
Solved Forum question
Started by FaqirKhan | | 7 answers
Hello Dear Fellows,
I have a 1440 x 900 LCD Monitor , so will the GTX 660 be overkill for this LCD Display?
Will I see difference in FPS when running at 1440 x 900 and 1080p ?
Can I choose high settings (not ultra) for games with this Display ?
How about GTA IV? BF3 ? Ghosts ?
( Don't tell me to get 1080p Display , Please answer my Question
)
Intel Pentium G3220 @ 3.0 x 2 GHz ( Haswell CPU)
Kingston Standard RAM ( 2 x 2 GB) @ 1333MHz
Western Digital Blue 500GB HDD @ 7200RPM
Gigabyte H81M-DS2 Motherboard
Thermaltake 630W (SPS-630) Efficiency 87%
LCD by Toshiba @ 1440 x 900 Resolution
ASUS SuperDrive..
I have a 1440 x 900 LCD Monitor , so will the GTX 660 be overkill for this LCD Display?
Will I see difference in FPS when running at 1440 x 900 and 1080p ?
Can I choose high settings (not ultra) for games with this Display ?
How about GTA IV? BF3 ? Ghosts ?
( Don't tell me to get 1080p Display , Please answer my Question
)Intel Pentium G3220 @ 3.0 x 2 GHz ( Haswell CPU)
Kingston Standard RAM ( 2 x 2 GB) @ 1333MHz
Western Digital Blue 500GB HDD @ 7200RPM
Gigabyte H81M-DS2 Motherboard
Thermaltake 630W (SPS-630) Efficiency 87%
LCD by Toshiba @ 1440 x 900 Resolution
ASUS SuperDrive..
cst1992
April 27, 2014 2:08:01 AM
It sure is. I'd say 30FPS, not 40+(for any computer really). But it's OK, 35FPS isn't too different than 60.
UPDATE: Your CPU is the Pentium which is dual core, and GTAIV gets real benefit from a 4 core CPU. 25-30FPS is what you should expect. When you get a 4 core CPU, you should see an increase of up to 40.
UPDATE: Your CPU is the Pentium which is dual core, and GTAIV gets real benefit from a 4 core CPU. 25-30FPS is what you should expect. When you get a 4 core CPU, you should see an increase of up to 40.
FaqirKhan
April 27, 2014 12:20:25 AM
cst1992 said:
Honestly, given enough time, no card is overkill. You'll hear 90% of guys say a GTX780Ti is overkill for 1080p resolution, but given 3 years, it's guaranteed to have less than 60fps maxed out in some games or the other.Get the 660. It's a good card for your system.
Yeah You are right mate
, Sure I will get the 660 , It's the maximum possible card that will not bottleneck ( or little bottleneck ) with my Rig , any higher then this , and the CPU will be bottleneck..I honestly don't mind Medium Settings , nor a small Display as 1440x900 , As Long as my FPS Stay above 40+ ..
Can You tell me that with this RiG I can run GTA IV with 40+ ? I have heard GTA IV is the most horrible port.
FaqirKhan
April 27, 2014 12:17:33 AM
photonboy said:
Not all games on Ultra, so you still need to tweak some games to meet your desired frame rate (i.e. 60FPS).This is my tweaking method:
1) Start FRAPS and the game.
2) Turn or force VSYNC OFF
3) Tweak quality settings for optimal visual that gives me 60FPS at least 90% of the time.
4) VSYNC ON. FRAPS OFF.
5) Repeat later if needed.
My only issue with Adaptive VSync is that it gives screen tearing in most pre-rendered cut scenes (kicks in below the target refresh rate so 30FPS video still has tearing).
Okay I will do this , after I get my card. Thanks
P.S. 40+ Consistent FPS is Okay for me
cst1992
April 27, 2014 12:05:55 AM
photonboy
April 26, 2014 11:05:06 PM
Not all games on Ultra, so you still need to tweak some games to meet your desired frame rate (i.e. 60FPS).
This is my tweaking method:
1) Start FRAPS and the game.
2) Turn or force VSYNC OFF
3) Tweak quality settings for optimal visual that gives me 60FPS at least 90% of the time.
4) VSYNC ON. FRAPS OFF.
5) Repeat later if needed.
My only issue with Adaptive VSync is that it gives screen tearing in most pre-rendered cut scenes (kicks in below the target refresh rate so 30FPS video still has tearing).
This is my tweaking method:
1) Start FRAPS and the game.
2) Turn or force VSYNC OFF
3) Tweak quality settings for optimal visual that gives me 60FPS at least 90% of the time.
4) VSYNC ON. FRAPS OFF.
5) Repeat later if needed.
My only issue with Adaptive VSync is that it gives screen tearing in most pre-rendered cut scenes (kicks in below the target refresh rate so 30FPS video still has tearing).
FaqirKhan
April 26, 2014 10:47:13 PM
Best solution chosen by FaqirKhan
mohit9206
April 26, 2014 10:43:04 PM
See all answers