»
CPU & Components
|
 |
[CPUs] Motherboard and CPU help (other post didnt work)
Last matching post:
simple answer: can you go to the store where you bought it and have them update the bios,or get a buddy to do the same,after all you know th [...]
|
|
|
rasmusp123 |
3 |
94 |
dragonsprayer 08-28-2008 at 11:53 PM |
|
 |
[CPUs] Need help on very strange CPU problem
Last matching post:
Strange noise,???,are you sure that no wires are touching the cooler?? if not then take it out and shake it gently and listen,and check the [...]
|
|
|
cachirro |
9 |
233 |
cachirro 08-23-2008 at 10:41 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Get sliding motherboard tray or not
Last matching post:
Having had a full tower server case for a number of years,with slide out tray.
I cannot see myself with anything else.
The one great advan [...]
|
|
|
mikeny |
12 |
195 |
mikeny 08-21-2008 at 10:13 PM |
|
 |
[CPUs] how far can i overclock my e6600 with standard cooling?
Last matching post:
IF you look around here on Tom's you can find articles on overclocking,,and there is one that includes the Q6600,which would make a good pla [...]
|
|
|
NXPS |
11 |
247 |
Conumdrum 08-18-2008 at 04:05 PM |
|
 |
[CPUs] Opinions: should AMD give up on CPU?
Last matching post:
In case nobody has noticed ??,AMD is doing not too badly in the high end server market,and in the next little while should get their act som [...]
|
2 |
|
concrum |
57 |
772 |
lolitha 08-17-2008 at 03:10 PM |
|
 |
[CPUs] CPU overheating on new PC build
Last matching post:
Get rid of the stock heat paste use a razor thin application of AC5, AND,, make certain that the hsf is installed as tight as it will go,as [...]
|
|
|
matt3232 |
8 |
161 |
Grimmy 08-16-2008 at 01:55 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Beep Beep Beep
Last matching post:
OR knowing the bios maker you can search bios codes on the net..:> )
|
|
|
tacohead |
2 |
105 |
dokk2 08-15-2008 at 11:23 AM |
|
 |
[CPUs] Uppgrading from A64 X2 3800
Last matching post:
i would venture to say that at first the nehalems will be quite expensive, from reading around the web i get the impression that we might?? [...]
|
|
|
Zygge |
2 |
149 |
spuddyt 08-12-2008 at 03:28 AM |
|
 |
[CPUs] Help, silver compound just applied but temps higher...
Last matching post:
like the old brylcream ad "a little dab'll do ya" and spread it around with something thin and stiff,i usually only put it on the [...]
|
|
|
lljh |
8 |
318 |
dragonsprayer 08-10-2008 at 12:11 AM |
|
 |
[Other Components] I'm about to commit homicide. Help me before I go to jail!
Last matching post:
i think that acpi= application control programming interface??,,any how it is usually means that there is a ram problem,which is caused [...]
|
|
|
Synthetickiller |
16 |
1305 |
Hellboy 08-10-2008 at 12:50 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Help with OCZ's GameXstream 600w/700w
Last matching post:
i'm running an ocz stealthXstream 600w,which hardware secrets.com,,,says ocz could have sold as a700w,,,"how sweet it is"..:> [...]
|
|
|
Tung |
5 |
603 |
dokk2 08-09-2008 at 10:21 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] OCZ GameXstream 700w fan
Last matching post:
when a psu makes an unathorized noise i usually get out my trusty phillips screwdriver and tighten things down,like when i bought an enerma [...]
|
|
|
espguitarguy232 |
20 |
667 |
dokk2 08-09-2008 at 10:11 PM |
|
 |
[CPUs] AMD X2 5000 BE running at 60c idle, Cant get it down.
Last matching post:
re: speedfan,,i just finished running three different versions of it and got fan speeds from 6000-to over 1 million rpm,,and cpu temps in ex [...]
|
|
|
GephAMD |
14 |
202 |
GephAMD 08-09-2008 at 04:35 AM |
|
 |
[CPUs] Which is better overall E8400 or Q6600 for a non-overclocker
Last matching post:
on the other hand,and just to muddy the waters a bit,more and more proggies,including games will/are going to take advantage of multi cores, [...]
|
|
|
Ray Charles |
17 |
263 |
Grimmy 08-07-2008 at 07:30 PM |
|
 |
[Sound Cards] SB live 5.1 card
Last matching post:
i suppose that it depends on your ears,that is if you liked it before,you will after,i have been using one since way back when,,and the only [...]
|
|
|
richj |
7 |
114 |
chookman 08-08-2008 at 01:25 AM |
|
 |
[CPUs] How to best benchmark new CPU
Last matching post:
si soft sandra,,,passmark performance test,,,,everest,,,,..
and check out,,,,,,,,,,,,,,,, majorgeeks.com ,,never know might get lucky.. [...]
|
|
|
gowens |
5 |
169 |
RetiredChief 08-05-2008 at 08:52 PM |
|
 |
[CPUs] amd athlon 64 processor question
Last matching post:
if you are alluding to the onboard memory controller the northbridge of the 939 chipset did have said controller,in fact it supported ddr [...]
|
|
|
jonshardunderwear |
13 |
304 |
rtfm 07-18-2008 at 08:15 PM |
|
 |
[Other Components] New System Build. What to do with open Exp Slots?
Last matching post:
number 1,nvidia now owns physx,2,you can always input the physx driver.
OTOH,if you really want to spend $3k,well then what's a few $$ for [...]
|
|
|
Witt78 |
9 |
204 |
ainarssems 07-18-2008 at 07:48 PM |
|
 |
[CPUs] Want to apply some better thermal paste on my CPU HS
Last matching post:
|
|
|
billin30 |
20 |
295 |
jimmysmitty 07-18-2008 at 09:09 PM |
|
 |
[CPUs] bad cpu?
Last matching post:
for what it's worth the qvl list for your mobo at gigabyte does NOT list G.Skill ram at all,so j.f.t.h.o.i.,,can you try another ram,the qvl [...]
|
|
|
djwazzup06 |
15 |
429 |
Vertigon 07-18-2008 at 05:59 AM |
|
 |
[CPUs] Removing cheap thermal compound
Last matching post:
alcohol.vodka,lighter fluid,acetone,they all work well..:> )
|
|
|
FugBen |
11 |
261 |
MU_Engineer 07-17-2008 at 05:36 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Difference between these PSUs/suggestions?
Last matching post:
DOOOO ,,,,,,,,consider,,, at the very least an Intel P35 based chipset mobo,asus,msi,gigabyte come to mind,after all you should be going for [...]
|
|
|
mgammon |
9 |
183 |
kpo6969 07-13-2008 at 03:09 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] How to install powersupply
Last matching post:
because they are all keyed,as in shaped so as to fit only where they are supposed to go,fr'instance you cannot get a berg,,hdd connector to [...]
|
|
|
kyrax12 |
2 |
129 |
firetatoo 07-11-2008 at 03:41 AM |
|
 |
[Other Components] 3 Pin Fan on 4 Pin Molex
Last matching post:
can you match the colours ,you will only have to match the ground and the hot
,,remember the molex has both 5v and 12v hot lines,if you can [...]
|
|
|
ainsof |
3 |
181 |
ainsof 07-10-2008 at 06:03 PM |
|
 |
[CPUs] E7200 vs E8400 vs Q6600
Last matching post:
well,,you could go with the 8400 for the time being,it's just that by the end of this year,,??,, and next year for sure,, there will be a lo [...]
|
|
|
Dumpy2 |
9 |
967 |
metalogika 07-22-2008 at 08:55 PM |
|
 |
[CPUs] Abnormally high CPU temp. Any ideas why?
Last matching post:
i hear that the arctic cooler freezer 7 pro,really does a good job,best in class??,$36.00cad,50c is only 120f which is not bad,perhaps there [...]
|
|
|
duneman |
10 |
236 |
Mondoman 07-10-2008 at 04:30 AM |
|
 |
[CPUs] Updated CPU drivers
Last matching post:
there is an amd dual core optimizer available check the amd site,the microshaft [ver 5.1.2600.0 is the build # of windoze and components,,or [...]
|
|
|
JimN |
1 |
175 |
dokk2 07-09-2008 at 08:38 AM |
|
 |
[CPUs] Bare minimum upgrade - SSE2 needed but keep old RAM & AGP card
Last matching post:
for what it's worth,,,,, you might consider looking at the local newsgroups in and around your area,,an upgrade to say a 939 chipset would b [...]
|
|
|
crackerbear |
13 |
404 |
wisecracker 07-10-2008 at 03:52 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] When the power supply goes...
Last matching post:
sounds like a dead psu,when my Enermax 320 went south it just sort of got real sloooow.so i got and plugged in an Enermax 420 and lo and beh [...]
|
|
|
matharmony |
10 |
215 |
arson94 07-11-2008 at 11:18 AM |
|
 |
[CPUs] losing time every week
Last matching post:
mobo need new battery,not firmly socketed???:> )
|
|
|
goresnet |
8 |
188 |
goresnet 07-08-2008 at 05:32 PM |
|
 |
[Other Components] 'No Signal' Message when gaming.
Last matching post:
just a thought try using the onboard sound,it seems that i've read/heard of some folks having problems with sb ,,cardz/drivers,and you migh [...]
|
|
|
Kevmesh |
25 |
433 |
kevmesh 07-05-2008 at 01:57 PM |
|
 |
[CPUs] boot errors...
Last matching post:
ATTENTION !! to all posters having weird booting/posting problems..
When windoze crashes ,,usually it shows an error screen and it disappea [...]
|
|
|
tombonator |
8 |
231 |
dokk2 07-03-2008 at 04:39 PM |
|
 |
[CPUs] Nehalem
Last matching post:
I would not be holding my breath waiting,if the rumors are true,and,maybe there is some substance as intel it not making much noise at the m [...]
|
|
|
mrplow99 |
43 |
839 |
jj463rd 07-07-2008 at 09:11 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] need some help here please!!
Last matching post:
no expert here just a few observations,maybe others will chime in...??
why a new case if your current box works then the only reason[ [...]
|
|
|
aerobar900 |
4 |
165 |
ibuypower 06-06-2008 at 04:24 AM |
|
 |
[Sound Cards] NEED to change IRQ...cannot do so in device manager or BIOS
Last matching post:
for whatever it is worth i just checked my sound blaster's irq and 'twas 16,,
that makes me think that all maybe/perhaps,,, SB's or SB emul [...]
|
|
|
magicfreak123 |
6 |
400 |
polarity 05-13-2008 at 04:03 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] 610 silencer only runs 1 video card?
Last matching post:
Will this psu power 2 cards?
no doubt about it,,,,,,,BTW,good buy on the pc&c..:)
|
|
|
divpers |
9 |
301 |
Zorg 04-21-2008 at 11:08 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] What keeps causing my components to die?
Last matching post:
hi toronto,ottawa here sounds like you have a short somewhere in your system,or a loose connection,seems obvious that it's hardware related [...]
|
|
|
moozh |
3 |
309 |
bobbknight 04-03-2008 at 01:44 PM |
|
 |
[CPUs] Why does my computer lock up then reboot?
Last matching post:
just a little thought,seems like a hardware problem,,because you are not reporting any error messages,so the usual suspects are either the r [...]
|
|
|
4745454b |
14 |
573 |
cisco 04-02-2008 at 07:01 AM |
|
 |
[CPUs] Seeking Opinions
Last matching post:
ditto on the 8800 just make sure that your psu has a 6 pin or similar adapter..:) :bounce:
|
|
|
vanderra |
6 |
180 |
lunyone 04-02-2008 at 02:02 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] My Perpetual Case Hunt
Last matching post:
personally i would not look at any case that does not have a removable mobo tray[spoiled i guess] like my present [server] case stands 24in [...]
|
2 |
|
dashbarron |
97 |
4005 |
8bit-micro 04-09-2008 at 09:16 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Should I pounce on this Antec 900?
Last matching post:
the only thing that you need to consider is,does it meet with your needs/wants,needs come before wants always,,and,,if it does,then,GO FOR I [...]
|
|
|
Tron87 |
18 |
497 |
chuckm 03-17-2008 at 11:13 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] 20-pin atx connector in a 24-pin slot?
Last matching post:
some mobo's will work with a 20 pin some will not check the manual,it should work with a 300w psu,,but a 420 or so would be safer,,better sa [...]
|
|
|
mtyermom |
14 |
879 |
mike99 03-16-2008 at 10:19 PM |
|
 |
[CPUs] Q6600 running hot
Last matching post:
you might consider installing a vga cooler that pushes the vga's heat out the back of your case??like the vantec iceberq pro6 [fr'instance], [...]
|
|
|
billiardicus |
23 |
618 |
mtyermom 03-15-2008 at 08:03 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Cross continent power supply issue
Last matching post:
what you need is a universal psu like the 600w OCZ stealthXstream [fr'instance]that will work anywhere canada,usa,europe,australia,etc [...]
|
|
|
Scyle |
17 |
310 |
homerdog 03-15-2008 at 03:15 PM |
|
 |
[Other Components] harddrive problem
Last matching post:
Hmmmm methinks that you might be copying from an ntfs to a fat file system,,no??
cue chorus,,"Been there done that"...:))
|
|
|
syrold |
3 |
191 |
Dirty_Barry 03-15-2008 at 05:39 PM |
|
 |
[CPUs] Quick Thermal Paste Question
Last matching post:
Personally i use lighter fluid for all my cleaning needs it's just like dry cleaning,just got to be paranoid where flame is concerned..:))
|
|
|
_visual |
7 |
337 |
dokk2 03-10-2008 at 05:34 PM |
|
 |
[CPUs] E8400 and GA P35-DS3R rev 1.0
Last matching post:
the only difference between revision 1.0 and 2 is that 2 has more external usb's,,and you might ?? need a bios upgrade for that cpu.
I hope [...]
|
|
|
smartel7070 |
2 |
351 |
dokk2 03-07-2008 at 07:03 AM |
|
 |
[CPUs] E8400 Availibility?
Last matching post:
I read a review the other day on the 8400 and while it was exciting !!! the reviewer,suggested that the q6600 quad might be a better buy con [...]
|
|
|
asdfsystema |
13 |
610 |
elcaminoguy 03-16-2008 at 12:52 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Cheapest Good PSU???
Last matching post:
I paid 90.00cad for an ocz stealthXstream 600 for the a Q6600 setup similar to yours,and while it may be a little bit of over kill there is [...]
|
|
|
rkowalk |
8 |
322 |
dokk2 03-07-2008 at 06:05 AM |
|
 |
[CPUs] Athlon 64 X2 AM2 Dual Core Failure URGENT HELP...
Last matching post:
No question about it RMA the mobo and do it fast,get it to the pos [point of sale ????]
let them experience the same probs as you ,,, O [...]
|
|
|
garethdaine |
15 |
501 |
techguy911 03-03-2008 at 03:53 PM |
|
 |
[CPUs] Question about Motherboard 45NM and how to tell
Last matching post:
go back to newegg and LOOK under the MOBO'S specifications listing
you will find your answer there,,grasshopper.........:)
|
|
|
Artillery |
4 |
274 |
Artillery 02-26-2008 at 02:49 PM |
|
 |
[CPUs] Please please can i have expert help!! :(
Last matching post:
dumb question here..??do you have another hdd that you can test it with sounds like there may?? be a problem with the hdd controller.y [...]
|
|
|
m3ch |
46 |
2102 |
arthurjose 07-03-2007 at 07:00 AM |
 New threads
 New messages in an old thread
 No new messages
 Go to the last read message in a thread you have not participated in
 Go to the last read message in a thread you have participated in
 Go to the last read message in a Bookmarked thread
|
|