|
 |
[CPUs] CPU is dead, did my PSU kill it???
Last matching post:
Many older power supples (those before ATX specification 2.0) did not have sufficient overvolt protection and would fry MBs causing a cascad [...]
|
|
|
sidespar |
9 |
217 |
ejay 11-05-2008 at 11:02 PM |
|
 |
[CPUs] Please help
Last matching post:
From my recollection, the"e" series P4s are of the Prescott 478 variety, and probably not compatible with the GA-81RXP. You would [...]
|
|
|
coolsun |
4 |
93 |
Nik_I 10-20-2008 at 09:50 PM |
|
 |
[Other Components] Installing Antec TriCool
Last matching post:
Many motherboards do not play well with 120s hooked directly to a motherboard header. In these instances, the fan needs to be attached dire [...]
|
|
|
chiana4477 |
10 |
179 |
chiana4477 10-10-2008 at 04:48 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Help with OEM case airflow
Last matching post:
You've got a tough job here. As is the case with most OEMs, the boxes are relatively low volume with few intake/exhaust fans. The 80mm exh [...]
|
|
|
zero10iz |
11 |
292 |
Grimmy 09-19-2008 at 10:56 PM |
|
 |
[CPUs] Relations between cooling and the cpu's lifespan
Last matching post:
Here you go:
"Overclocking early stepping Northwood cores yielded a startling phenomenon. When core voltage (Vcore) was [...]
|
|
|
papermate |
21 |
550 |
sportsfanboy 08-25-2008 at 01:43 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Antec True 1000w, or Toughpower?
Last matching post:
I would recommend the Toughpower. I've had a half dozen Antecs over the past 8 years (all TruePowers), and they all ran hot, two of which c [...]
|
|
|
yaoiboimi |
15 |
326 |
mike99 08-29-2008 at 11:40 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Power supply for HD 4870. Any recommendation? Any good deal?
Last matching post:
Zorg has a good suggestion. Another deal you could consider which has the connections you need is:
Corsair 550 @ 69.99 AR, free sh [...]
|
|
|
ahtze |
6 |
701 |
ejay 08-15-2008 at 03:42 PM |
|
 |
[CPUs] Stock HSF last pin won't go, period
Last matching post:
Grimmy's advice is pretty much on target. You may want to start with the "misbehavin'" pin first. Also, I always try to push two [...]
|
|
|
Incubus2112 |
26 |
384 |
Incubus2112 07-20-2008 at 03:17 PM |
|
 |
[CPUs] Can I get help with this CPU's temps?
Last matching post:
I've experienced this kind of problem before, and in most instances, it was due to the motherboard caps becoming unstable, which happens wit [...]
|
|
|
mustacheman8 |
4 |
219 |
mustacheman8 07-11-2008 at 04:05 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] deciding between antec, and corsair
Last matching post:
I have three 520HX power supplies and they have run cool and flawlessly. Previously, I had an Antec Neo 480 which ran way too hot and raise [...]
|
|
|
jhyukkang |
19 |
655 |
ZOldDude 02-26-2008 at 10:29 PM |
|
 |
[CPUs] P4 3.0ghz RUNNING too hot?
Last matching post:
If it's a Northwood, you are running way too hot!
If it's a Prescott, it's still too hot!
You may have a processor that's on its l [...]
|
|
|
nepo |
17 |
657 |
ejay 02-08-2008 at 11:10 PM |
|
 |
[CPUs] How much do old CPU's bottleneck new games?
Last matching post:
Also interesting is the follow-up article, Part II:
This particular page of the article highlights Oblivion, which is even by toda [...]
|
|
|
Hixbot |
27 |
1332 |
spotless 01-09-2008 at 03:29 PM |
|
 |
[Other Components] Power outage caused weird computer problems
Last matching post:
jaguarxkx offers sound advice. I had the same thing happen several years ago and unfortunately, repair didn't solve all the problems and I [...]
|
|
|
alexoftennis |
2 |
363 |
ejay 01-07-2008 at 04:00 AM |
|
 |
[CPUs] Why is my new build not as fast as I thought it'd be?
Last matching post:
If all you do is surf the web or do light word processing chores, you won't see much of a difference. However, if you do rendering, encoding [...]
|
2 |
|
lej420 |
52 |
1378 |
JustinMcG67 12-24-2007 at 07:27 PM |
|
 |
[CPUs] Overheating C2D E6600
Last matching post:
The case the OP references is a nice case for the average pc user, but may fall short for extended gaming sessions with a hot running gpu. [...]
|
|
|
Knaxx |
17 |
744 |
ejay 12-12-2007 at 03:38 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Sonata III for Q6600 and 8800gt
Last matching post:
For good cooling for hot parts such as the Q6600 and 8600GT, the Sonata line would not be the best choice. As I have upgraded my old Sonata [...]
|
|
|
NubKek |
3 |
704 |
chookman 12-11-2007 at 10:37 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] TH7ii - Aux Connecter Needed For Power Supply
Last matching post:
The old ATX 1.03 power supplies are indeed hard to find. And I don't think that your mb will operate according to specifications without th [...]
|
|
|
hc5831 |
3 |
411 |
tbarry 12-13-2007 at 06:53 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Is my Corsair HX620W dead or just overloaded?
Last matching post:
The Corsair HX series are excellent power supplies and the 620 should be more than adequate for powering your system. Even the best companie [...]
|
|
|
PrimaryComplex |
12 |
437 |
XMSYellowbeard 10-26-2007 at 07:55 PM |
|
 |
[CPUs] Core 2 Duo E2140 vs Pentium 4D 920 (Dual 2.8 Ghz) 4MB Cache
Last matching post:
Probably the 2140 - will be cooler and use less energy as well...Look what the 2160 does to the Pressler...
Good Luck!
|
|
|
generalhoultz |
7 |
1145 |
tlmck 10-21-2007 at 01:40 AM |
|
 |
[Network Interface Cards] True Vista Compatable Wi-Fi Adapters, are there any?
Last matching post:
This is a toughie!!! The latest issue of Maximum PC is very high on the D-Link DIR-655 (November 2007 issue, p. 60), as the top rated 802.1 [...]
|
|
|
Frankenstyle |
3 |
865 |
Frankenstyle 10-08-2007 at 09:38 PM |
|
 |
[CPUs] Pentium 4 3.0 GHz getting to 75-80C
Last matching post:
Wouldn't hurt to take the HSF completely off and clean off all the "caked on" dust, and then reseat with one of the Arctic Silver [...]
|
|
|
nerdcorerocks |
15 |
619 |
nukemaster 09-18-2007 at 08:09 PM |
|
 |
[CPUs] Intel fan installation help (please respond, this is urgent)
Last matching post:
Geofelt is pretty much on target, especially regarding the "diagonal" approach to securing the posts. I have installed several of [...]
|
2 |
|
nukchebi0 |
56 |
1928 |
Zorg 09-17-2007 at 03:36 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Corsair HX620 PSU Owners HELP !!!
Last matching post:
I have a HX520 mated to an E6600, 2 Gig ram, eVga 8800GTS 640, and it runs cool and rock steady even in intense gaming. I have another HX52 [...]
|
|
|
leefuji |
31 |
1119 |
tlmck 08-27-2007 at 09:50 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Which Corsair PSU that fits my new rig now/later?
Last matching post:
I have 3 of the 520s, two mounted with eVga 8800 GTS 640 video cards, E6600s, and each case with 2 gigs of RAM. The third is mounted in an [...]
|
|
|
wrath64 |
11 |
435 |
mousemonkey 08-09-2007 at 07:00 AM |
|
 |
[CPUs] Multi Core: Vista vs. XP
Last matching post:
I noticed that several of you have posted complaints about compatibility between Vista and Creative hardware.
Just curious...for those of [...]
|
|
|
radium02 |
46 |
4258 |
EV700 08-03-2007 at 10:42 PM |
|
 |
[CPUs] Q6600 B3 steppings => temp's too hot?
Last matching post:
f rom bazza: "all I did was add an extra 80mm side panel exhaust(right on top of the CPU FAN) and a makeshift 100mm fan in the 5 1/ [...]
|
3 |
|
wooodman |
144 |
7641 |
nukemaster 08-14-2007 at 04:53 AM |
|
 |
[CPUs] Desesperated!,E6600 won't boot up my PC!
Last matching post:
From what I remember, the original D975BX was not compatible with Conroe, while a later revision, the BX2 was. Which version do you have?
|
|
|
DV2 |
22 |
563 |
DV2 07-28-2007 at 08:46 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] x1950 AGP PSU requirements?
Last matching post:
Yep! You need more power...the Antec 380 is a decent "little" PS but is on the "short" side for powering that X1950! My [...]
|
|
|
craigi |
4 |
676 |
blade85 04-18-2007 at 12:22 AM |
|
 |
[CPUs] Make do with Dresden
Last matching post:
Time, time, time.
is running out, out, out.
Like a duck on a Junebug!
|
2 |
|
Periander |
70 |
4910 |
BaronMatrix 03-27-2007 at 01:57 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Can Corsair 520HX power single 8800GTS?
Last matching post:
Yep, doing it right now! Runs cool, no voltage fluctuations whatsoever!
Works like a champ! My eVga 8800GTS 640 is happy!
|
|
|
brav3h3art |
11 |
895 |
tool_462 03-04-2007 at 11:59 PM |
|
 |
[Network Interface Cards] How do Install my HP LaserJet 4V onto my Network
Last matching post:
It's fairly straightforward. With your particular setup, you will need to go into your router setup and look for "Attached Devices" [...]
|
|
|
ghowthoo |
4 |
2142 |
ghowthoo 10-28-2006 at 08:19 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] TruePower 2.0 480watt 97$ or OCZ ModStream 450Watt 68$ ?
Last matching post:
I would lean towards the Antec TruePower. In addition to rock solid rails, it's got "fan only" connectors which allow the PS to c [...]
|
|
|
Lamy |
10 |
590 |
Pengwin 08-04-2006 at 08:01 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Will Antec p180 quiet this system significantly or not?
Last matching post:
The p180 is an excellent case!
My suggestion probably doesn't fit within your guidelines, but for fans I would consider the Vantec Stealt [...]
|
|
|
faraxon |
10 |
708 |
Pengwin 07-29-2006 at 12:01 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Looking for a good, plain, beige computer case
Last matching post:
Maybe this would do....
...great cooling potential, classic appearance, heavy duty. Sell the PS or keep for a back up.
|
|
|
ronald_mcdonald_9 |
7 |
580 |
jaguarskx 05-18-2006 at 11:03 PM |
|
 |
[CPUs] P3's better than early P4's? is it true or false?
Last matching post:
You might have a tough time finding a dual cpu Tualatin motherboard. You can still find single processor motherboards, i.e.
|
3 |
|
lindochico |
104 |
5254 |
hashv2f16 04-23-2006 at 05:58 AM |

New threads

New messages in an old thread

No new messages

Go to the last read message in a thread you have not participated in

Go to the last read message in a thread you have participated in

Go to the last read message in a Bookmarked thread