Sign in with
Sign up | Sign in

Reply to this thread

Forum question

Started by Superoptimis12 | | 6 answers
CX600M Molex Cable
I have a corsair cx600m PSU. Whenever I try to connect the Molex cable into the PSU my PSU just stops working. Is there a way to fix this with a different modular Molex cable or a new PSU because there are features on my case which can only be used with Molex, and I would like to use them. Thank you for your answers.
  • By posting on this site, I confirm I am over 13 years of age and agree to abide by the site’s rules.

September 10, 2014 7:43:37 PM

SR71 must be right, if under 30 days contact the retailer if over that contact corsair directly.
September 10, 2014 6:54:26 PM

spentshells said:
Try a different slot on the PSU.
Is the molex plug into another device when powering on? If so try powering on with the cable only connected to the psu
If the issue remains try another cable and repeat the steps above.


I tried all your suggestions, but it still won't work. As long as the Molex cable is plugged into the PSU somewhere it won't start up.
September 10, 2014 4:39:35 PM

Try a different slot on the PSU.
Is the molex plug into another device when powering on? If so try powering on with the cable only connected to the psu
If the issue remains try another cable and repeat the steps above.
September 10, 2014 4:38:53 PM

The PSU is defective , RMA it.
September 10, 2014 4:17:56 PM

spentshells said:
Don't connect cables with the computer on or even plugged in for that matter.


I didn't, but when I plugged it in my computer wouldn't turn on. I unplugged it, and it does. I tried plugging it back in, but it still doesn't work.
September 10, 2014 4:12:54 PM

Don't connect cables with the computer on or even plugged in for that matter.

See all answers