Reply to this thread
Solved Forum question
Started by elpuxa | | 8 answers
Hello
This is my second thread today
Im having some problems with my new psu and I was wondering if someone could tell me how to hook up a corsair vs550w on to a Asus P8H61-M LK
Thank you for your time
This is my second thread today
Im having some problems with my new psu and I was wondering if someone could tell me how to hook up a corsair vs550w on to a Asus P8H61-M LK
Thank you for your time
byza
August 23, 2014 2:57:59 PM
elpuxa
August 23, 2014 10:36:04 AM
elpuxa
August 23, 2014 5:30:24 AM
byza said:
No problems. Don't forget to close the thread if it works.Sure! But im pretty sure that I played battlefield bad company 2 yesterday and some Mame 32 and had no problems but just to be sure I pluged out both of the psu cables to the motherboard and blow on them I even used a different 4 pin cable but I noticed that the other cable im not sure If its 16 pin or something like that had a pin missing (metal thingy inside the plastic cover) but that might be normal im not sure, then I took my ram memory out and plugged it back in. But to be safe I booted up NeorageX battlefield bad company 2 and Cs go and after a good 10 minutes pc didnt shut down but im going to go out and when im come home il see if its still working
byza
August 23, 2014 4:37:40 AM
elpuxa
August 23, 2014 4:34:46 AM
byza said:
Ok you need to plug in the cpu power and the motherboard power. Both are outlined in the first pic on this link, but you should probably read a build guide.http://www.tomshardware.com/forum/261145-31-perform-ste...
Pretty sure I Installed those but Im going to double check!
Thanks
Best solution chosen by elpuxa
byza
August 23, 2014 4:28:00 AM
Ok you need to plug in the cpu power and the motherboard power. Both are outlined in the first pic on this link, but you should probably read a build guide.
http://www.tomshardware.com/forum/261145-31-perform-ste...
http://www.tomshardware.com/forum/261145-31-perform-ste...
elpuxa
August 23, 2014 4:25:55 AM
byza
August 23, 2014 4:18:28 AM
See all answers