wanting to know what size i would be able to get away with an not to melt wires or fry my system ( the system consists primary of gigabyte ja-j1800-d2n mobo / lini diy 150w pico psu / 320gb WD HDD and slim dvd rom toshiba L633 i think lol ) im wanting to know if i do an atx extension with 24pins if i can use the ranging of 22awg - 18awg ( i need flex in the wiring cause it's going to be bent over and then up ( it's going into a NES nintendo console ) and 18awg is to stiff in mho so im wanting to know if i can use 22awg or 20awg