|
 |
[CPUs] Pentium D temp
Last matching post:
Don't worry about the temperatures. You aren't ever going to go that high during normal use and in the rare event the processor does die, no [...]
|
|
|
danania1 |
1 |
115 |
jbj190 08-17-2008 at 03:30 AM |
|
 |
[CPUs] Intel Tempetature Fiasco
Last matching post:
That means you're treating a constant as a measurement; in other words, you are failing.
|
|
|
Reynod |
12 |
389 |
turpit 08-16-2008 at 07:44 PM |
|
 |
[CPUs] Is my cpu malfunctioning or did I seat it wrong?
Last matching post:
45nm E8500 sensors aren't accurate when idle anyways. You need to load up the CPU...
|
|
|
shawnhath |
15 |
286 |
Vertigon 08-16-2008 at 10:03 AM |
|
 |
[CPUs] e8400 scoring 4.6 in vista
Last matching post:
It's probably thermal throttling. Redo the heatsink.
|
|
|
boppacesagain08 |
17 |
549 |
geofelt 08-06-2008 at 09:56 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Power Supply (PSU) Advice
Last matching post:
My god people, his configuration will use less than 250 watts total with less than 200W on the 12v rail. Why are you telling him that a gene [...]
|
|
|
Bunford |
12 |
325 |
The_Blood_Raven 04-28-2008 at 06:47 PM |
|
 |
[CPUs] Gold on old CPU's worth anything?
Last matching post:
Related:
|
2 |
|
SUPERCHARGE |
55 |
3055 |
jbj190 04-05-2008 at 09:58 PM |
|
 |
[Other Components] My New Build Please Rate It
Last matching post:
Well if buying immature or superfluous technology is your style, go ahead.
|
|
|
Hella-D |
20 |
687 |
jakebot 07-18-2008 at 08:56 PM |
|
 |
[CPUs] 805 D will it run on a P35 chipset?
Last matching post:
All Pentium D CPUs should run on p35 boards.
|
|
|
swtguy |
11 |
348 |
hairycat101 03-17-2008 at 02:18 PM |
|
 |
[CPUs] CPU
Last matching post:
Can I have what you are smoking?
|
2 |
|
syrold |
55 |
1720 |
johnnyq1233 03-13-2008 at 04:41 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] psu recondations?
Last matching post:
For PC 2, the Antec Earthwatts 430 is overkill. The 380 is just right.
|
|
|
jhyukkang |
32 |
413 |
jhyukkang 03-10-2008 at 06:56 AM |
|
 |
[Other Components] how to get rid of static ???
Last matching post:
Or put the PSU in and plug it into the wall socket. The ground line is connected to the PSU casing which is touching the case. When ever you [...]
|
|
|
nel89 |
14 |
641 |
Grimmy 03-05-2008 at 04:24 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Power Supply Requirment Question
Last matching post:
The difference between most efficient and least efficient load is 2-3% on quality 400w-500w 80+ models.
|
|
|
doomsdaydave11 |
11 |
486 |
lilsage 03-05-2008 at 05:45 AM |
|
 |
[CPUs] Do I need a new computer?
Last matching post:
They're talking about computer part names.
|
|
|
spamhatertom |
30 |
946 |
zpyrd 03-18-2008 at 01:01 AM |
|
 |
[CPUs] When will Wolfdales be back in stock?
Last matching post:
It'll be back in stock the day after you cave in and buy the overstocked q6600s.
|
|
|
eastbayray |
13 |
456 |
Smoked Turkey 02-27-2008 at 10:48 PM |
|
 |
[CPUs] Q6600 Overheating on STOCK speeds??
Last matching post:
Why do some people hate the pushpin design? It isn't exactly rocket science to set it up correctly.
|
2 |
|
eband00 |
68 |
1580 |
valy4u2 03-03-2008 at 12:36 PM |
|
 |
[CPUs] I returned my 8400 today!!!!
Last matching post:
With thermal throttling and thermal trip in place, why would Intel need to provide accurate temperature sensors for the end-user?
|
5 |
|
eternal |
230 |
6668 |
caamsa 06-17-2008 at 01:03 AM |
|
 |
[CPUs] Scratch on the surface of my E8400
Last matching post:
Let me guess, you're a tinfoil hat conspiracy theorist too right?
|
|
|
Moondrinker |
9 |
527 |
jbj190 02-25-2008 at 10:37 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] CM 690 (Major Update to Original Post)
Last matching post:
They're not refurbished. I bought mine for the same price. The only complaint I have against it is that the side panels are bit thin. Other [...]
|
|
|
DirtyDrummer |
16 |
1323 |
jgroves1945 02-26-2008 at 02:28 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Is 380watts enough for this build?
Last matching post:
Unless you're planning to upgrade the CPU or GPU anytime soon, stick with the 380w. Starchbrother doesn't know what he's talking about.
|
|
|
veezee |
23 |
675 |
FrozenGpu 03-04-2008 at 01:42 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] deciding between antec, and corsair
Last matching post:
Your 2600pro will NOT need a minimum of 400w. That card + a quad core + RAID + 1-2 PCI cards will come close to 400w.
|
|
|
jhyukkang |
19 |
616 |
ZOldDude 02-26-2008 at 10:29 PM |
|
 |
[CPUs] UK: E8400 in stock (only 9!)
Last matching post:
eternal: learn to calibrate sensors before you build your own computer.
|
|
|
Viper9201 |
9 |
572 |
FatFunkey 02-24-2008 at 05:45 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] PSU causing 7600GT(AGP) artifacts in TF2/freezing in WoW?
Last matching post:
If that's the actual reading, it means that the PSU is borked. Your PSU might have 12v rails with 14A each but combined, they can only outpu [...]
|
|
|
Chynkinese |
32 |
826 |
Pous 03-03-2008 at 02:49 AM |
|
 |
[CPUs] Overclocking Intel's Wolfdale E8000
Last matching post:
I love how this article takes the Wolfdale up to voltages that has shown to rapidly degrade the CPU and barely mentions that... er.. debilit [...]
|
2 |
|
muk |
60 |
2078 |
hughyhunter 02-22-2008 at 08:09 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] PC power down during POST
Last matching post:
Hah, I've even had UPS delivery throw a box of memory at me.
|
|
|
timberwood |
8 |
267 |
jbj190 02-22-2008 at 01:26 AM |
|
 |
[CPUs] CPU Cooler Charts 2008, Part I - Loosing Your Cool?
Last matching post:
No, quads are not that hot.
|
3 |
|
muk |
141 |
4242 |
bobbknight 07-11-2008 at 10:06 PM |
|
 |
[CPUs] Q6600 Thermal issues
Last matching post:
Those are 45 Tjunctions. I'd say they are normal.
|
|
|
El_Poochino |
12 |
1178 |
systemlord 02-20-2008 at 09:33 AM |
|
 |
[CPUs] 8400 Perfect Sensor its the applications that are wrong??????
Last matching post:
No, Tcase sensor gives the measurement by which Intel specifies the operational parameters of their CPUs. Thermal specification refers to th [...]
|
|
|
Eternal |
4 |
593 |
pausert20 02-18-2008 at 02:50 AM |
|
 |
[CPUs] i think one of my sensors on my e2160 is broken
Last matching post:
Are you sure it's a CPU sensor?
|
|
|
spuddyt |
5 |
263 |
Grimmy 02-18-2008 at 05:10 PM |
|
 |
[CPUs] stupid q6600 question
Last matching post:
You're right.
|
|
|
ds3_09 |
1 |
245 |
jbj190 02-14-2008 at 05:13 AM |
|
 |
[CPUs] amd bulldozer: will it bulldoze or will it be bulldozed?
Last matching post:
I'd laugh my ass off if Intel announced 32nm Pentium V based on NetBurst 2.
|
3 |
|
mikekazik1 |
110 |
4308 |
jimmysmitty 03-13-2008 at 03:32 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] 12V voltage
Last matching post:
If it doesn't cause you problems, don't mess around with it.
|
|
|
jalpaugh1978 |
5 |
317 |
mikeynavy1976 08-19-2008 at 03:36 AM |
|
 |
[CPUs] OK… I concede… recommend an Intel CPU
Last matching post:
E8400 from MicroCenter + GA-P35-DS3L = 300USD
|
|
|
Titanion |
29 |
953 |
yomamafor1 02-28-2008 at 07:49 PM |
|
 |
[CPUs] Phenom Exposed! Shipping with flaky 3rd cores.
Last matching post:
Not blue enough.
|
6 |
|
ragemonkey |
251 |
14509 |
uguv 07-23-2008 at 06:47 PM |
|
 |
[CPUs] New E8400 build help
Last matching post:
The E8400 also uses 2-3watts at idle.
|
|
|
Dirtdog15 |
16 |
908 |
mngdew 02-10-2008 at 09:59 AM |
|
 |
[Other Components] Will extrme cold damage my components?
Last matching post:
I've had UPS employees throw RAM kits at me, saying "Here, it's light."
|
|
|
robertito |
20 |
595 |
Mathos 02-09-2008 at 07:45 AM |
|
 |
[CPUs] Intel sued over Core 2 architechure
Last matching post:
That is where you are wrong. If Intel loses this lawsuit and the injunction goes through, that means hello 300USD mainstream CPUs again.
|
3 |
|
bc4 |
123 |
3114 |
pausert20 02-12-2008 at 09:15 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] How much POWER do *I* need?
Last matching post:
Aevm: A single 8800gt hardly uses 8-9amps. Arstechnica's test show that total system consumption peaks at 360w with SLI 88GT and E6850. The [...]
|
|
|
mcstagger |
14 |
1558 |
aevm 02-08-2008 at 05:58 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] need 6pin to 8pin pcie schematics
Last matching post:
Just go buy an adapter if you're that paranoid. People who have far more Google-fu more or less already answered your question.
|
|
|
darwahan |
12 |
1137 |
darwahan 02-09-2008 at 11:17 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] What kind of graphics card can my PSU support?
Last matching post:
Uh, IIRC, 8800GT barely tops 100w under load. Where does the extra 160w come from in a SLI setup?
|
|
|
divinebaboon |
6 |
394 |
coret 02-02-2008 at 12:21 AM |
|
 |
[CPUs] computer doesn't switch on
Last matching post:
The motherboard maybe shorting on the case.
|
|
|
extinct |
5 |
428 |
Zorg 01-31-2008 at 04:39 AM |
|
 |
[CPUs] Mistake, but, should I? C2D 4600 over my P4 640 HT
Last matching post:
1280x1024. Gets slightly choppy at times but I suspect it's my CPU holding me back.
|
|
|
bachok83 |
15 |
542 |
Grimmy 01-27-2008 at 05:43 PM |
|
 |
[CPUs] Is upgrading from E2180 to E6550/6750 worth it?
Last matching post:
Depends. Games will benefit FPS wise from the extra cache and your overclocking will yield higher returns. Other than that, keep the E2180.
|
|
|
Brutus04 |
8 |
709 |
Brutus04 01-27-2008 at 07:58 PM |
|
 |
[CPUs] E8400 vs Q6600
Last matching post:
That's not the point of the E8400 though.
@JJBlanche: 3.6ghz is in no way a guaranteed figure. I know one guy who took the hype to heart [...]
|
2 |
|
mestizo73 |
51 |
19039 |
maninu69 08-19-2008 at 02:05 PM |
|
 |
[CPUs] Upgrade to E8400 fr E6300 or not? will a OC'd e6300 choke 8800 gt oc?
Last matching post:
If you can push the OC any more on your E6300, keep it. If not, check the performance of your system after upgrading the VGA.
|
|
|
xringx |
5 |
721 |
bob8701 01-27-2008 at 05:26 PM |
|
 |
[CPUs] E8500
Last matching post:
E8400 vs E8500 will probably be like the E6750 vs the E6850 again: little performance/OC difference but a large price disparity.
|
|
|
andro21 |
11 |
1487 |
andro21 01-26-2008 at 05:28 PM |
|
 |
[CPUs] Opinions for CPS's with Supreme Commander and Sup Com (FA)
Last matching post:
There won't be much difference between between those three at their typical maximum overclocks. Most of the game is handled in the monolithi [...]
|
|
|
bugspin23 |
17 |
432 |
jbj190 01-25-2008 at 04:54 AM |
|
 |
[CPUs] E6750, Need help with this!
Last matching post:
Quad core will not benefit SupCom as much as one would think because it's rendering is monolithic... one thread only.
|
|
|
The_Blood_Raven |
6 |
305 |
bugspin23 01-29-2008 at 05:48 PM |
|
 |
[CPUs] E8400 available now in newegg
Last matching post:
There really isn't any need to go E8400 after everyone who wanted to upgrade went E6750 or Q6600 :kaola:
|
|
|
boner |
47 |
1224 |
jbj190 01-23-2008 at 02:02 AM |
|
 |
[CPUs] Convince me about what CPU is best to buy please :)
Last matching post:
You killed it.
|
2 |
|
Shad0w |
63 |
1647 |
Shad0w 01-25-2008 at 12:51 PM |
|
 |
[CPUs] Wolfdale Vs Quad core
Last matching post:
A machine geared for gaming will be much better off with a higher performance video card than a quad core CPU. Your argument assumes that th [...]
|
2 |
|
evolmonster |
58 |
2238 |
Thanatos421 01-23-2008 at 04:45 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Probably a dumb question, but...
Last matching post:
They are the same voltages though so it would make sense that they are.
|
|
|
Josiah30 |
19 |
485 |
jbj190 01-22-2008 at 09:37 PM |
|
 |
[CPUs] To upgrade Pentium D 2.8 to E8400/ 6750... help!
Last matching post:
You have to do a fresh install with a non-OEM copy anyways. It will bluescreen on boot and cannot be repaired because it bluescreens when bo [...]
|
|
|
nforce256 |
15 |
931 |
nforce256 01-21-2008 at 01:00 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Do I need a new power supply....
Last matching post:
You should be fine.
|
|
|
Swift_owL |
2 |
267 |
zenmaster 01-20-2008 at 06:19 PM |
|
 |
[CPUs] Phenom users 2.....
Last matching post:
Er, the quality of the IHS at 2000grit?
|
2 |
|
EdzBourne |
70 |
1812 |
TSIMonster 01-18-2008 at 01:44 AM |
|
 |
[CPUs] E8500 or Q6600?
Last matching post:
Both E8500 and E8400 should hit the processor limit without the FSB being a problem. Remember, the Penryns also have a 10% IPC advantage ove [...]
|
|
|
JJBlanche |
14 |
3910 |
Beurling 01-17-2008 at 07:23 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] This is why Fry's sucks
Last matching post:
What, and screw over someone else that ordered before you?
|
|
|
jeremyrailton |
43 |
1447 |
jeremyrailton 02-11-2008 at 05:37 PM |
|
 |
[CPUs] Phenom users............
Last matching post:
If you already have a C2D, why are you considering Phenom? The monolithic design will have no impact on applications and as of now, it's pur [...]
|
|
|
EdzBourne |
20 |
1016 |
keithlm 01-16-2008 at 05:18 PM |
|
 |
[CPUs] MSI-P35 Platinum/Q6600 High temps!!!!
Last matching post:
You can remove the HSF shroud since it's apparently just clipped on. Also, push the clips in diagonal pairs to keep the load even.
|
|
|
bozobytes |
12 |
1104 |
Ripper123 10-04-2008 at 02:25 AM |
|
 |
[CPUs] CPU AND RAM ???
Last matching post:
Because DDR2-800 is 1:1 at 400FSB which is easily hit by Core2 CPUs. I've seen FSBs pushing or exceeding 500FSB too.
|
|
|
nel |
3 |
219 |
random1283 01-13-2008 at 09:05 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] I need some insight onto a PSU
Last matching post:
|
|
|
PhaT |
5 |
246 |
PhaT 01-13-2008 at 06:16 PM |

New threads

New messages in an old thread

No new messages

Go to the last read message in a thread you have not participated in

Go to the last read message in a thread you have participated in

Go to the last read message in a Bookmarked thread