Ad
Latest Reviews & Articles
The Hardware Behind Overdrive

The Hardware Behind Overdrive

Published on November 18, 2008

Our worldwide overclocking championship has begun and we wanted to introduce you to the everyday components our teams will be tweaking to supersonic speeds in a bid for a shot at $5,000. Read more

Synology's DS408 Reviewed: Fast NAS For Pros

Synology's DS408 Reviewed: Fast NAS For Pros

Published on November 18, 2008

Does a NAS device with high data transfer rate and a Web interface that is easy to configure actually exist? Synology shows how it should be done. But the enclosure is not without its faults, either. Read more

How To: Get A 4 GHz Dual-Core For $120

How To: Get A 4 GHz Dual-Core For $120

Published on November 17, 2008

Intel’s 45 nm Core 2 serious is known to boast substantial overclocking margins, and the entry-level E7200 with 3 MB L2 cache costs less than $120. We'll show you how to get close to 4 GHz from this little gem. Read more

Team USA Emerges In Round One of Overdrive

Team USA Emerges In Round One of Overdrive

Published on November 17, 2008

After a long weekend of intense benchmarking with nearly 1,300 liters of liquid nitrogen, one team emerged victorious. They’re on their way to Paris to represent the United States against four other international teams. Show them some support! Read more

All the Reviews & Articles
  

Tom's Hardware Forums

»

CPU & Components

 

CPU & Components

Post new message   Click here to post a new poll
The search engine found results in the following sections :


CPUs | Power Supplies, PC Cases & Case Mods | Sound Cards | Network Interface Cards | Other Components
        Thread Last page Thread starter Number of
Rep. Read
Last post
On [CPUs] Installing HSF/Removal and Thermal Paste? Clean & Apply each time?     nforce256 16 800 kentuckyra​nger
01-26-2008 at 12:56 AM
On [Power Supplies, PC Cases & Case Mods] Raidmax Smilodon Casing or Antec 900?! Advice needed, help!     nforce256 4 417 chookman
01-22-2008 at 04:04 AM
On [CPUs] To upgrade Pentium D 2.8 to E8400/ 6750... help!     nforce256 15 971 nforce256
01-21-2008 at 01:00 AM
On [CPUs] Picked up graphics card... to upgrade processor now or not? Help!     nforce256 5 308 jbj190
01-07-2008 at 01:12 AM
On [CPUs] 3DMark06 Score Post Them Here
Last matching post:
3dmark 06 12,653 not bad e8400@3.4ghz, 2gb 667 ddr2, 8800gt 512mb, gigabyte p35-ds3l
5   Walker 204 4661 hughyhunte​r
06-16-2008 at 01:19 AM
On [CPUs] Worth the upgrade?
Last matching post:
What exactly is your budget? Try seeing if you can snatch a 7900 on Ebay. I bought the 7900GS 256MB for $60 plus shipping a long time ago. [...]
    Chynkinese 20 525 Chynkinese
02-22-2008 at 07:57 AM
On [CPUs] Quick question regarding new install
Last matching post:
Why hasn't anyone pointed out to him that using a Windows installation from another computer into a different system is a big mistake? Come [...]
    zhadows 11 296 nforce256
02-22-2008 at 12:37 AM
On [CPUs] Do intell dual and quad core processors support hyper threading??
Last matching post:
The new gaming rig I just built is with the new Intel E8400, the new 45nm chips. Runs amazingly cool. Runs anygame I throw at it with my e [...]
    friggin 24 1033 jimmysmitt​y
02-20-2008 at 11:46 PM
On [CPUs] What is a good 3dmark06 score these days??
Last matching post:
I would think your score would be much higher. I just has one 8800GTS 320MB w/e8400 @ 3.4ghz and I scored 11,545 last time. You have T [...]
4   RyanTheSav 159 8938 inspector7​1
09-14-2008 at 07:51 PM
On [Power Supplies, PC Cases & Case Mods] Weird buzzing sound from PSU.
Last matching post:
I had an Antec PSU, smartpower I believe that did the same thing after a couple months. After doing a little research online, turns out thi [...]
    Dunkel 9 616 bob8701
02-19-2008 at 05:50 PM
On [Power Supplies, PC Cases & Case Mods] Antec Power Supply
Last matching post:
Can't help you with the PSU question. Antec makes quality power supplies in all the years I've bought their PSU's. I've only worked with t [...]
    zplugger 14 474 g-paw
02-22-2008 at 01:38 AM
On [Other Components] Shalom, I need an advice
Last matching post:
salaam, I would recommend you ditch the ATI Radeon 3850. Get the Geforce 8800GT 512MB. It is better than the 3850. This is not just from [...]
    Eliyah 5 335 nforce256
02-14-2008 at 11:53 PM
On [CPUs] New E8400 build help
Last matching post:
I just used a few different programs and they all read 13-15C at idle. Under load, it shoots up to 32C during UT3 and Prime95 pushes it upt [...]
    Dirtdog15 16 947 mngdew
02-10-2008 at 09:59 AM
On [CPUs] New gaming rig.........please critique.
Last matching post:
That's a nice setup. However, you won't be able to max out Crysis. The hardware is just not out there right now to max Crysis. You will b [...]
    lexxone 11 363 Technology​Coordinato​r
02-09-2008 at 03:15 AM
On [CPUs] e2180 or e6750 works well on GigaByte GA-P35-DS3L Motherboard
Last matching post:
Hey I have that same card. There is not a big price difference between it and the 8800GT 512MB. For the love of GOD don't buy the 320MB GT [...]
    jhyukkang 17 985 _visual
04-17-2008 at 10:23 PM
On [CPUs] CPU Pins
Last matching post:
It should be fine as long as the CPU pins are not bent. I would go ahead and try it. I'm pretty sure it will work. Go ahead and try it [...]
    wildben 14 378 teh_boxzor
02-09-2008 at 11:03 AM
On [Power Supplies, PC Cases & Case Mods] Antec Earthwatts 500 PSU fan question.
Last matching post:
Nice PSU btw. My Antec smartpower or whatever was a piece of $hit and had a blown capacitor or something so I got the Earthwatts. Works gr [...]
    Dunkel 7 600 Dunkel
02-06-2008 at 07:29 PM
On [CPUs] newbie question thermal paste
Last matching post:
all the retail boxes come with thermal grease pre-applied to the HSF. You just fix the thing on top of the processor and your good to go. [...]
    redsox 5 314 drew455
01-30-2008 at 02:55 AM
On [CPUs] ~The E8400 preparation thread~
Last matching post:
gamebro, this is awesome news! My p35-DS3L will be here tuesday along with my new E8400 and Smilodon casing. This will be my first build. [...]
2   gamebro 86 5132 ctbaars
03-27-2008 at 09:19 PM

Go to:
Post new message   Click here to post a new poll

  New threads
  New messages in an old thread
  No new messages
  Go to the last read message in a thread you have not participated in
  Go to the last read message in a thread you have participated in
  Go to the last read message in a Bookmarked thread
 

Forum map
MyDiscussions.Net Forum, Version 2007.1
© 2000-2006 No1Dev
Page generated in 0.397 seconds
Google Ads