ouch1 - Overclocking - Tom's Hardware Forums

General Discussions \| CPUs \| AMD \| 3D Chips \| Motherboards \| Chipsets & Bios \| Cooler and Heatsinks
Page : 1 2 Next Previous
	Thread	Last page	Thread starter	Number of Rep. Read	Last post
	[Cooler and Heatsinks] liquid nitrogen and water cooling Last matching post: The OP could always use an aquarium water chiller. Like this one: It is rate up to 1000GpH and has temp controls for down to 40F. I hav [...]			lewbaseball07	38	2109	rubix_1011 11-12-2008 at 04:33 PM
	[Cooler and Heatsinks] Need help with watercooling setup! Last matching post: This would work better for you than the Gigabyte kit: All you will need to buy to cool your northbridge with the above kit is this: And [...]			Priv	2	79	ouch1 10-20-2008 at 05:53 PM
	[Cooler and Heatsinks] will this work for watercooling? Last matching post: I agree with faster on this. I have seen people who built thier own chillers using a combination of a heat exchanger and a large reserviour [...]			cbr900son	4	131	yaoiboimi 09-20-2008 at 10:16 AM
	[Cooler and Heatsinks] 4870x2 Water Block Last matching post: I totally agree with Conumdrum. Good solid copper blocks with high quality machining. I use the 8800GTS block and it lowered my idle gpu [...]			PoorPlay	15	1043	Conumdrum 09-25-2008 at 09:58 PM
	[Cooler and Heatsinks] Watercooling or Aircooling? Last matching post: LOL in that review the GTX and the TDX are usually neck and neck or within 1C of each other. And the TDX is not designed for the QUAD co [...]			Vengeful Penor	19	400	Superhal 09-22-2008 at 09:48 AM
	[Cooler and Heatsinks] Wanting to Switch to Water Cooling Last matching post: First off any tubing will leak over time. But better tubing such as Tygon or Masterkleer will take longer to leak than neoprene (which w [...]			swat565	25	480	rubix_1011 08-21-2008 at 03:24 PM
	[Cooler and Heatsinks] Liquid Cooling Solutions Last matching post: Yeah but the Holley pump does look cool though. -ouch1			abydosone	37	492	rubix_1011 07-03-2008 at 04:56 PM
	[Cooler and Heatsinks] Am I missing any parts for a water cooling system? Last matching post: Well... All the parts are there, but you will get better performance going with a custom built kit. Especially since the Swiftech kit you [...]			xpyrofuryx	8	329	rubix_1011 07-03-2008 at 02:59 PM
	[Cooler and Heatsinks] Cant find a good 9850BE + 2x 3870 water cooling kit -help! Last matching post: Another option is to buy a complete DangerDen DIY kit based on the DD / Laing DDC-12V 18 Watt Version 3.2 pump: A Dd MC-TDX for AM2 Proces [...]			xpyrofuryx	2	214	ouch1 06-25-2008 at 06:54 PM
	[Cooler and Heatsinks] Best Cases for Water Cooling Last matching post: You could always take a look at the Danger Den Water Box Plus: -ouch1			DamoVOTF	15	730	PsyKhiqZero 06-07-2008 at 09:36 AM
	[Cooler and Heatsinks] where can i buy car radiators at good price? Last matching post: Rubix, Most car heater cores and radiators (at least for older cars) are brass. And unlike aluminum do not react with copper in a water c [...]			goohsm	11	267	WestWarrior 05-31-2008 at 12:22 AM
	[Cooler and Heatsinks] Ruptured tube in Swiftech H20-120 Liquid Cooling System Last matching post: First off it is sad to hear about your kit failing. Secondly I always recommend that if you are going to use a kit do some research on it. I [...]			Fiverings	21	552	ouch1 05-27-2008 at 05:45 PM
	[Cooler and Heatsinks] Mineral Oil Submerged PC and Overclocking Last matching post: XTK, Check out this article and you can go from there: One thing I do recomend is going with one of the newer Gigabyte full solid sta [...]			jfkillers	39	2515	ouch1 05-09-2008 at 05:57 PM
	[Cooler and Heatsinks] Exos 2.5 Will it fit on my case / Alternatives... Last matching post: I would recommend modding your case to take the 3rd fan as that will allow for more airflow through the radiator. -ouch1			zoopnfunk	8	582	ouch1 04-12-2008 at 01:24 AM
	[Cooler and Heatsinks] Dealing with dust Last matching post: Another thing to take into consideration is nearby construction, and or traffic from nearby freeways. I know that vehicle exhaust (especiall [...]			lex-luther	14	376	bildo123 04-08-2008 at 04:38 PM
	[Cooler and Heatsinks] whats the best watercooling setup? Last matching post: I recommend and prefer Danderden products because they do not mix Aluminum and copper in thier products unlike Swiftech. Which uses aluminum [...]			papasmurf211	11	647	phreejak 03-30-2008 at 04:49 AM
	[Cooler and Heatsinks] Cheap wcing? Last matching post: Heater cores work fairly well, and since they are usually brass there is less of a problem of corrosion. -ouch1			jaibot18	26	332	jaibot18 03-28-2008 at 11:20 PM
	[Cooler and Heatsinks] Fridge as a chassis cooling system Last matching post: The only question I have is how much did you pay for all of that. I bet it is either very close to, or more than the cost of a VapoChi [...]			xzec	16	551	Evilonigiri 03-07-2008 at 05:05 AM
	[Cooler and Heatsinks] What Coolant liquid does everyone use? Last matching post: I use a 90% Distilled water and 10% G11 (pentosin) mixture in my loop. -ouch1			topher219	26	694	Jango 03-22-2008 at 05:36 PM
	[Cooler and Heatsinks] Best quiet cooling for my old media center pc - athlon xp 2200+ Last matching post: This one should work well for you: -ouch1			virgil_disgr4ce	7	226	basketcase 02-26-2008 at 03:25 PM
	[Cooler and Heatsinks] Ok so I am a noob at wc Last matching post: Hmm I remember that when I setup the MC-TDX on my friends system the instructions said that it would perform the best when accelerator n [...]			gimper48	33	758	ouch1 02-14-2008 at 05:50 PM
	[Cooler and Heatsinks] Q6600 moderate overclocking, water cool or air cool? =D Last matching post: Hmm I installed the Gigabyte 3d Galaxy in my wifes system (I was being lazy), and her CPU is usually within 2-3C of ambient air temps wh [...]			poohball	12	593	Mugz 02-08-2008 at 01:14 PM
	[Cooler and Heatsinks] Thwrmaltake Bigwater Last matching post: I will warn you now that you need to be very careful with the ThermalTake water cooling kits. They have problems with te pump/res cracki [...]			spruane	6	507	phreejak 01-31-2008 at 10:05 PM
	[Cooler and Heatsinks] My system is now Liquid Cooled... Last matching post: Even then you will find that the radiator is way too restrictive. I recommend getting a ThermoChill PA120.2 since they are one of the be [...]			thegermankid	11	498	richardscott 02-01-2008 at 11:18 AM
	[Cooler and Heatsinks] Best Water Cooler 2008 Last matching post: The problem is finding tham in stock. Just about everywhere they are out of stock. That is why I went with the Dd MC-TDX when I built [...]			speed6	38	1554	rubix_1011 10-13-2008 at 05:28 PM
	[Cooler and Heatsinks] Building new system, thinking of WCing.. need feedback Last matching post: I do not recommend Zalman. They are only slightly better than Thermaltake's water cooling kits. If you want to water cool don't do it halfwa [...]			Jeffro	6	330	ouch1 01-29-2008 at 05:58 PM
	[Cooler and Heatsinks] Watercooled - but still high temps Last matching post: ok first off what TIM did you use? And secondly what pump are you using? To me it sounds like there is either not enough coolant flow, or [...]			CypHill	20	453	Mugz 01-23-2008 at 08:31 AM
	[Cooler and Heatsinks] DIY: RAM Heatsink Last matching post: I did something similar a couple years ago. But all I did was cut a P3 slot 1 heatsink in half, and used Intel thermal tape (P4 HSF aluminum [...]			Shadow703793	9	870	Shadow703793 01-11-2008 at 10:03 PM
	[Cooler and Heatsinks] what is the best cpu water block for intell q6600 socket 775? Last matching post: Here you go: I have a friend who has one and it works real well. -ouch1			scorpio58	2	1267	phreejak 01-08-2008 at 06:34 PM
	[Cooler and Heatsinks] Heater core or Specialized radiator for computer? Last matching post: Well I can tell you this: Where the heater core is designed to get heat out of the loop it is still fairly restrictive in how much heat i [...]			RICKPATBROWN	3	380	rubix_1011 07-07-2008 at 09:20 PM
	[Cooler and Heatsinks] Is water cooling worth it? Last matching post: Just remember to not go inexpensive when it comes to water cooling. Get good quality parts (DangerDen, Swiftech, etc) not cheapo parts (ther [...]			RICKPATBROWN	8	359	Hatman 01-05-2008 at 07:32 PM
	[Cooler and Heatsinks] How they did it? Last matching post: LOL if you look closely and read the article carefully they state that they would love to put a 92mm or 120mm fan on the coolers, but could [...]			poup23	7	436	LuxZg 12-29-2007 at 06:23 PM
	[Cooler and Heatsinks] watercooling below ambient Last matching post: You could always to a water bong. Look it up. -ouch1			mimart7	21	565	wildlaurel 11-20-2007 at 09:41 AM
	[Cooler and Heatsinks] Just a question about Water Cooling with QX6700 & sli Ultras Last matching post: Hmm it almost sounds like bad mounting. But I could be wrong. Try removing and reseating the waterblocks (after you clean off the TIM alread [...]			adam884	18	581	phreejak 11-19-2007 at 10:30 PM
	[Cooler and Heatsinks] Essential to replace cooling liquid at regular intervals? Last matching post: You might want to see if you can mod an ehiem 1250 pump to work for you. It will have alot of flow and a 2M pressure head to it. That will w [...]			cfvh600	4	184	ouch1 11-13-2007 at 01:29 AM
	[Cooler and Heatsinks] Maze4 Last matching post: I would recommend asking that question on the Dd forums. Since they would know thier products better than anyone else. -ouch1			gwyn	2	168	gwyn 11-15-2007 at 04:50 PM
	[Cooler and Heatsinks] fast question about vga water block Last matching post: If you want the best possible water cooling block for the 8800GT then here it is: All you need to buy extra is the 14 ram sinks for the [...]			paintballwizzx	5	398	ouch1 11-09-2007 at 06:46 PM
	[Cooler and Heatsinks] Thermaltake LCS - why so bad? Last matching post: Phunky, It applies to pretty much all Tt LCS kits. Try putting a decent OC on your CPU and you will see that the Tt kit cannot hold up un [...]			vibe	7	483	godman 11-04-2007 at 09:57 PM
	[Cooler and Heatsinks] Best water cooled case ever?! Last matching post: That thing again. Don't get me wrong its nice, but I bet that thing gets real dusty inside it. And it has a huge footprint. Plus you are run [...]			kcwa	30	1400	spaztic7 10-26-2007 at 02:11 PM
	[Cooler and Heatsinks] liquid cooling for overclocking and nzxt lexa Last matching post: I am not going to be rude about this bu I can tell you now. Stay away from Tt water cooling. It has serious flaws built into it. Like a seri [...]			nzxtlexa	1	240	ouch1 10-24-2007 at 05:44 PM
	[Cooler and Heatsinks] External watercooling systems Last matching post: The Koolance would probably perform better since it has almost double the airflow compared t othe Zalman. Plus Koolance have been at it alot [...]			Nooblie_One	2	371	Nooblie_one 10-24-2007 at 08:33 PM
	[Cooler and Heatsinks] EVGA/Innovatek 680i Black Pearl Water Blocks Last matching post: Sorry bout that I thought you wanted the one for the video card. But I did find it on Innovatek's webshop: -ouch1			elrodvoss	5	747	elrodvoss 10-06-2007 at 03:53 AM
	[Cooler and Heatsinks] Fridge Last matching post: If you want to go phase change just go buy a Vapochill unit. They are pricey but will cool you cpu to well below freezing. -ouch1			itotallybelieveyou	6	290	ouch1 10-01-2007 at 05:57 PM
	[Cooler and Heatsinks] First time liquid cooling ^^ Last matching post: The screws should be roughly 12.5 to 12.7mm long. But I am not sure. I hope this helps you: -ouch1			movado	32	657	movado 09-29-2007 at 12:46 AM
	[Cooler and Heatsinks] lucky treasures?....or junkyard bound? Last matching post: Nice! Just remember to use water wetter in the coolant in both loops so that the chances of galvanic corrosion are limited. -ouch1			lewbaseball07	5	220	ouch1 09-26-2007 at 11:14 PM
	[Cooler and Heatsinks] Zalman reserator 2 and Q6600 + 8800 gts Last matching post: I seriously doubt it will be able to handle the amount of heat output from both the cpu and GPU. I know you hate fans but I would recommend [...]			mcfly29	1	506	ouch1 09-25-2007 at 10:37 PM
	[Cooler and Heatsinks] Koolance EXOS 2? Last matching post: If you want external go for this bad boy: All you need to buy on top of that are the blocks. -ouch1			SinisterMessiah	2	242	ouch1 09-25-2007 at 10:35 PM
	[Cooler and Heatsinks] I'm Considering Water Cooling. Last matching post: Give it time Mugz. You will get Galvanic Corrosion even with ethylene glycol since it is in fact does not stop corrosion. All is does it del [...]			Rugburn	4	321	ouch1 09-25-2007 at 05:48 PM
	[Cooler and Heatsinks] How do I cool this NORTHBRIDGE!? Last matching post: I think this bad boy might work for you. You just need to figure out if it fits. -ouch1			ss_blake	7	430	badge 09-25-2007 at 04:05 PM
	[Cooler and Heatsinks] Modding a Thermaltake Symphony- Worth it? Last matching post: If you want to go that route just replace all the water cooling equipment with 1/2" stuff since it will cool even better than a 3/8 [...]			snootch	1	245	ouch1 09-24-2007 at 05:34 PM
	[Cooler and Heatsinks] Chasis Fans: Shouldn't Intake = Exhaust ? Last matching post: You are somewhat over thinking the issue here. Usually there it at least 1 80mm exhaust fan on the back of the case along with the fan in th [...]			summer_of_alvin	4	355	little_Scrapper 09-23-2007 at 11:53 PM
	[Cooler and Heatsinks] watercooling w/o reservoir? Last matching post: You can do a closed loop or a "T" line. Just remember that with either option you need to worry more about evaporation than with a [...]			APieceOfCheese	4	242	ouch1 09-12-2007 at 06:01 AM
	[Cooler and Heatsinks] Designing new watercooling setup. Last matching post: Hmmm I wonder if the condensation is caused by your tec's.. Since condensation should only form when something is somewhat cooler than a [...]			kcrush	18	470	phreejak 09-12-2007 at 07:46 PM
	[Cooler and Heatsinks] Watercooling Last matching post: Who says that £200 is not enough for a decent water cooling setup? I think they are dellusional: £171.99 That kit includes the following: [...]			echelon_101	9	283	ouch1 09-10-2007 at 05:35 PM
	[Cooler and Heatsinks] SLI VGA Coolers?!?!? Last matching post: Ummm for 2 8800GTS you might want to look at either two Thermalright hr-03 plus with 92mm fans or go for water cooling. -ouch1			hobojoe58	1	347	ouch1 09-04-2007 at 06:01 PM
	[Cooler and Heatsinks] Freezer 7 Pro cool touch with E4300 at 2.8 GHz Last matching post: go get some arctic silver 5 or ceramique, and get some isopropyl alcohol (at leat 90%) and clean off the old compound and follow the instruc [...]			cs378	4	334	ouch1 09-04-2007 at 05:49 PM
	[Cooler and Heatsinks] New System build running hot, need advice! Last matching post: Well for good thermal paste it is hard to beat Arctic Silver 5 or Arctic Ceramique. As of an easy to install after market heatsink I think y [...]			crudler	5	394	ouch1 09-04-2007 at 05:42 PM
	[Cooler and Heatsinks] Cooling northbridge of an Asus P5K Last matching post: Remove the heatsinks from the chips and clean them off. Then put Arctic Silver Ceramique on the chips and put the heatsinks back on. Also tr [...]			twinpawer	11	669	twinpawer 08-31-2007 at 11:53 AM
	[Cooler and Heatsinks] Chipset Heatsinks ... thermalright hr-05?? Last matching post: I have never used it before but know of people who have used it and they love it. I recommend googling up reviews of it and see what they s [...]			hertzuk	4	287	hertzuk 08-30-2007 at 02:21 AM
	[Cooler and Heatsinks] Water Cooling Noobs Dilemma Last matching post: Actually Phreejak there is another gpu block available. Some people have been using a Maze4 with a custom made hold down and getting tem [...]			xelaseer	5	675	phreejak 08-31-2007 at 02:26 PM
Page : 1 2 Next Previous