Sign in with
Sign up | Sign in

Reply to this thread

Forum question

Started by FawnPC | | 13 answers
Computer freezes then wont boot up
Okay, So this problem happened for the first time 1 week ago, my pc just freezes after a while when I go brb then come back it is frozen, and when I restart it wont boot, and I have reputted everything in it and still wont boot, sometimes I move the psu cables that goes to my hardrives and motherboard and it start like its loose or something but aswell sometimes that wont help, I dont know what it is O.O and I got a good graphic card, had all same but this problem is brand new came after 1 year of using the pc...
  • By posting on this site, I confirm I am over 13 years of age and agree to abide by the site’s rules.

September 16, 2014 7:04:49 PM

iamlegend said:
2 days 15 hours straight? What are you doing?


Im doing nothing? i'm timing if it actually works, and yes that was the problem guys, my pc is fixed, sulution found by myself aswell lol, thx anyway peeps.
September 16, 2014 4:32:45 PM

2 days 15 hours straight? What are you doing?
September 16, 2014 12:00:00 PM

Pc has been running 2 days 15 hours without any problem yet! i think i found the problem! ill update more after 5 days if it doesnt crash.
September 15, 2014 5:09:35 PM

iamlegend said:
Haha, good thing you found a solution.
Good luck man.


I dont know if thats the sulution YET, but i really think it was since everything powered up exept the PROCESSOR and then i found out the ATX cable 4 pins that gives power to processor was broken on top pieces and got more pushed in there and less on the down part and now when i made it perfectly fitted, pc has been running for 1 day 20 hours atm without any problem, we'll see ! :) 
September 15, 2014 4:49:00 PM

Haha, good thing you found a solution.
Good luck man.
September 14, 2014 1:47:31 AM

I found out that the ATX12V wich is the main power cable for the CPU was broken on the top Plastic things wich the pins go in, wich means if i put the cable in it goes more in from top wich means the under ones doesnt get power, so when i put it in and then drag out a bit to make it perfect fitted, now it powers up =D i think this was the problem, i will test it for 3 days, if it doesnt screw up and if it does and dragging back cable helps i will get a new cable, if it just screw up and the cable doesnt help nomore i dont know what to do...
September 14, 2014 1:31:32 AM

FawnPC said:
Mousemonkey said:
FawnPC said:
Watch my language? sir, i dont see where i spoke with a bad language, i think you're mistaken.


The post you submitted 14 September 2014 05:01:00 was deleted by myself but can still be seen by admin, you are fooling no one but yourself.


I did not even use a bad language? O.O i explained about my atxv12 cable, LOL dude..

Check your PM's.
September 14, 2014 1:23:13 AM

Mousemonkey said:
FawnPC said:
Watch my language? sir, i dont see where i spoke with a bad language, i think you're mistaken.


The post you submitted 14 September 2014 05:01:00 was deleted by myself but can still be seen by admin, you are fooling no one but yourself.


I did not even use a bad language? O.O i explained about my atxv12 cable, LOL dude..
September 14, 2014 1:02:07 AM

FawnPC said:
Watch my language? sir, i dont see where i spoke with a bad language, i think you're mistaken.


The post you submitted 14 September 2014 05:01:00 was deleted by myself but can still be seen by admin, you are fooling no one but yourself.
September 14, 2014 12:58:17 AM

Watch my language? sir, i dont see where i spoke with a bad language, i think you're mistaken.

See all answers