|
 |
[Power Supplies, PC Cases & Case Mods] Xigmatek HDT-S1283 fit in Armor VA8003BWS?
|
|
|
jerreece |
1 |
177 |
jerreece 11-11-2008 at 06:38 PM |
|
 |
[CPUs] Processor - How Much Is Too Less? Ultimate!
Last matching post:
I'm with TC on this one. Lots of contradictions in this post. However, quad core is the direction things are going. And if you do much v [...]
|
|
|
kuber |
7 |
224 |
thogrom 11-18-2008 at 04:29 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] I needed help desiding on a low end power supply
Last matching post:
I'm with geofelt. Power Supplies are not the best place to save money. Cheap power supplies are just that, cheap. I've never had good lu [...]
|
|
|
coltoe |
6 |
80 |
geofelt 11-18-2008 at 02:22 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Will my pc handle MMO (WAR/CoD4) will it over-heat??
Last matching post:
Wow 8GB of RAM. More than you need for sure!! Only limitation there is the video card. That HD 3650 256MB is a little behind the curve. Bett [...]
|
|
|
gcranium1 |
6 |
177 |
Zorg 11-16-2008 at 04:03 AM |
|
 |
[CPUs] can't turn on pc...please help!
Last matching post:
So your PC suddenly stopped turning on, and you purchased a new PSU in attempt to resolve this issue correct?
As would be normal, check a [...]
|
|
|
josh1119 |
5 |
90 |
will_chellam 11-15-2008 at 10:12 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Q6600 Power Supply - 8 Pin vs 4 Pin
Last matching post:
Sounds like you have some other troubleshooting to do. I doubt your problem is related to your CPU power connector. Does your motherboar [...]
|
|
|
ffejie |
15 |
4895 |
jerreece 11-14-2008 at 07:07 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] PSU audibly "popped"?
Last matching post:
Hopefully one would remember to unplug the power supply at both ends before disassembling it. :D
To the OP: It sounds most likely t [...]
|
|
|
c999 |
8 |
215 |
jerreece 11-11-2008 at 06:46 PM |
|
 |
[CPUs] Do I need to buy thermal grease for a new cpu with stock cooling?
Last matching post:
If the CPU comes with a cooling fan (Most Retail boxed CPUs will), then you don't have to.
Personally however, I don't like using 'stock' [...]
|
|
|
ipoopfool |
5 |
156 |
ipoopfool 11-01-2008 at 10:47 PM |
|
 |
[CPUs] Need a budget cpu fan
Last matching post:
Q6600's run pretty warm. Even for a month, personally I wouldn't stick a really cheap store bought fan on mine. Unless you have a good compu [...]
|
|
|
Gareth2061 |
6 |
228 |
br3nd064 11-01-2008 at 01:58 AM |
|
 |
[CPUs] Intel Core 2 Quad 6600 or 9300 ?
Last matching post:
I see the Q9300 @ $249 over at Newegg.com
The Q6600 @ $189.99 at Newegg.com.
Got both prices through (site that compiles prices at mul [...]
|
|
|
hector1403 |
5 |
379 |
hector1403 10-29-2008 at 11:57 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Video Card / Power Supply - Overheating?
Last matching post:
I'm going to say your problem is definitely related to your PSU and the lower video card. That Power Supply is designed for a top mount in t [...]
|
|
|
NoisyMonk |
15 |
585 |
JohnnyLucky 10-30-2008 at 08:42 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Wierd stock power supply in my system. got 20 pins when really has 24?
Last matching post:
If you replace your PSU for some reason, and it has a 20+4PIN connector, you'll be fine. If your motherboard only needs 20 pins, you can jus [...]
|
|
|
aj95 |
5 |
100 |
skywalker9952 10-22-2008 at 06:28 AM |
|
 |
[CPUs] Bottleneck... Which Component...?? Opinions Needed
Last matching post:
CPU is definitely his bottleneck. My wife's system runs my old AMD 4400+ and I wouldn't dare push Crysis onto her system.
That 8800GTS (5 [...]
|
|
|
alphakp295 |
9 |
287 |
NewLCD123 10-20-2008 at 09:30 PM |
|
 |
[CPUs] Isn't Dual Core Future-Proof?
Last matching post:
I think I hate Flame Threads more than Future Proof threads.
|
|
|
Nightsilencer |
39 |
933 |
gamerk316 10-20-2008 at 05:10 PM |
|
 |
[CPUs] High GHZ dual core or low GHz quad core??
Last matching post:
He's right in that this question is asked on these forums every single day.
Generally though, most folks agree that the high GHZ Dual [...]
|
|
|
ebaugh |
19 |
585 |
BadTrip 10-18-2008 at 03:35 AM |
|
 |
[CPUs] Q6600 upgrade to Q9650
Last matching post:
Ironically, I was just telling my wife 20 minutes ago how I hated threads like these. Where folks with way to much money to waste come onto [...]
|
|
|
Unscrupulous |
18 |
1032 |
Reynod 10-17-2008 at 12:07 PM |
|
 |
[CPUs] Bang for my.... E8500!!!
Last matching post:
If your Zalman cooler is really loose, then it may need adjusted.
However, if you're getting 44C at 100% CPU usage, you're absolutely was [...]
|
|
|
werxen |
6 |
679 |
jerreece 10-16-2008 at 01:18 AM |
|
 |
[CPUs] Quad core or Dual core
Last matching post:
I run a Q6600 at stock speeds (2.4Ghz). I've noticed, at least under Vista 64bit, that Warhammer Online seems to thread pretty well. It'll u [...]
|
|
|
b335t |
6 |
705 |
b335t 10-16-2008 at 09:52 PM |
|
 |
[CPUs] E8400 idle temps - first switch on today.
Last matching post:
I'd say you're doing pretty good with that particular cooler. It really doesn't have much surface area for heat dissipation. Not very much c [...]
|
|
|
jonisginger |
11 |
198 |
jonisginger 10-15-2008 at 12:09 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] CM Cosmos Cusomt paints
Last matching post:
I suppose you could find a local shop that does airbrush or custom auto paint jobs, befriend one of their artists, and see if you can score [...]
|
|
|
psr |
7 |
190 |
JohnnyLucky 10-12-2008 at 06:02 PM |
|
 |
[CPUs] Q6600 weird temp behaviour
Last matching post:
I've used Asus boards before. Great motherboards. But their PC Probe software is... horrible.
I like to use Core Temp.
|
|
|
kblue25 |
13 |
153 |
pcgamer12 10-11-2008 at 11:43 PM |
|
 |
[CPUs] AMD quad core or Intel dual core
Last matching post:
If you want a Quad Core (which is preferable for video and audio encoding since most of that software uses multiple cores now days) get an I [...]
|
|
|
Sable Wanderer |
7 |
275 |
jerreece 10-11-2008 at 06:27 PM |
|
 |
[CPUs] Upgrading and.... Bottlenecking.
Last matching post:
Yes, that 4200+ is a bottleneck.
|
|
|
rahrah |
15 |
297 |
rahrah 10-09-2008 at 08:59 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Best Gaming case in your opinion??
Last matching post:
If size is a concern, you're probably best off looking at Mid-Towers geared specifically for gaming. I already had a Full-Tower from Antec, [...]
|
|
|
kuanaco |
21 |
486 |
JohnnyLucky 10-11-2008 at 09:22 PM |
|
 |
[CPUs] wrong forum...
Last matching post:
OC'ing the Q6600 has more to do with your motherboard. For example, if you use the board I do (680i LT) you won't get an OC worth crap.
I [...]
|
|
|
Nica Guy |
22 |
294 |
spathotan 10-04-2008 at 07:08 AM |
|
 |
[CPUs] CPU FSB 1333 but MOBO FSB 1066???
Last matching post:
The question is whether that BIOS upgrade simply allows the e8400 to work, or if it actually allows that motherboard to support an FSB of 13 [...]
|
|
|
boomer2point0 |
1 |
208 |
jerreece 10-03-2008 at 10:49 PM |
|
 |
[CPUs] Q6600 : Are These Temps Right?
Last matching post:
Use Core Temp for monitoring temps. It's the way to go. Also, make sure it recognizes your 4th core. If you're only able to find 3 cores, yo [...]
|
|
|
SnuffleKitty |
29 |
436 |
SnuffleKitty 10-03-2008 at 07:03 PM |
|
 |
[CPUs] Please help me on choosing a CPU for my gaming rig
Last matching post:
Poor UltimaSlayer VII :( His self-esteem raising system idea got whacked by the Put-Down Monster :(
I wish I had the kind of money he wan [...]
|
2 |
|
UltimaSlayerVII |
76 |
823 |
roofus 11-13-2008 at 03:19 AM |
|
 |
[CPUs] My CPU is stuck to the motherboard
Last matching post:
Yeah I'm running an AMD 3500+ on an 939 nForce 4 mobo right now (lol my current motherboard for my Q6600 took a crap a couple days ago). Tho [...]
|
|
|
hollegrehen |
7 |
328 |
hollegrehen 09-11-2008 at 09:24 PM |
|
 |
[CPUs] RAM is fine but even so i do get memory problems
Last matching post:
Sounds like perhaps you've got some CPU usage problems. Your temps are fine. I'd suggest that when your PC is acting this way (being very sl [...]
|
|
|
BananaJoe |
18 |
364 |
Grimmy 09-07-2008 at 03:26 PM |
|
 |
[CPUs] Need help on very strange CPU problem
Last matching post:
I have had a similar problem with my motherboard. I was specifically using "Everest" to monitor temps under load. For me, it turne [...]
|
|
|
cachirro |
9 |
291 |
cachirro 08-23-2008 at 10:41 PM |
|
 |
[CPUs] e8400 scoring 4.6 in vista
Last matching post:
Dang I posted to late. lol Anyhow, nice. Glad things are running cooler. :) 60C at stock temps does seem a little high for a decent afte [...]
|
|
|
boppacesagain08 |
17 |
600 |
geofelt 08-06-2008 at 09:56 PM |
|
 |
[Other Components] CPU FAN ERROR!!! <-- In the words of Asus
Last matching post:
Are you using Asus Probe by chance? I know with Asus boards I've had in the past, I have tried using their PC monitoring software. Never enj [...]
|
|
|
apel444 |
3 |
396 |
Almost Smart 11-01-2008 at 08:52 PM |
|
 |
[CPUs] Updating advice with an AMD athlon 64 FX 55 porcessor
Last matching post:
Your motherboard supports the 939 CPU socket type, which has basically been phased out, and replaced by the AM2 socket type for AMD processo [...]
|
|
|
Embra |
18 |
371 |
jj463rd 08-06-2008 at 05:46 AM |
|
 |
[CPUs] Q6600 Running at 78℃ During Idle, NOT OC'd
Last matching post:
Oh wow I totally missed that part my first read through. Yes, that is likely your problem. Shut down your system as soon as possible. Ta [...]
|
|
|
johnjm22 |
6 |
260 |
tekzor 07-20-2008 at 01:40 AM |
|
 |
[CPUs] Uprgrading to E8400 what about my O/S?
Last matching post:
Far as I know you'd have no problem. Biggest conflict with Windows XP & newer is the motherboard FAIK.
|
|
|
ThePatriot |
5 |
202 |
ThePatriot 07-19-2008 at 03:07 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Corsair TX 750W CrossFire
Last matching post:
I'm not a GPU/PSU expert, but from what I understand it's more of an Amperage thing than wattage. I can't imagine you'd need 850W to run [...]
|
|
|
micky84 |
9 |
382 |
homerdog 07-17-2008 at 03:40 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] nforce 680i 8-pin
Last matching post:
I've got the same thing. Stuck my 4-pin CPU power connector in the center of the 8pin and it works fine. The manual says they "recommen [...]
|
|
|
civic |
3 |
211 |
civic 07-08-2008 at 07:45 PM |
|
 |
[Other Components] Is this PC configuration good??
Last matching post:
I'd say your original build is fine. Though there's some good recomendations above (such as Intel chipset instead of nVidia (790i). I've got [...]
|
|
|
Kezz187 |
9 |
358 |
Kezz187 07-02-2008 at 12:27 AM |
|
 |
[CPUs] Too Hot?
Last matching post:
I'm not as big on the "looks" of my PC tower. Then again, my tower sits on the floor beside my desk where I can't see it. So havin [...]
|
|
|
Shibumi |
17 |
332 |
Shadowthor 06-29-2008 at 05:09 AM |
|
 |
[CPUs] AMD vs Intel
Last matching post:
[b]jonbull
Offline
Profile: stranger
More Information
Age : 18 years
Gender : Male
posts : 1
Joined : Tue Jun 24, 2008
[...]
|
|
|
jonbull |
47 |
1282 |
MathiasSchnell 06-26-2008 at 06:31 AM |
|
 |
[CPUs] 11809 in 3DMark05 is that good?
Last matching post:
From my understanding, this is due to the fact that Vista is more compatable with Mult-core processors than XP. So that Q6600 is getting [...]
|
|
|
bigbeef2604 |
23 |
938 |
Grimmy 06-22-2008 at 04:01 PM |
|
 |
[CPUs] AMD Phenom instead of Intel Core2Quad Q6600 would you recommend?
Last matching post:
My vote is definitely for Q6600, or some other Intel Quad.
|
2 |
|
omermaras |
63 |
4514 |
MU_Engineer 06-23-2008 at 06:32 AM |
|
 |
[CPUs] Crysis on a budget...
Last matching post:
Am I the only one that doesn't quite understand what he/she just said?
|
2 |
|
mikerose79 |
66 |
1614 |
Vertigon 07-06-2008 at 09:01 PM |
|
 |
[CPUs] Thermal Limitations of Athalon x2 4200+
Last matching post:
Here's AMD's technical specs for Thermal limits on the AMD X2 units (this document is for AM2 chips).
Actually, page 18 Lists AMD Part [...]
|
|
|
Preclude |
4 |
257 |
amdfangirl 06-22-2008 at 06:25 AM |
|
 |
[CPUs] e84 or q66? games & multitasking
Last matching post:
Q6600 for sure. You sound like the perfect candidate for Quad Core processing. Multi-Tasking is exactly what Quads are for.
If you want t [...]
|
|
|
z_dori |
7 |
389 |
mousemonkey 06-26-2008 at 07:30 PM |
|
 |
[CPUs] Having trouble choosing quad/dual
Last matching post:
My experience from building/rebuilding my PCs over the years has accumulated to this:
If you want to keep from upgrading for as long as p [...]
|
|
|
vsdagama |
17 |
526 |
theodric 06-16-2008 at 11:16 PM |
|
 |
[Other Components] How computer savvy are you?
Last matching post:
LOL
I took a "Basic" class back in High School. Never went any further than that. LOL After learning it I tried to code my [...]
|
|
|
elitesystem |
35 |
788 |
lucuis 05-20-2008 at 04:46 AM |
|
 |
[CPUs] Help with q6600 ID
Last matching post:
Mine says it is Stepping B3 but also shows "Revision G0". I also have "Slacr" on the chip itself. LOL I had the same [...]
|
|
|
Rheagar |
15 |
1339 |
jerreece 05-13-2008 at 11:35 PM |
|
 |
[CPUs] Nehalem: The End Of Mainstream Overclocking?!
Last matching post:
If this story did in fact turn out to be true, I think I'd end up going back to AMD. (I'm on my first Intel CPU ever). I'd like the "ab [...]
|
2 |
|
dattimr |
76 |
1235 |
amdfangirl 05-12-2008 at 02:35 PM |
|
 |
[CPUs] Q6600 Voltage settings and SpeedStep, etc. ???
Last matching post:
Definitely upgrade your HSF. I have my Q6600 OC'd to 3.32Ghz and it idles in the BIOS in the 40's celsius. If you're at the stock 2.4Ghz @ 5 [...]
|
|
|
konoplya |
4 |
482 |
konoplya 05-10-2008 at 09:37 AM |
|
 |
[CPUs] Do Q6600 run hot??
Last matching post:
I'm running the Q6600 G0 stepping on a 680i mobo. I don't have the 'stock' fan but I've got a pretty cheap cooler on it, and I idle at about [...]
|
|
|
xplicid001 |
11 |
531 |
jerreece 05-05-2008 at 09:35 PM |

New threads

New messages in an old thread

No new messages

Go to the last read message in a thread you have not participated in

Go to the last read message in a thread you have participated in

Go to the last read message in a Bookmarked thread