|
 |
[CPUs] RMA'ing an Intel Core2 E6600
|
|
|
paq7512 |
3 |
631 |
paq7512 01-11-2008 at 05:40 AM |
|
 |
[CPUs] Opteron Santa Ana or Intel Dual Core 21xx
|
|
|
paq7512 |
3 |
556 |
valdis 10-28-2007 at 09:42 AM |
|
 |
[CPUs] should i wait?
Last matching post:
I would wait.... Your 6000 should be fine and you should see no problems with it.
|
|
|
kommakazi06 |
7 |
171 |
crowheart27us 10-01-2008 at 12:35 PM |
|
 |
[Other Components] Keyboard Problem Virus or Hacker?!
Last matching post:
have you tried this in safemode?
|
|
|
DarkRoy |
33 |
620 |
DarkRoy 09-04-2008 at 09:56 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] i bent a capacitator...but only slight...is it still ok?
Last matching post:
It should be fine as long as the points to the motherboard still have contacts.
|
|
|
john_antonio |
7 |
251 |
physicz 08-11-2008 at 01:18 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Best 600w Power Supply
Last matching post:
Going to add seasonic, silverstone, and fsp.
|
|
|
xech |
10 |
372 |
pcnazz 08-03-2008 at 03:34 AM |
|
 |
[Other Components] Bottleneck?
Last matching post:
I would say no, but I am no pro. Let's see what everyone else has to say.
|
|
|
PhrexianGhoul |
5 |
179 |
PhrexianGhoul 07-15-2008 at 11:12 PM |
|
 |
[CPUs] QX9650 Not showing 3.0GHz (but not speedstep i think)
Last matching post:
run prime95 and cpu-z and it should be 3ghz.
|
|
|
paulcurtis |
6 |
272 |
Vertigon 07-14-2008 at 03:11 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Cheap PSU vs. Expensive PSU?
Last matching post:
Get this psu:
|
|
|
doomsdaydave11 |
40 |
1074 |
4745454b 03-10-2008 at 06:02 AM |
|
 |
[CPUs] CPU Buyers' Guide (updated 10 May 2008)
Last matching post:
Cool stuff, this will help a lot of people. Nice job.
|
2 |
|
turpit |
52 |
17896 |
BraydenW 10-05-2008 at 05:30 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Antec 900 or Raidmax Smilodon Extreme
Last matching post:
Coolermaster 690
|
|
|
andro21 |
30 |
1797 |
mathos 02-24-2008 at 12:40 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] What Psu to get?
Last matching post:
I vote the this the PC Power & Cooling 610W.
|
|
|
Fatality2 |
21 |
438 |
tlmck 01-14-2008 at 08:10 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] ULTRA x3 ANY GOOD-1solid Rail OR multi Rails
Last matching post:
What is your whole system setup? 1000W may be way to much.
|
|
|
waly |
3 |
243 |
waly 01-14-2008 at 03:43 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Best Case for under $120 ?
Last matching post:
I am gonna vote for the Cooler Master 690
I actually like it better them my Antec 900.
|
|
|
ant316 |
26 |
691 |
PhaT 01-17-2008 at 01:19 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] whitch PSU ULTRA X3 or ENERMAX Galaxy
Last matching post:
Listen to mike99, you don't need a 1KW psu.
|
|
|
waly |
17 |
498 |
BobWya 01-12-2008 at 04:56 PM |
|
 |
[CPUs] Intel copied us, says head of AMD
Last matching post:
Hector did make some good points though.
|
6 |
|
thunderman |
279 |
7369 |
dragonsprayer 06-10-2008 at 03:55 AM |
|
 |
[Other Components] OMG i just got a virus PLZ HELP Me!!!
Last matching post:
Backup and clean install and buy a real antivirus program.
|
2 |
|
Maverick7 |
52 |
1225 |
JackNaylorPE 01-02-2008 at 02:39 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Really good prices on PSUs at jr.com, too good?
Last matching post:
The only one that seems good is the Antec. But I heard they fired there oem for some bad batches of caps. So I dunno.
|
|
|
thewalrusking |
5 |
289 |
tlmck 12-28-2007 at 07:41 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] how many PSU watts needed with this specs?
Last matching post:
You could probably even get away with a 400W PSU.
|
|
|
markclaysius |
4 |
547 |
Gravemind123 12-24-2007 at 12:09 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Radeon 3850 - "RECOMMENDED" 450 W ?????
Last matching post:
The raidmax in your case my not suffice. I would recommended getting a decent psu. Here is a 450W for $60
The problem with your psu that yo [...]
|
|
|
Paul22000 |
6 |
934 |
Husky McTarFlash 12-23-2007 at 05:23 AM |
|
 |
[Other Components] Retail or OEM/OpenBox-Important Or Not?
Last matching post:
Yes to oem, no to openbox.
|
|
|
JammerM |
11 |
577 |
woovoong 12-27-2007 at 04:29 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Buying From A Specific Retailer
Last matching post:
I would upgrade to a 500-550w with good rails. And spend the extra money on a better cpu. E4300, E21xx something around there.
|
|
|
Royel91 |
6 |
254 |
Royel91 12-22-2007 at 02:03 AM |
|
 |
[CPUs] will i kill my pc if i stick a C2D in P4 board
Last matching post:
The Core2 would fit but it will not work. However you could get a Pentium D. Since that is supported by the motherboard. But Pentium D's are [...]
|
|
|
50bmg |
37 |
1065 |
50bmg 12-06-2007 at 02:15 AM |
|
 |
[Other Components] Dell Windows Xp reinstall disc
Last matching post:
It only works with Dell OEM's.
|
|
|
snowmanman |
16 |
1063 |
LoneEagle 12-02-2007 at 03:02 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Which PSU to get? (Specific specs inside)
Last matching post:
Get this one for future proof and sli 8800GT video cards
|
|
|
nX07 |
7 |
258 |
AUsch30 11-25-2007 at 03:59 AM |
|
 |
[CPUs] Best A+ Study Guide?
Last matching post:
The Mike Meyers series is good. Those books have a lot of info.
|
|
|
SK711G |
12 |
339 |
junglicious 11-25-2007 at 05:45 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Newegg Black Friday Specials
Last matching post:
Hmm none of this I can use. Hopefully there is something for me.
|
|
|
bobbknight |
5 |
356 |
tlmck 11-24-2007 at 03:34 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Antec 900
Last matching post:
There is no way it will drain the power on your computer. Turning the fans to high only adds about 5-10 watts each.
|
|
|
creepingdeath82 |
5 |
402 |
mimart7 11-22-2007 at 11:04 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] help me choose a case!
Last matching post:
I have both the Antec 900 and the CM 690. Honestly the 900 looks cool, cools good, but it loud. The 690 is less expensive and imo just as go [...]
|
|
|
frozenlead |
22 |
402 |
xringx 11-23-2007 at 08:57 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Help me pick a PSU. Best PSU for under 100?
Last matching post:
|
|
|
Melongod |
14 |
561 |
HammerOfJustice 11-20-2007 at 09:37 PM |
|
 |
[CPUs] Anandtech Phenom review is in
Last matching post:
3d rendering and gaming Intel Kills
|
5 |
|
Epsilon84 |
210 |
6441 |
Thom457 11-29-2007 at 01:59 AM |
|
 |
[CPUs] Abu Dhabi to pay $622 million for a 8.1% stake in AMD
Last matching post:
WHY!! AMD needs money bad :(
|
|
|
fishboi |
25 |
576 |
shargrath 11-16-2007 at 11:10 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] which case can take 2x8800gtx's
Last matching post:
You could also look into the CoolerMaster Stacker 832 or 830 series since you have a lot of money to spend.
|
|
|
labmouse |
13 |
338 |
mimart7 11-11-2007 at 02:44 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] I'm welcoming recommended PSU for my build, plz
Last matching post:
|
|
|
pintail |
11 |
291 |
paq7512 11-09-2007 at 09:02 AM |
|
 |
[CPUs] I must have broke something...
Last matching post:
If it is making one beep you can look on Dell's website under the model of your pc, you may have bent some pins on your processor. :( If it [...]
|
|
|
zompton |
4 |
205 |
zompton 11-03-2007 at 10:54 PM |
|
 |
[Other Components] 8800GT
Last matching post:
Good to know
|
|
|
nickc07 |
11 |
911 |
systemlord 11-08-2007 at 10:19 AM |
|
 |
[CPUs] CPU Bottleneck Question regarding 8800GT
Last matching post:
where have you been for 12 months?
:D
|
|
|
qmalik |
19 |
1561 |
amddiesel 10-30-2007 at 09:36 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] buying psu
Last matching post:
Check out this PSU
|
|
|
jhyukkang |
19 |
406 |
Zorg 10-28-2007 at 02:20 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] CABLE LENGTHS?
Last matching post:
18"
|
|
|
spazticdeath |
4 |
247 |
dragonsprayer 10-26-2007 at 07:26 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] What Gives With Tom's Using a Tier 4 PSU in a Top Gamer??
Last matching post:
That was a great observation.
|
|
|
mlhm5 |
14 |
963 |
mlhm5 10-27-2007 at 05:06 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Enermax Liberty 500W for e6850 + 8800GT???
Last matching post:
I am sure this will be fine unless you have like 5+ hard drives.
|
|
|
wstcoaster07 |
10 |
850 |
lostandwandering 10-25-2007 at 04:21 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Best Power Supply for ~$50? or Recommend Me One
Last matching post:
I agree with anyone who likes the Silencer those psu's are awesome.
|
|
|
qmalik |
35 |
893 |
apache_lives 10-23-2007 at 10:51 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Are Silverstone PSU good?
Last matching post:
Silverstone is no joke of a psu. I have seen many last years. They might be my favorites.
|
|
|
maguszxz |
12 |
569 |
trek6500 10-24-2007 at 10:30 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Hurry! Found great deal on 650watt CoolerMaster. $39.99!!
Last matching post:
I just got a Coolermaster 550 for $30 shipped, and it is for a Unix build. But, the Coolermaster Extreme Power are not as good as the Cooler [...]
|
|
|
lakedude |
23 |
1067 |
nukemaster 10-22-2007 at 07:04 PM |
|
 |
[CPUs] what should I upgrade to... opty, or c2d, or phenom?
Last matching post:
If you are gonna spend some money, get nothing less then a quad.
|
|
|
jaywalker256 |
8 |
479 |
GeOMan 10-21-2007 at 06:52 AM |
|
 |
[CPUs] My 965P-DS3 + E6750 system won' start - Help please.
Last matching post:
This was one of the reasons that i upgraded my ds3, I used to have v1.
|
|
|
Pliko |
6 |
519 |
geofelt 10-21-2007 at 08:47 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] good psu under 35$
Last matching post:
That would work well that fsp. I have used fsp in the past and they are great quality, for not as much money.
|
|
|
jhyukkang |
21 |
642 |
SEALBoy 10-21-2007 at 06:45 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Antec 900 & heatsink clearance
Last matching post:
My Zalman 9500 works and fits fine. I even added a 120mm fan to the side.
|
|
|
El_Hefe |
6 |
486 |
tleonx 10-18-2007 at 07:48 PM |
|
 |
[CPUs] cpu fan made noises when installing?
Last matching post:
Yes it is normal. The noise is from the pins going through the plastic. You must have install the retail heatsink that came with it. As long [...]
|
|
|
mtstans |
4 |
285 |
mtstans 10-07-2007 at 04:19 AM |
|
 |
[CPUs] Biggest Bottleneck
Last matching post:
Your case it definitely the bottleneck.
|
2 |
|
ShortRef |
81 |
3107 |
hell_spawn 10-26-2007 at 10:07 AM |
|
 |
[Other Components] anyone know how to use superold pc?
Last matching post:
I would get more ram for it, and install a Linux OS on it.
|
2 |
|
jhyukkang |
81 |
2433 |
chrispyski 10-05-2007 at 09:11 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] Question about Amps
Last matching post:
As long at your 1kw psu does not blow you should be fine. That is a big psu for that build, unless you are gonna sli, you spent too much.
|
|
|
hastetheday |
9 |
448 |
valis 09-20-2007 at 03:17 PM |
|
 |
[CPUs] Is nobody at least rooting for AMD?
Last matching post:
I know that Intel has now taken the lead with the fastest cpu. But that was never was the case. I have always had Intel cpu's though. But wi [...]
|
5 |
|
kingoftherings |
202 |
7958 |
atomicWAR 11-06-2007 at 08:04 PM |
|
 |
[CPUs] Pentium 4 3.0 GHz getting to 75-80C
Last matching post:
Wow, that is super high. I have seen P4 3.0ghz be like 70, never ran prime this may be right. But it is scary. They are rated to handle high [...]
|
|
|
nerdcorerocks |
15 |
619 |
nukemaster 09-18-2007 at 08:09 PM |
|
 |
[Other Components] Sharp 32" 1080p LCD as a computer monitor
Last matching post:
Plasma's are actually better in higher resolutions. But yes they can burn in and are not good with high elevation climate either.
|
|
|
miahallen |
46 |
6272 |
05-26-2008 at 08:20 AM |
|
 |
[Power Supplies, PC Cases & Case Mods] What power supply should I be getting for this PC?
Last matching post:
That is an awesome graphics card, I was gonna get that one too. I love XFX. I would suggest this psu
It is $100 from buy.com, and $140 on n [...]
|
|
|
Alicia68 |
36 |
1375 |
Zorg 09-12-2007 at 09:55 AM |
|
 |
[CPUs] How do I install a Q6600?
Last matching post:
If you bought a retail in the box Q6600 then there should be a heatsink in the box. What you have to do is pick up the metal levler and inse [...]
|
|
|
googleads |
26 |
2601 |
thedaily10 09-03-2007 at 08:05 PM |
|
 |
[CPUs] System temps
Last matching post:
Speedfan is what a lot of people use or you could go into the BIOS sometimes and check temps there.
|
|
|
rootjd |
5 |
282 |
Tbull 09-02-2007 at 12:03 PM |
|
 |
[Power Supplies, PC Cases & Case Mods] Silverstone, Corsair or OCZ?
Last matching post:
I should have said the specs showed three 12 volt rails with 18AMPS on each one.
|
|
|
Noya |
22 |
660 |
zenmaster 08-31-2007 at 03:55 AM |
|
 |
[CPUs] Just built my first PC..How do I know CPU temps are o.k...
Last matching post:
Those temps do not look normal. With a room temp like that. Hopefully all sensors are working properly. I would run prime95 and see what hap [...]
|
|
|
chadsxe |
23 |
806 |
dobby 09-03-2007 at 12:19 AM |

New threads

New messages in an old thread

No new messages

Go to the last read message in a thread you have not participated in

Go to the last read message in a thread you have participated in

Go to the last read message in a Bookmarked thread