Sign in with
Sign up | Sign in

Reply to this thread

Solved Forum question

Started by cwaters0320 | | 3 answers
I/O shield conundrum
Hello everybody i'm currently in the process of finishing my build and i'm having some trouble installing the mobo into the I/O shield. The case is an NZXT Phantom and the mobo is an Asus Z97-A. I have the shield in the right direction and everything so whats the problem? There are a few tabs that sort of protrude but im not sure if that is the problem. Thank you for all of your help everyone.
  • By posting on this site, I confirm I am over 13 years of age and agree to abide by the site’s rules.

August 23, 2014 11:35:45 AM

I've made sure the panel is "snapped" into place. I am still having trouble getting the screw holes and I/O plate to line up just right? Thanks to those who have already replied.
a b Ĉ ASUS
a b V Motherboard
August 23, 2014 8:08:52 AM

You will notice the I/O shield POP into place, it takes some force and when its in position you will be sure that it is. It shouldn't be easily able to pop back out.

Best solution chosen by cwaters0320

August 23, 2014 5:32:47 AM

You just kinda push the board up against those tabs

See all answers