Tom's Hardware > Forum > Overclocking > Graphics Cards > Guide to Overclocking Video Cards
Ask the community Add a reply
Word :    Username :           
 
derek2006   02-25-2008 at 05:44:18 AM
- 0 +

Last message on previous page:

Evilonigiri wrote :

You can have a little yellow artifacts, they will usually never show in games. That is a very good OC, and by increasing the PCIE frequency to 115MHz, I bet you can hit 700MHz.

The setting should be in the bios.




I have never heard of this before. Currently my 8800GTS is at 650 core, 1620 shader, and 1GHZ non effective ram.

By increasing my PCIe Frequency would it be possible to get something like 675 core and 1650-1700 shader? Also can I get a link on this cause I need to know why it does. I don't understand how it would be possible.

Message quoted 1 times
Reply to derek2006
Sponsored Links
Register or log in to remove.
Gravemind123   02-25-2008 at 06:01:20 AM
- 0 +

Asian PingPong wrote :

Nice guide, but how did you get the 169.21 drivers to work with riva tuner? Whenever I try to open it, it says drivers not detected, etc...and in the box below where it states my video card, it says no information available, and it doesn't display the hardware monitoring icon. Lower, it says forceware detected, but won't let me customize. I have a 8800 gts 512mb from xfx, rivatuner 2.06, 169.21 drivers, windows xp pro. Also, i recently formatted my hard drive, and this problem occurred before the format too.



Are you in XP or Vista? I could not get my 7900 to work with RivaTuner and Vista, but it works fine in RivaTuner and XP.

Reply to Gravemind123
Asian PingPong   02-25-2008 at 01:47:32 PM
- 0 +

Xp pro, and it must be supported, because in the first picture in the original post, the video card is a 8800gts 512, and the drivers are 169.21. When I start it, it says forceware detected, but none of the modification settings appear.
Edit-If it helps, I have a q6600 and p35-ds3l

Message quoted 1 times
Message edited by Asian PingPong on 02-25-2008 at 01:49:14 PM
------------------------------ "Quad cores are only good for burning CD's"
Q6600 @ 3.3 | Xigmatek HDT-S1283 |
8800gts G92 512mb (756/1890/1044) | GA-P35-DS3L
 Reply to Asian PingPong
cnumartyr   02-25-2008 at 03:01:54 PM
- 0 +

Asian PingPong wrote :

Xp pro, and it must be supported, because in the first picture in the original post, the video card is a 8800gts 512, and the drivers are 169.21. When I start it, it says forceware detected, but none of the modification settings appear.
Edit-If it helps, I have a q6600 and p35-ds3l




Go into Rivatuner.CFG and find the following:

G92 =

After the ='s should be some numbers, those are the product codes for the 8800 GT, following those numbers type " ,600h" and that should add 8800 GTS support with the G92.

Message quoted 1 times
------------------------------ TeamBAG Member
 Reply to cnumartyr
Asian PingPong   02-25-2008 at 09:27:04 PM
- 0 +

Works, thank you.

------------------------------ "Quad cores are only good for burning CD's"
Q6600 @ 3.3 | Xigmatek HDT-S1283 |
8800gts G92 512mb (756/1890/1044) | GA-P35-DS3L
 Reply to Asian PingPong
Bronze Overclocking badge Shadow703793   02-27-2008 at 01:54:24 AM
- 0 +

@Everyone: You can substitute ATiTool for RivaTuner 95% of the time.

 

I personally prefer ATiTool over RivaTuner, as ATiTool seems to have better support/ stability. Then again, I do a BIOS mod any way (once I find a stable speed). Check out my 8400GS:
http://www.techpowerup.com/gpuz/vxmx6/

 


cnumartyr wrote :

Go into Rivatuner.CFG and find the following:

 

G92 =

 

After the ='s should be some numbers, those are the product codes for the 8800 GT, following those numbers type " ,600h" and that should add 8800 GTS support with the G92.


Nice :)


Message edited by Shadow703793 on 02-27-2008 at 01:57:40 AM
------------------------------ http://farm3.static.flickr.com/2617/3815217176_0a5be7955d_o.gif
http://farm4.static.flickr.com/3553/3818083596_1a772f7162_o.gif
 Reply to Shadow703793
Evilonigiri   02-27-2008 at 03:00:23 AM
- 0 +

derek2006 wrote :

I have never heard of this before. Currently my 8800GTS is at 650 core, 1620 shader, and 1GHZ non effective ram.

By increasing my PCIe Frequency would it be possible to get something like 675 core and 1650-1700 shader? Also can I get a link on this cause I need to know why it does. I don't understand how it would be possible.


I have tested this for myself and it has worked. Google "PCIe frequency" and you'll see many people getting the same results. As for why, I have not found out yet.

------------------------------ "Nvidia, the Way It's Meant to be PAID Played! - Corrado
*Lesbian Lover Club* - founder Assman
 Reply to Evilonigiri
vocalsyup   03-25-2008 at 10:04:21 PM
- 0 +

I have to GREATLY agree with you on running 3Dmark 06 to test for stability. Very good pointer to give people a much enjoyable gaming experience. Very good guide. All the info seems dead on.
Kudos

Reply to vocalsyup
hitchy   04-05-2008 at 06:18:32 PM
- 0 +

In my rivatuner v2.08 i do not have Fan control tab under driver settings.

i just have : overclocking / compatibility / agp / overlay.

Where is the Fan control?

Reply to hitchy
kenratboy   04-19-2008 at 08:01:32 PM
- 0 +

VERY cool, I will give it a try!

Reply to kenratboy
Raguraman   05-18-2008 at 08:33:56 AM
- 0 +

plese help .... i am new to computers and stuff i got an xfx geforce 8500GT 512mb graphic card . was really exited that i could play great games... 2 days back i downloaded the demo of nfs pro street when i set the video options to the highest potential the screen started to slow down ...... i have a system with core 2duo 2.2 Ghz 2Gb ram windows Xp home edition... and my monitor viewsonic . so is it my graphic that is the problem ? . if so would overclocking(dont know what the hell it is) do any good......

Reply to Raguraman
Gargamel   06-02-2008 at 03:04:00 PM
- 0 +

Following these settings you think I would get more improvement on a 576MHz overclock of a Radeon Sapphire 9600 pro 256Mb?

Reply to Gargamel
jjdefan   06-11-2008 at 11:36:02 PM
- 0 +

I've just recently decided to try my hand at overclocking and have been looking at info on the process. I found this thread and the guide looks pretty thorough, however, all the pictures that go along with it have been deleted from photobucket. Is there another place to see this guide with the pics?

Reply to jjdefan
fatty35   07-02-2008 at 07:24:22 PM
- 0 +

very informative thanks

Reply to fatty35
blackhawk1928   09-30-2008 at 05:03:44 AM
- 0 +

All I can say is that is very well done guide. I am working on overclocking my 8800gts 640mb. It was very well explained and gave me a good insight into the basics of overclocking a GPU. I think my card comes already factory overclocked a bit: 576mhz core, 1350mhz shader, and 900mhz memory. So far I got up at like 620mhz core, 1400mhz shader, and 997mhz memory. I know its bit low for an overclock but I am new at this stuff and I dont want to push and take my time. I do like 5-6minute artifacts scan just to be safe.

Reply to blackhawk1928
skywalker311   10-07-2008 at 05:59:26 AM
- 0 +

I've got a bfg oc2 8800 gt. can u oc it any more.

Reply to skywalker311
tusku   12-10-2008 at 09:00:48 PM
- 0 +

Mate, can we have the pictures in the first post back?

Reply to tusku
Nebelwerfer   01-07-2009 at 10:23:57 PM
- 0 +

I have a MSI R4830 T2D512-OC 7 I think it has a fixed fan speed(also fixed clockspeeds for 2D/3D), so I found these values for the maximum temperatures:
Core 49C, MEMIO 60C, DISPIO 48.5C and Shadercore 57C
I can increase the clocks to from 585/900 to 720/1050 within these limits.

But should I really be concerned about these temperatures since I cant set my fan speed any higher like the guide says I should.

In this review the core is 74C: http://www.tomshardware.com/review [...] 98-13.html
But I dont know about the memory, I dont want the lifetime to decrease too much.

Reply to Nebelwerfer
dingumf   04-21-2009 at 12:22:00 AM
- 0 +

SOMEONE PLEASE FIX THIS GUIDE OR POST A NEW ONE. ALL THE DARN PICS ARE GONE :(

Reply to dingumf
Silverion77   04-29-2009 at 12:22:40 AM
- 0 +

Cnumartyr's gone

U arent going to get the pics back

------------------------------ Antec 1200|Antec Signature 850w|Asus Maximus II Formula|Q9650|4GB Dominator 1066|EVGA 9800GX2
 Reply to Silverion77
randomizer   04-29-2009 at 08:56:53 AM
- 0 +

If you're willing to replace this sticky, and keep it up to date as necessary, PM me.

Reply to randomizer
GTX DREAM   05-13-2009 at 04:25:37 AM
- 0 +

well i have the GeFroce 8600GT and im not sure whether i should overclock it for a game called project torque, or test drive unlimited, but it would be good if it would run a lot faster insted of getting so much lag, and i couldnt be bothered buying the killer anti-lag graphics card when i could probably get a new one lol, anyway, how badly can overclocking also screw up my GPU?

Reply to GTX DREAM
GTX DREAM   05-13-2009 at 04:28:01 AM
- 0 +

btw.. i dont have a fan, i have a copper pipe cooler thingy on my 8600GT, the red one :P

Reply to GTX DREAM
dingumf   07-21-2009 at 01:48:54 AM
- 0 +

Can someone please FIX THE LINKS to THE BROKEN PICTURES???

I don't know why the mods still sticky this

Reply to dingumf
randomizer   07-21-2009 at 02:52:56 AM
- 0 +

Perhaps you didn't read the first line of the OP. It is only stickied because some of the information may still be useful to some people. The image links can't be fixed because the images no longer exist. I'm hoping someone will rewrite the guide at some point but after all this time it doesn't look like anyone is interested.


Message edited by randomizer on 07-21-2009 at 02:53:54 AM
Reply to randomizer
Bronze Overclocking badge overshocked   07-30-2009 at 11:29:10 AM
- 0 +

Randomier, at some point when i find the time i will write a new one that includes details of EVGA precison and volt mod etc.

------------------------------ http://img191.imageshack.us/img191/885/14y1fuqvybiiwayab.gif
 Reply to overshocked
randomizer   07-30-2009 at 01:05:14 PM
- 0 +

Cool. This thing is just pointless now and has been for ages.

Reply to randomizer
Bronze Overclocking badge overshocked   07-30-2009 at 01:10:21 PM
- 0 +

Yeah, LOL i noticed that.

------------------------------ http://img191.imageshack.us/img191/885/14y1fuqvybiiwayab.gif
 Reply to overshocked
nkhlgeorge   08-05-2009 at 03:58:25 PM
- 0 +

hey dude alll the pcitures are missing, care to reupload em plz.

thnx

Reply to nkhlgeorge
randomizer   08-06-2009 at 02:33:56 AM
- 0 +

The OP is long gone, the pictures will never be re-uploaded.

Reply to randomizer
Previous
1 2
Next
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > Graphics Cards > Guide to Overclocking Video Cards
Go to:

There are 567 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 1.154 seconds
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them