Sign in with
Sign up | Sign in

Reply to this thread

Solved Forum question

Started by DentistPHD | | 6 answers
New Graphics card No monitor display
I just got a new graphics card from a friend (Sapphire radeon 7750 low profile), and when i install the card it doesnt give signal to my monitor but it makes the windows sound when i get into windows.

PC Specs:
400W power supply
4 gig ram
Intel Pentium g645 2.9 GHZ dual core
Windows 8.1

P.S. I'm kind of new to computers and don't know how to access the bios because if i shift restart The UEFI Firmware Settings is not there.
  • By posting on this site, I confirm I am over 13 years of age and agree to abide by the site’s rules.

June 25, 2014 11:10:01 AM

Thank you, i chose PEG and it works now.
June 25, 2014 10:35:42 AM

It gives me 3 options: auto(which it is currently on), IGD, AND PEG which one should i pick?
June 24, 2014 6:56:23 PM

The card was working fine on my freinds computer.

P.S. I currently havn't tried the BIOS its too dark atm and don't want to wake everyone up. I'm going to try it in the morning.
a b U Graphics card
June 24, 2014 6:40:35 PM

It is possible the card doesn't work. If possible see if you can test the card in another system.
June 24, 2014 6:35:32 PM

uhh none of my ports are working when i put the graphics card in.

Best solution chosen by DentistPHD

a b U Graphics card
June 24, 2014 6:31:25 PM

You need to hit either F2 or Delete to enter the BIOS sometimes you should be able to see on the boot screen what button to hit to enter "setup". Your system may be defaulting to the motherboards graphics for display. I'd check to see if one of your outputs is actually sending an output to your monitor. (Basically connect your monitor to your motherboard etc until you get a display)

See all answers