Sign in with
Sign up | Sign in

Reply to this thread

Solved Forum question

Started by TorlvlenT | | 5 answers
Corsair H100 + H100i pumps waterloop setup possible?
Hello everyone,

I had this small question about creating a waterloop with 2 corsair pumps (H100 + H100i) + 2 Reservoirs + 2 Rads.


Light blue = Reservoirs
Red = H100 and H100i
Yellow/Black = Radiators


The only concern I have regarding this loop is that there wont be enough "force" to push the water from the lower Radiator to the reservoir again.. So I was wondering if anyone had any suggestions or if I could go all the way to make this loop?

PS. I've heard that the Corsair pumps have very small flow rate so thats why I had this concern..

THANK YOU ALL VERY MUCH BEFOREHAND FOR THE INFORMATION AND HELP!!
  • By posting on this site, I confirm I am over 13 years of age and agree to abide by the site’s rules.

September 3, 2014 9:17:19 AM

I think I'll handle them both as AIO kits then :(  Might aswell get a Kraken G10 for the GPU and use the H80i with it :(  Thanks guys!

Best solution chosen by TorlvlenT

a b K Overclocking
September 3, 2014 12:02:12 AM

They really aren't made to be put in custom loops, you're not going to get the power you need. I don't have one so i'm not 100% on this but you might be able to add in a pump to the custom loop you want to get the power, although I would really do it properly or not at all. Just use it as an AIO because you're not going to get any improvement by what you're trying.
September 2, 2014 11:10:40 PM

The thing is I already have 2 H100 pumps and a H80i pump
September 2, 2014 9:21:51 PM

Just buy the watercooling parts, getting H100's is a stupid idea.
a b K Overclocking
September 2, 2014 9:03:51 PM

Are you talking about pulling apart the AIO and using that to power a custom loop? You are better off buying the right gear if that is your goal.

See all answers