Reply to this thread
Forum question
Started by sahil1234 | | 7 answers
so i have an acer h196hql monitor.it worked fine,one day it starts flickering and blacking out like hell.now its listed as generic pnp moniter.its stuck at 1280 res and if i increase it it show input not supported what do i do?
DamonYoules
September 17, 2014 6:02:23 AM
Like i said above, buy both and then just return the stuff you dont use. Though you may need a converter for the vga to dvi as well if you dont already have dvi ports on both the graphics card and monitor.
i would recommend also trying a new vga to hdmi converter as it could be that, and there is no point having to do another trip to the shop if you dont have to.
Remember, more connectors means more to go wrong.
i would recommend also trying a new vga to hdmi converter as it could be that, and there is no point having to do another trip to the shop if you dont have to.
Remember, more connectors means more to go wrong.
sahil1234
September 17, 2014 5:58:42 AM
DamonYoules said:
what you should do is head to the nearest shop that sells the cables and buy both (plus a converter if you need it for the dvi to work). When you get them back home unpackage them very carefull and keep all the packaging and extras etc. Try both the new vga and both the new converters out. If none of it works, then return everything for a full refund (as long as you havent ruined the packaging-check in the shop you can open it without ruining it). If you one combination works then return the rest. Ive had this issue when the cable hasnt been plugged it properly before, which means normally the cable is broken or a port isnt functioning properly. Could also have been if you did a driver wipe sometime though that is unlikely and normally windows fixes it (though i wouldnt say its reliable).
Hope i have helped in some way.
i have been using the same monitor and cable for my previous comp,it happened in that too,soo i guess its the cables problem.shud i buy a new vga or dvi cable also what the diff between dvi and vga,and shud i buy new monitor
DamonYoules
September 17, 2014 5:53:49 AM
what you should do is head to the nearest shop that sells the cables and buy both (plus a converter if you need it for the dvi to work). When you get them back home unpackage them very carefull and keep all the packaging and extras etc. Try both the new vga and both the new converters out. If none of it works, then return everything for a full refund (as long as you havent ruined the packaging-check in the shop you can open it without ruining it). If you one combination works then return the rest.
Ive had this issue when the cable hasnt been plugged it properly before, which means normally the cable is broken or a port isnt functioning properly. Could also have been if you did a driver wipe sometime though that is unlikely and normally windows fixes it (though i wouldnt say its reliable).
Hope i have helped in some way.
Ive had this issue when the cable hasnt been plugged it properly before, which means normally the cable is broken or a port isnt functioning properly. Could also have been if you did a driver wipe sometime though that is unlikely and normally windows fixes it (though i wouldnt say its reliable).
Hope i have helped in some way.
sahil1234
September 17, 2014 5:48:20 AM
DamonYoules said:
Quote:
i use a standard vga cable the one with many holes and two screws,one is connected to the monitor and the other to a hdmi converter.Have you tried using a different vga cable? Also i dont know if your monitor supports it, but tried maybe using DVI at all?
dont have a dvi cable.i have been using this cable for a long time for a few days it works fine and then starts going to hell.
DamonYoules
September 17, 2014 5:42:06 AM
sahil1234
September 17, 2014 5:29:58 AM
DamonYoules
September 17, 2014 5:24:25 AM
See all answers