|
 |
[Sound Cards] onboard sound vs. stand alone sound card
Last matching post:
When playing games, a good souncard will provide 3d sound support such as EAX, and also will provide more 'voices' for sound effects, giving [...]
|
|
|
doomhammr |
11 |
159 |
doomhammr 10-10-2008 at 10:27 PM |
|
 |
[Other Components] New Computer Freezing - Please Help!
Last matching post:
If you have cheap noname PSU it may be overheating, or not moving enough air and causing case to overheat. How hot is air from rear of PSU? [...]
|
|
|
felixman11 |
6 |
144 |
felixman11 10-09-2008 at 01:01 AM |
|
 |
[CPUs] How much CPU heat is too much?
Last matching post:
If you7 are not overclocking, stock cooler should be fine. Check all 4 pushpins are fully engaged, or safer, remove, clean and reapply therm [...]
|
|
|
fatalGlory |
8 |
290 |
njdrew 10-02-2008 at 03:24 PM |
|
 |
[CPUs] should i wait?
Last matching post:
Then you are not serious about getting the best performance!
If you don't want to waste money, do more research before buying! :non:
As [...]
|
|
|
kommakazi06 |
7 |
149 |
crowheart27us 10-01-2008 at 12:35 PM |
|
 |
[CPUs] CPU without compound
Last matching post:
Sounds more like a problem with memory or HD, CPU shouldn't have a problem until 70C or more. Run Memtest86 overnight, Could also be PSU, wh [...]
|
|
|
cimpercee |
10 |
195 |
cimpercee 09-30-2008 at 12:28 PM |
|
 |
[CPUs] Would a q6600 run great with a 9800 gtx?
Last matching post:
First, try fixing your present system. Either your HS is NOT fully in contact with CPU, or your fan is running slow, or your HS is clogged w [...]
|
|
|
Cymus |
8 |
258 |
IronSight 09-29-2008 at 03:37 PM |
|
 |
[CPUs] Phenom 9600 temp issues.
Last matching post:
What PSU? Your 12V is a bit low! :ouch: Use a meter to check volts, some motherboard sensors are a bit inaccurate. Is that the correct Vcc? [...]
|
|
|
alex7391 |
5 |
145 |
mike99 09-26-2008 at 11:36 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Is my PSU a little too toasty?
Last matching post:
How warm is the air from rear of PSU? Does it feel like 50C? Sensor reading may be inaccurate. What other case fans? You may not have enough [...]
|
|
|
fruees |
2 |
128 |
mike99 09-25-2008 at 02:32 PM |
|
 |
[Other Components] Fan not running full rpm. help maan!
Last matching post:
RTFM !! :non: If you don't know what that means, look it up!
Mike.
|
|
|
wiggy420 |
7 |
197 |
chookman 09-26-2008 at 01:33 AM |
|
 |
[CPUs] HP dx2400 with E7200 CPU Stuck at 1.6GHz
Last matching post:
SPEEDSTEP ! GIYF Google is your Friend. As mentioned above, if loading the CPU does ot make it run at the correct speed, get HP to fix it.
|
|
|
graphicequaliser |
19 |
388 |
graphicequaliser 09-30-2008 at 03:58 PM |
|
 |
[CPUs] CPU confusion
Last matching post:
What make/model is that PSU/? What display resolution? SLI does not help much at 1280x1024. What games are you having problems with?
[...]
|
|
|
radiohead08 |
6 |
215 |
englandr753 09-23-2008 at 03:11 PM |
|
 |
[Other Components] PLEASE HELP ME
Last matching post:
For consistant test, try 3dMark06 and let Speedfan monitor GPU temp, it may overheat under load. What temp does your CPU reach on full load? [...]
|
|
|
darkside44 |
11 |
171 |
darkside44 09-23-2008 at 10:43 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Will this power supply be enough for my rig?
Last matching post:
What display are you planning to use? Extra performance from 3rd 280 is pretty small for what it costs. It would be cheaper to use an electr [...]
|
|
|
UltimaSlayerVII |
6 |
214 |
bobbknight 09-22-2008 at 05:26 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] could this system handle hd4670?
Last matching post:
That is very close, and it may well bottleneck on the Sempron CPU. If you plan to upgrade to an x2 5000 or higher, you would be better to ge [...]
|
|
|
boomshine |
5 |
253 |
invisik 09-19-2008 at 12:40 PM |
|
 |
[CPUs] cpu frequency in bios
Last matching post:
Run CPU-Z to check speed.
Mike
|
|
|
baphemat |
4 |
138 |
Nik_I 09-18-2008 at 03:14 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Build Instability
Last matching post:
Run Memtest86. Run Speedfan to monitor your 12V line. If shows excessive variations, RMA the PSU. The rating is high enough, but it may be f [...]
|
|
|
Myrkul23 |
2 |
91 |
faster3200 09-18-2008 at 05:16 AM |
|
 |
[CPUs] How Nehalem based PCs perform on single thread applications?
Last matching post:
What are you planning to do on this new powerful workstation? If you NEED it now, buy it, there is always something faster 'coming soon'. Wh [...]
|
|
|
hajime |
4 |
304 |
geofelt 09-24-2008 at 06:23 PM |
|
 |
[Other Components] Unable to boot from CD/DVD
Last matching post:
When you make chyanges to the BIOS, are you savig the changes on exit from setup? On the HP system, are you reading the screen, you have to [...]
|
|
|
trygvehe |
9 |
231 |
trygvehe 09-18-2008 at 10:57 AM |
|
 |
[CPUs] New mobo, dead cpu?
Last matching post:
If you have another PSU to test with (motherboard and CPU only) it would point to CPU problem. If you don't yet have another PSU, get a Digi [...]
|
|
|
roofi86 |
10 |
180 |
roofi86 09-17-2008 at 10:41 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] overriding the 8pin connector of the VGA
Last matching post:
Have you checked the box your video card came in? I would expect there to have been a converter cable in there, maybe from 2 molex to 8 pin [...]
|
|
|
baaf |
2 |
85 |
dagger 09-14-2008 at 11:34 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Need help troubleshooting
Last matching post:
That PSU is a very old design, all modern PSUs come with 24 pin power plug for motherboard and power leads for SATA drives. You don't get a [...]
|
|
|
deekster |
5 |
103 |
mike99 09-12-2008 at 11:54 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Will I need a new power supply with this future setup?
Last matching post:
I have been using 20 pin PSU connector with 20 - 24 adapter for a couple of years with no problem.
Mike.
|
|
|
marioblanket |
8 |
181 |
V3NOM 09-13-2008 at 09:44 AM |
|
 |
[Sound Cards] Audio stuttering
Last matching post:
That sounds like audio driver uses a lot of CPU power. Check if there is a later (improved) version. If you fit a sound card it would take [...]
|
|
|
hobbes87 |
12 |
300 |
hobbes87 09-13-2008 at 12:15 AM |
|
 |
[CPUs] CPU running slower than stock speeds
Last matching post:
Your CPU is supposed to be x16, not x12 multiplier. Does the POST screen ID the CPU as D939? If not, you need BIOS update. Do you have CPU s [...]
|
|
|
papermate |
8 |
242 |
mike99 09-10-2008 at 11:22 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Rail balancing with dual 12v rail PSU - need help!
Last matching post:
Max fron CF 3870s is 14A, so should be fine.
Mike
|
|
|
jya252 |
8 |
270 |
4745454b 09-10-2008 at 04:20 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] PSU and ATI 4850 Question
Last matching post:
See
4850 shown at peak of 110W, that PSU should be fine.
Mike.
|
|
|
Mistahrj |
4 |
273 |
englandr753 09-08-2008 at 01:16 PM |
|
 |
[CPUs] CPU not running as intended.
Last matching post:
Have you got latest version of CPU-Z? Does it ID as Pentium 840? Should be 2 cores! When you POST does BIOS display as Pentium 840? You may [...]
|
|
|
pichu |
25 |
424 |
Kari 09-30-2008 at 05:02 PM |
|
 |
[Other Components] Random shutdowns while playing 3D games or video
Last matching post:
Did you uninstall the video driver and re-install with the new card installed? Install Speedfan and monitor the 12V level. If you have a fau [...]
|
|
|
osu191 |
6 |
196 |
osu191 09-04-2008 at 03:37 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] PSU 20-pin into a 24-pin ATX Mobo
Last matching post:
It will work with onboard graphics. If the PSU is 3 or more years old it will have dropped in peak output due to ageing capacitors, and it c [...]
|
|
|
yueli7 |
7 |
332 |
Brian_ 09-04-2008 at 02:28 AM |
|
 |
[Other Components] Wierd monitor Problem..Turns on stays black
Last matching post:
If the monitor doesn't work with laptop and different gfx card on your system, sounds like the monitor is broke! If it's a CRT monitor it wi [...]
|
|
|
TurkzZ |
2 |
143 |
mike99 09-01-2008 at 04:13 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Antec True 1000w, or Toughpower?
Last matching post:
Take a look at
That draws over 1000W when running at full blast. It has a Quad CPU over clocked to 4.4GHz that reaches 90C when water coo [...]
|
|
|
yaoiboimi |
15 |
278 |
mike99 08-29-2008 at 11:40 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] General PSU question
Last matching post:
OOOPS! Wrong 4way connector. That sounds like the one that slots up with the 20way socket to form a 24 way connector. Have another look, the [...]
|
|
|
jbrigan |
3 |
118 |
jbrigan 08-29-2008 at 05:07 PM |
|
 |
[Other Components] HELP!!! Blue Screen Of Death!!!!!
Last matching post:
How are you measuring? Your CPU cannot be cooler than your motherboard, unless you are using active cooling such as vapourchill. What temp i [...]
|
|
|
nickazg |
6 |
252 |
nickazg 08-30-2008 at 11:01 AM |
|
 |
[CPUs] LED's flash once - issue?
Last matching post:
7600Gt only uses peak 36W, so you don't need high rated PSU. Your system would run on a good quality 250W PSU.
Mike.
|
|
|
feo |
11 |
251 |
feo 08-26-2008 at 07:26 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Is this BSOD a power supply problem?
Last matching post:
For PSU info see
Raidmax is Tier 5! Not reccommended. You could install Speedfan, which can draw graph of your 12V output to see if it v [...]
|
|
|
Coreone |
1 |
154 |
mike99 08-22-2008 at 10:41 AM |
|
 |
[Other Components] Hard Drive acting weird
Last matching post:
See
Mike.
|
|
|
TaT3rs |
6 |
151 |
mike99 08-21-2008 at 04:33 PM |
|
 |
[CPUs] CPU will not power up (DIY package)
Last matching post:
What CPU cooler are you using? If it uses the push pins, did you FULLY engage all four? When you push down on the last one, the opposite one [...]
|
|
|
flanc |
8 |
175 |
zipmaster07 08-16-2008 at 12:29 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Cheap 8800 GT PSU
Last matching post:
FSP IS a good PSU! 8800GT uses about 110W, so present PSU should be OK. I am using Hiper 420W with 7800GT and AMD Athlon 64 x2 4200. Total p [...]
|
|
|
Wonderwill |
7 |
182 |
DellUser1 08-16-2008 at 12:18 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] What broke? PSU or VID CARD? HELP!!!!
Last matching post:
If you want useful help you need to post FULL spec, inc PSU make/model. Have you checked CPU and GPU temps? You could open the case and chec [...]
|
|
|
volta |
3 |
140 |
volta 08-12-2008 at 02:06 PM |
|
 |
[CPUs] This is driving me crazy!
Last matching post:
Check memory volts set to correct value. Are you checking CPU and GPU temps? Locking/freezing often caused by heat or HD failing to read req [...]
|
|
|
Spithead051 |
7 |
245 |
Spithead051 08-10-2008 at 02:50 AM |
|
 |
[CPUs] What should i look for in a CPU for gaming
Last matching post:
Don't buy the Dell! :bounce:
You can't overclock, the BIOS is locked. The PSU supplied will probably not support a decent video card. Why [...]
|
|
|
bonanza318 |
24 |
522 |
cjl 08-11-2008 at 09:28 AM |
|
 |
[Other Components] <sigh> Bad RAM BIOS Flash
Last matching post:
Why did you flash the opiginal motherboard? Bad Checksum just means that the CMOS configuration has corrupted, NOT the ROM BIOS code) data. [...]
|
|
|
niyosha |
3 |
204 |
niyosha 08-07-2008 at 11:01 AM |
|
 |
[Other Components] Mouse stops working
Last matching post:
Have you tried another mouse? If so, may be windows problem. Boot a Live Linux CD and see if still a problem. If OK try windows Repair Insta [...]
|
|
|
KS1000 |
5 |
191 |
johnnyq1233 08-07-2008 at 11:31 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Do I need to upgrade?
Last matching post:
If it's working you could leave it at present. That PSU should be similar to a decent 400W PSU. The risk is that if it fails, it may take ot [...]
|
|
|
mwayne5 |
1 |
100 |
mike99 08-05-2008 at 12:10 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] 9600gt and cheap, non pci-e PSU
Last matching post:
On paper, it seems OK, but Enlight is Tier 4, NOT RECCOMMENDED !
See
Poor quality PSUs often quote Peak power, not Max power. They can str [...]
|
|
|
idont |
13 |
325 |
idont 08-05-2008 at 10:42 AM |
|
 |
[CPUs] CPU Upgrade
Last matching post:
CPU-Z also tells you the FSB and memory speed. If you are running at incorrect FSB that would explain it. You may have Speedstep running. Ru [...]
|
|
|
nh484000 |
13 |
350 |
orion1024 08-04-2008 at 03:37 AM |
|
 |
[Other Components] Best HDD for making RAID 0
Last matching post:
If price no object, for performance ......
Mike.
|
|
|
Krat0s |
3 |
306 |
Dave_56 08-01-2008 at 06:53 PM |
|
 |
[Other Components] PC rebooting issue
Last matching post:
What PSU, make/model. Sounds like PSU or motherboard. Easy test is to attach a known good PSU to the PC(no need to actually fit the PSU in t [...]
|
|
|
brucekn |
2 |
158 |
mike99 07-31-2008 at 11:03 AM |
|
 |
[CPUs] CPU-Z reporting 2.224v on e8400 HELP!
Last matching post:
Does your POST screen show the correct CPU description? If not, update your BIOS.
Mike.
|
|
|
willg95 |
24 |
369 |
Zorg 07-31-2008 at 09:13 PM |
|
 |
[CPUs] cpu always at 100 celcious, why?
Last matching post:
That IS your problem! HS has to be CLAMPED to CPU, lots of pressure, finger tight NBG. Get a screwdriver and tighten the screws evenly. Do [...]
|
|
|
dragon-gab |
33 |
740 |
chris312 07-30-2008 at 04:37 AM |
|
 |
[CPUs] Heat sink fan on and off
Last matching post:
Dgonsprayer said
He already has! :lol:
|
|
|
endianx |
6 |
171 |
B-Unit 07-23-2008 at 11:52 PM |
|
 |
[CPUs] CPU on it's way out?
Last matching post:
Install and run 3DMark06 and post your result!
Mike.
|
|
|
vnderachiever |
26 |
556 |
radnor 07-22-2008 at 05:53 PM |
|
 |
[Other Components] cannot boot desktop pc
Last matching post:
Continuous beeps is usually 'No Memory detected. Remove RAM and re-fit, ensure is FULLY inserted.
MIke.
|
|
|
swair_xp |
14 |
381 |
liljone 07-18-2008 at 03:16 AM |
|
 |
[Other Components] All tests fine - but won't boot any OS.
Last matching post:
Is it SATA or PATA HD? If SATA you may need to press F6 and load the SATA driver from diskette at start of install. You may be able to go i [...]
|
|
|
dwfait |
7 |
181 |
dwfait 07-18-2008 at 01:22 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Exploding PSU Warning: Corsair Lab Fun
Last matching post:
Brand X is any (all?) cheap PSU. The UK magazine, Custom PC has done a couple of wide reviws of PSUs and have always found that cheap PSUs c [...]
|
2 |
|
XMSYellowbeard |
66 |
1148 |
Aurora18 07-18-2008 at 08:07 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Loud PSU (three different ones)
Last matching post:
But have you PROVED it's the PSU fan? It's unusual to have a noisy/clicking PSU fan, to have more than one, witha different brand would be l [...]
|
|
|
Mean Deuce |
5 |
210 |
Grimmy 07-15-2008 at 08:00 PM |
|
 |
[CPUs] second core problem
Last matching post:
What Anti Virus? Check for Spyware. Do you mean there is a noise from speakers when you have this problem?
Mike.
|
|
|
greenlooking |
4 |
216 |
greenlooking 07-11-2008 at 07:39 PM |
|
 |
[CPUs] Can I get help with this CPU's temps?
Last matching post:
Does it run cooler if you open the case and let a desk fan blow into it? If so, you need more airflow through the case. Most common cause is [...]
|
|
|
mustacheman8 |
4 |
200 |
mustacheman8 07-11-2008 at 04:05 AM |
|
 |
[CPUs] Which processor to choose with my motherboard
Last matching post:
Sorry dmoz, that Amazon link is an AM2, not S939.
Mike.
|
|
|
dxtr10101 |
8 |
237 |
dmoz 07-11-2008 at 03:06 AM |
|
 |
[CPUs] upgrading processor
Last matching post:
That is a socket A motherboard, it is VERY old. Try HP-Compaq website for info. That CPU is on a 100 MHz FSB, Unless it can run at 133 you w [...]
|
|
|
montauk198 |
12 |
352 |
Mondoman 08-01-2008 at 12:12 AM |

New threads

New messages in an old thread

No new messages

Go to the last read message in a thread you have not participated in

Go to the last read message in a thread you have participated in

Go to the last read message in a Bookmarked thread