|
 |
[Power Supplies, PC Cases & Case Mods] Moving 430w Thermaltake into new rig. Strongest capable video card?
Last matching post:
Maybe read up here for a bit and consider replacing the ol' horse with something besides a ThermalTake.
8800GT is a nice card. So i [...]
|
|
|
edzwoo |
1 |
41 |
Conumdrum 09-06-2008 at 11:39 PM |
|
 |
[CPUs] E6600 Underperforming?
Last matching post:
You have speedstep enabled in the bios. It drops the clocks and voltage down to a lower level when it's not needed. Run Orthos and check C [...]
|
|
|
phulst |
9 |
282 |
phulst 08-30-2008 at 07:41 PM |
|
 |
[CPUs] FX-60 rank
Last matching post:
Behind Intel. There is a nice whetstones chart and influenced by real world programs and gaming benchmarks. Darn if I can't find it, lost [...]
|
|
|
sdf |
5 |
124 |
ohiou_grad_06 08-29-2008 at 07:19 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] PSU for 2 4870X2
Last matching post:
Make sure it has Nukler Reactor attached as GWB would say. I think it will be okay.
We really need feedback in this as it's new territ [...]
|
|
|
Nytmare |
10 |
252 |
dagger 09-05-2008 at 12:04 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] I need a new desktop for gaming and cs3!!
Last matching post:
|
|
|
namutgoon |
3 |
113 |
Conumdrum 08-27-2008 at 04:58 PM |
|
 |
[CPUs] I'm a noob - Clear side panel?
Last matching post:
Go to Danger Den and see the all clear cases they make. The lights and all the other goodies are actually pretty cheap. Welcome to the wor [...]
|
|
|
lulz at my RAM |
18 |
270 |
dragonsprayer 08-26-2008 at 06:47 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] why doesnt my computer turn on? i think something is broke
Last matching post:
Boy, you gave tons of info on your system. I know it has a button, fans, lights, and a hard drive. It could be a MAC or a PC.
With no i [...]
|
|
|
andrew6655321 |
3 |
97 |
Conumdrum 08-25-2008 at 10:01 PM |
|
 |
[Other Components] Any good Video Cards and Soundcards
Last matching post:
Give it up, this has to be a troll.
I can't see any reason to buy anything for that old of a system. Even parts for it are hard to find. [...]
|
|
|
yaoiboimi |
7 |
136 |
chookman 08-26-2008 at 12:23 AM |
|
 |
[Sound Cards] Best sound card for Z-5300e ??
Last matching post:
Does the Mobo and the 5300's have a digital audio connector? I have the 5500's and my mobo has a optical digital out. IF you have digital [...]
|
|
|
andrelyn |
3 |
106 |
andrelyn 08-23-2008 at 03:12 AM |
|
 |
[Sound Cards] Sound card necessary with headphones?
Last matching post:
Mobo audio has VERY poor analog outputs in general. The signal to noise ratio and gains are really not up to par with such outstanding head [...]
|
|
|
bowert28 |
4 |
114 |
halcyon 08-25-2008 at 07:45 PM |
|
 |
[CPUs] About Processor Compatibility and FSB ?
Last matching post:
TVWALLY? And that board is in the Lenovo PC the OP is asking about? Or you just got an OC and are happy and want to share? I'm happy for [...]
|
|
|
varunmehta11 |
5 |
184 |
Conumdrum 08-21-2008 at 04:46 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] How do you figure out if psu big enough?
Last matching post:
60.357 watts unless you bump the VID to 1.43, then it's 77.01 watts more.
It's not by watts, you need a solid 12V rail. A Tier 1 o [...]
|
|
|
speedstar |
3 |
111 |
Conumdrum 08-21-2008 at 04:17 AM |
|
 |
[Other Components] IDE to PCI
Last matching post:
The old DVD burner is probably a ribbon cable and power connector? The new one uses a small SATA connector and a different looking power co [...]
|
|
|
Ktsteel |
2 |
149 |
Ktsteel 08-22-2008 at 02:57 AM |
|
 |
[Other Components] FX-60 and GTX 260 is good!
Last matching post:
When did that processor get released? And when did the Q6600 get released? And the Q6600 easily OC to 3.3, very much more powerful in capa [...]
|
|
|
bviperz |
42 |
753 |
gerardfraser 09-02-2008 at 02:35 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Someone with Antec900 case need comp. help
Last matching post:
It's not best, it's a different way. To connect to the Mobo you need the mini 3 pin connectors. Some fans have them, some don't. If you c [...]
|
|
|
tbates1244 |
6 |
167 |
hnml24 09-04-2008 at 12:59 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] NZXT tempest airflow
Last matching post:
Front blowing in.
Back out
Side in (prolly onto the GPU= good)
Top out
You can probably get better fans.
I wouldn't worry a ton a [...]
|
|
|
eylee86 |
2 |
126 |
Conumdrum 08-18-2008 at 06:17 PM |
|
 |
[CPUs] how far can i overclock my e6600 with standard cooling?
Last matching post:
It's really not mammoth at all. Goggle Thermalright and look at the size of their best CPU cooler. Yours is pretty big, and should handle [...]
|
|
|
NXPS |
11 |
263 |
Conumdrum 08-18-2008 at 04:05 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] PSU... any good??? 12V Rails???
Last matching post:
And OC Forums and xtreme forums. Lots more info there.
|
|
|
b_3d |
4 |
142 |
Shadowthor 08-18-2008 at 05:47 AM |
|
 |
[Other Components] Looking for powerful but silent fan
Last matching post:
It's probably plenty. Put a fan on the other side of the TRUE in Push Pull. It might help a bit. Now we know what your doing with fans is [...]
|
|
|
Nils |
10 |
198 |
Nils 08-17-2008 at 09:08 PM |
|
 |
[Other Components] help
Last matching post:
Okay, there ya go!
Where ever your brain guides you, you pick.
|
|
|
gman123 |
4 |
88 |
orangegator 08-15-2008 at 06:04 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Please recommend an UPs
Last matching post:
Okay, you need a good surge protector, not a battery backup.
A battery backup is a quality surge protector plus a backup to supply ya wit [...]
|
|
|
new2toms |
5 |
100 |
Shadowthor 08-15-2008 at 05:41 AM |
|
 |
[CPUs] chipset depends cpu temp?
Last matching post:
Your CPU mount is bad? Need to redo the HS. Did you use new thermal paste? It's a 100% requirement. MX-2 is good.
Next. What program [...]
|
|
|
jhyukkang |
3 |
97 |
Mondoman 08-15-2008 at 06:07 AM |
|
 |
[Other Components] CPU Fan Control
Last matching post:
Usually in the Mobo bios there is a temp setting for each fan header. You can adjust when the fan is on low, at what temp, change the value [...]
|
|
|
zorrothepiking |
3 |
260 |
grieve 08-14-2008 at 05:11 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Power Supply Wattage
Last matching post:
And become a forum member there, tons of good info etc. Much more info than here.
And xtreme forums also.
|
|
|
donkeywash |
4 |
153 |
jtt283 08-14-2008 at 04:37 PM |
|
 |
[CPUs] Can you fry a CPU this fast without thermal paste/fan?
Last matching post:
ALWAYS install a HS by removing the mobo from the case, always......
You can't be sure the pins are locked unless you look at the bottom [...]
|
|
|
megaten |
10 |
352 |
jasobnd 08-14-2008 at 10:27 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Will this combo WORK E510 PSU GPU
Last matching post:
Ohh, gonna get tons of help with attitude like that.
And you got a Dell to boot.
What is w.e?
|
|
|
Skullfire987 |
25 |
227 |
Skullfire987 08-13-2008 at 07:34 AM |
|
 |
[CPUs] Heatsink Fan Vibration-How It Will Affect The CPU
Last matching post:
Not at all, no worries. Why such massive fans? Your noise level...........
|
|
|
smoothcoco |
4 |
183 |
Vertigon 08-12-2008 at 02:09 PM |
|
 |
[CPUs] CPU TEMP AHHHHHHHHHGG!
Last matching post:
It's possible your case with 80mm fans can't ehaust the heat. Secondly do you have a stock heatsink?
When you took the HS off/on did y [...]
|
|
|
OGC |
6 |
264 |
OGC 07-28-2008 at 04:38 AM |
|
 |
[CPUs] An Intel Fanboy gets caught LYING
Last matching post:
Yep your an AMD fanboi, it is perfectly clear.
|
|
|
enigma067 |
34 |
1311 |
TechnologyCoordinator 07-17-2008 at 12:08 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] about the power supply requirement
Last matching post:
IF it's a quality PSU. AMPS, not watts is what matters.
Read here for a while:
Your GPU card etc needs xxx amps as does other stuff... [...]
|
|
|
tom88 |
6 |
127 |
tom88 07-09-2008 at 05:31 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Best SPU for 4870 CFX
Last matching post:
The best place for SPU also known as PSU on the planet.
And plugs mean little, you need Amps on the +12V rail, what is the req for a 48 [...]
|
|
|
Gazz |
6 |
314 |
Gazz 06-30-2008 at 04:22 AM |
|
 |
[CPUs] Too Hot?
Last matching post:
Get Coretemp. What your using, unless calibrated is usually wrong. My speedfan reads it wrong. It's the way it pulls the info. Coretemp [...]
|
|
|
Shibumi |
17 |
305 |
Shadowthor 06-29-2008 at 05:09 AM |
|
 |
[CPUs] wow am i pissed, Cpu riseing 10C every minute and tops out at 85C
Last matching post:
Looks like Chaos shoulda got a DELL.
|
2 |
|
ChaosGS |
84 |
764 |
iluvgillgill 06-29-2008 at 08:47 PM |
|
 |
[CPUs] Thermalright Ultra-120
Last matching post:
YES, you need a fan. Nothing fancy.
|
|
|
xech |
15 |
367 |
antonmadcow 07-01-2008 at 02:38 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Need Very Powerful PSU
Last matching post:
The Grail of PSU info right here
|
|
|
niiif |
9 |
223 |
Monsta 06-26-2008 at 04:59 AM |
|
 |
[CPUs] Q6600 into a dell xps 410
Last matching post:
I don't even think you can use an E8400. It's a Dell. Bios is very poor and limited on it's mobos. Look into it very very closely before [...]
|
|
|
aza13 |
13 |
425 |
liljone 06-23-2008 at 12:00 AM |
|
 |
[CPUs] e8400 speed question...
Last matching post:
I overclocked with it off and then tested it with it on. Works fine with my OC with it on. Why would I leave it off if it works. It saves [...]
|
|
|
heavymtl |
7 |
287 |
udon 06-15-2008 at 04:56 PM |
|
 |
[CPUs] what will be the expected speed increase?
Last matching post:
Wow.... No one knows exactly.
Lots?
Gonna have to buy a new Mobo, ram, expensive chip.
Got $2000?
Geeze, let me check my magic [...]
|
|
|
daft |
4 |
190 |
WiseCracker 06-08-2008 at 04:25 PM |
|
 |
[CPUs] Quad Core Temps Need Help
Last matching post:
Please post them in C, thats what we all go by. And YES thats too hot, 72C!
Try CoreTemp for temps, speedfan needs calibrated first.
[...]
|
|
|
secolliyn |
6 |
252 |
reynod 05-18-2008 at 01:11 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Zalman 9700 A and Case
Last matching post:
The Zalman fins will never get above barely warm. If you mount the HS right it will never budge unless you drop the whole PC.
|
|
|
Telsiph |
3 |
161 |
Conumdrum 05-16-2008 at 02:27 AM |
|
 |
[Other Components] Cooling Issue
Last matching post:
90-91F? Is that the GPU chip or the GPU chipset? Or the internal case temp? Most of us talk in C here. 91f is nothing at all. Many who [...]
|
|
|
maddcowz13 |
7 |
210 |
maddcowz13 05-08-2008 at 07:29 PM |
|
 |
[CPUs] Is my E8400 running too hot...screen shots & pictures!
Last matching post:
And remount only with the mobo out of the case. You can't check for the proper install while it's in the case. One of the biggest CPU moun [...]
|
|
|
rboarderi |
24 |
1210 |
bwdsmart 04-18-2008 at 07:28 AM |
|
 |
[CPUs] Core 2 Duo E6600 Temperature too high
Last matching post:
Yes, it's not the best temps. I ran 40/53C idle/load (orthos small ffts)
Hope the aftermarket cooler helps. And please the only 'right' [...]
|
|
|
KAOZ |
19 |
453 |
KAOZ 04-21-2008 at 03:45 PM |
|
 |
[CPUs] how to correctly match memory speed with FSB speed?
Last matching post:
You don't match the FSB speed to the memory. You adjust your multiplier and your FSB for the fastest overclock. Like me, I'm running DDR2 [...]
|
|
|
colore |
7 |
588 |
jsc 04-12-2008 at 09:35 PM |
|
 |
[Other Components] Can anyone explain mouse dpi and if its causing me a problem?
Last matching post:
If your having problems shooting peps, meaning you seem to miis when your sure you have them in your sights..........You also say when playi [...]
|
|
|
joneb |
17 |
904 |
nukemaster 04-09-2008 at 06:23 PM |
|
 |
[CPUs] which temp to believe?
Last matching post:
Core temp, used by more of the uber OCers.
Your fine. Now post load temps.
|
|
|
agentofdoom |
8 |
221 |
dagger 03-27-2008 at 02:35 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Liquid Cooling Case
Last matching post:
You still will need fans to cool the liquid. A good WC rig uses 120mm fans on low so it's close to quiet.
Tell us your plans on what k [...]
|
|
|
litomaster |
2 |
234 |
litomaster 03-24-2008 at 01:07 AM |
|
 |
[CPUs] E2200 dual core temp. question...
Last matching post:
Use Coretemp to measure temps. It's kinda the standard for comparison, then we'll know. Also what is your load program? Use Orthos, one m [...]
|
|
|
cesaritox09 |
8 |
619 |
ard37 08-17-2008 at 06:01 PM |
|
 |
[CPUs] 3DMark06 Score Post Them Here
Last matching post:
17,000
Pentium 100
256k ram
Who cares?
|
5 |
|
Walker |
204 |
4433 |
hughyhunter 06-16-2008 at 01:19 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Anech P182 Question
Last matching post:
MAN, HOPE YOU FIND SOMEONE WITH THAT SAME EXACT SAME EXACT solution. Its a good case. Buy a soldering iron, wire, heatshrink, and all the [...]
|
|
|
Clob |
12 |
435 |
geofelt 03-01-2008 at 07:15 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Silent, Cool, Mid Tower?
Last matching post:
Yep, nice case, but look at the Antec 900 too for a great Air cooled case also. The 182 has more room for water cooling, staying air? Then [...]
|
|
|
rkowalk |
4 |
199 |
chookman 02-22-2008 at 03:30 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] What do you prefer Performance or silence
Last matching post:
My Antec 900 with yate loons, a great CPU cooler, and the HR03 for the GPU with a 120mm on low was very quiet. I had it all OC'ed too. So [...]
|
|
|
random1283 |
20 |
667 |
cjp3 02-21-2008 at 11:40 AM |
|
 |
[CPUs] Best Processor to upgrade to - for gaming
Last matching post:
Yes, 250 is too low. Good mobo and processor will cost you that. The GPU is really important today, expect 150 or so for it. You might ne [...]
|
|
|
notanameleft |
41 |
1340 |
Hellboy 02-22-2008 at 09:42 AM |
|
 |
[CPUs] i think one of my sensors on my e2160 is broken
Last matching post:
Try Coretemp and trust it. Speedfan and others use the temps supplied my the mobo makers. They are innacurate. CT reads the code from the [...]
|
|
|
spuddyt |
5 |
258 |
Grimmy 02-18-2008 at 05:10 PM |
|
 |
[CPUs] E8400 vs Q6600
Last matching post:
Level101, so do the research now you know what you need.
|
|
|
level101 |
6 |
826 |
doomsdaydave11 02-19-2008 at 06:29 AM |
|
 |
[CPUs] Best Deal as CompUSA close's
Last matching post:
Behind the times, Las vegas closed already, hope your happy, always some last minute steals....
|
|
|
SoiledBottom |
19 |
728 |
RPAaggieDude 02-22-2008 at 05:09 PM |
|
 |
[Other Components] CPU Cooling Question
Last matching post:
And what is your case like? If you have a front 80mm and a back 80mm and a PSU fan then you'll need a new case. You looking at a new GPU t [...]
|
|
|
armageddon42388 |
3 |
278 |
Conumdrum 02-17-2008 at 12:31 AM |
|
 |
[CPUs] Is my E8400 overheating?
Last matching post:
No paste is bad. Old paste is almost as bad. Turn it off, get paste, then use the info we gave ya.
|
2 |
|
sources |
92 |
2436 |
argada 03-22-2008 at 12:54 AM |
|
 |
[CPUs] cpu OC help, bad components??
Last matching post:
Bios is limited by the mobo and written for a series of mobos. You can't put a monster bios designed for a OC tweakers mobo into a low end [...]
|
|
|
jhyukkang |
5 |
342 |
vtr99 02-15-2008 at 05:13 AM |
|
 |
[CPUs] Temperature Monitoring
Last matching post:
Easy Tune or ANY mobo supplied cooling monitor is always suspect. Coretemp measures what the actual chip is reporting, not some odd uncalib [...]
|
|
|
m4v3r1ck |
15 |
644 |
Grimmy 02-17-2008 at 04:10 PM |

New threads

New messages in an old thread

No new messages

Go to the last read message in a thread you have not participated in

Go to the last read message in a thread you have participated in

Go to the last read message in a Bookmarked thread