Sign in with
Sign up | Sign in

Reply to this thread

Discussion

Started by alucke | | 4 answers
Did my video Card & power supply short out
I noticed one of my loose connecters from the power supply, had a melt mark, after the metal in the connecter touched the metal solder points on the graphics card. I am getting ready to upgrade my motherboard and cpu. With my old motherboard and CPU, it won't post. The CPU fan starts and stops, repeatedly. I have a Gigabyte GA-990FXA-UD3 Rev. 4 and fx 8320 being delivered today, via UPS. And I don't want to kill the new MB and CPU, with a bad PSU and Video card. Should I wait till I order a new Video card and PSU to build it? Or should I take the chance and build it anyway. I have no way of testing the PSU or Video card. Any input would be appreciated.
  • By posting on this site, I confirm I am over 13 years of age and agree to abide by the site’s rules.

October 6, 2014 9:50:22 AM

Karsten75 said:
This is the problem when you have no test tools. You can't risk moving a faulty component to the new computer and damaging some of the new components.

A PSU tester costs around $20.


I have a thermaltake tr2 850w PSU. Shouldn't good PSU's have short circuit protect?
a b ) Power supply
a b U Graphics card
a c 114 à CPUs
October 6, 2014 7:57:03 AM

This is the problem when you have no test tools. You can't risk moving a faulty component to the new computer and damaging some of the new components.

A PSU tester costs around $20.
October 6, 2014 7:55:43 AM

Karsten75 said:
Most likely it's toast. Lacking any tools, there isn't really a way for you to determine the scope of the damage. You can try and remove as many components as possible and see if the remainder will POST.


All ready tried that with my current MB and CPU, still nothing. I'm guessing that I shouldn't connect the new MB and CPU, till i get a new PSU and Video Card?
a b ) Power supply
a b U Graphics card
a c 114 à CPUs
October 6, 2014 7:50:50 AM

Most likely it's toast. Lacking any tools, there isn't really a way for you to determine the scope of the damage. You can try and remove as many components as possible and see if the remainder will POST.

See all answers