Reply to this thread
Forum question
Started by Deving Vini | | 10 answers
i brought new intel DX58OG motherboard for my old i7-930 cpu , the thing is motherboard over heating it's shows 90c to 94c all the time but my fan system is working well .
Deving Vini
October 18, 2014 3:29:04 AM
Deving Vini said:
ya i thought motherboard temp only making that problem , and one more thing on board it has 2x4 pin ATX for CPU power but i use my other computers SMPS which has only 2x2 pin to test that restart problem .random restarts are usually psu related. most probably your mobo wont post if you connect only 4pin out of 8pin power cable for cpu.!only 4pin power cable for cpu means the psu is very weak! if you state your full specs it will be easier to determine the cause of the problem!
Deving Vini
October 18, 2014 1:07:40 AM
Deving Vini
October 17, 2014 2:32:26 PM
Deving Vini said:
i tried all monitoring software shows same result, and how to check fulse reading , is it normal or what ,that sensor depents on your towers ambient temperature. if 95c was an accurate reading then your cpu and gpu would been already dead.! since you already have some basic airflow, anything form 30 to 50c would be somehow accurate. so for that sensor anything higher that your cpu's or gpu's temp is obviously false.
Deving Vini
October 17, 2014 10:36:43 AM
as i have suspected most probably a false reading.it is an irrelevant sensor reading anyway.you can also try HWMonitor to compare the results. i wouldnt worry though!focus on cpu temps. since you are running on stock there isnt anything to worry about! for your cpu, i would suggest reat temp and for your video card, gpuz
Deving Vini
October 17, 2014 9:56:33 AM
See all answers