Ad
Latest Reviews & Articles
The Hardware Behind Overdrive

The Hardware Behind Overdrive

Published on November 18, 2008

Our worldwide overclocking championship has begun and we wanted to introduce you to the everyday components our teams will be tweaking to supersonic speeds in a bid for a shot at $5,000. Read more

Synology's DS408 Reviewed: Fast NAS For Pros

Synology's DS408 Reviewed: Fast NAS For Pros

Published on November 18, 2008

Does a NAS device with high data transfer rate and a Web interface that is easy to configure actually exist? Synology shows how it should be done. But the enclosure is not without its faults, either. Read more

How To: Get A 4 GHz Dual-Core For $120

How To: Get A 4 GHz Dual-Core For $120

Published on November 17, 2008

Intel’s 45 nm Core 2 serious is known to boast substantial overclocking margins, and the entry-level E7200 with 3 MB L2 cache costs less than $120. We'll show you how to get close to 4 GHz from this little gem. Read more

Team USA Emerges In Round One of Overdrive

Team USA Emerges In Round One of Overdrive

Published on November 17, 2008

After a long weekend of intense benchmarking with nearly 1,300 liters of liquid nitrogen, one team emerged victorious. They’re on their way to Paris to represent the United States against four other international teams. Show them some support! Read more

All the Reviews & Articles
  

Tom's Hardware Forums

»

CPU & Components

 

CPU & Components

Post new message   Click here to post a new poll
The search engine found results in the following sections :


CPUs | Power Supplies, PC Cases & Case Mods | Sound Cards | Network Interface Cards | Other Components
        Thread Last page Thread starter Number of
Rep. Read
Last post
On [Other Components] Flexible fan for chipset/memory     sciggy 4 189 sciggy
06-02-2008 at 05:52 AM
On [Power Supplies, PC Cases & Case Mods] Average thickness of CPU + MOBO (heatsink clearance issue)     Sciggy 2 174 Andrius
05-14-2008 at 11:55 PM
On [CPUs] QX9650 $799 at Fry's!!     Sciggy 7 276 halcyon
05-13-2008 at 12:16 AM
On [CPUs] For those that care, Q9450 instock at Microcenter     Sciggy 0 118 Sciggy
05-10-2008 at 07:44 PM
On [CPUs] Nehalem support of DDR2 or DDR3?     sciggy 9 350 snarfies1
05-02-2008 at 06:34 PM
On [Power Supplies, PC Cases & Case Mods] which psu?
Last matching post:
Corsair 650tx for $72 after rebate
    0mg_1ts_m3 6 169 invisik
11-06-2008 at 12:55 PM
On [Power Supplies, PC Cases & Case Mods] NZXT has abysmal customer service.
Last matching post:
Out of the 5 of so mail in rebates i had when I bought my new system, their rebate is the only one that I didn't receive (going on 4 almost [...]
    jodrummers​h 2 218 Asian Ping​Pong
10-17-2008 at 10:38 PM
On [CPUs] 3DMark06 Score
Last matching post:
Wait until tonight to find out instead of speculating? Who knows what its going to be! Every setup is different, depends on background pr [...]
    metalweeni​s 22 363 metalweeni​s
09-25-2008 at 10:52 PM
On [Power Supplies, PC Cases & Case Mods] PCP & Cooling 610 W vs CORSAIR TX650 vs ZM600-HP 600Watt
Last matching post:
Based off the PSU ranking chart, #1 PCP&C 610 Silencer #2 tie Zalman/Corsair
    heydudeo 9 413 heydudeo
09-04-2008 at 11:42 AM
On [Power Supplies, PC Cases & Case Mods] is there any truth to this????
Last matching post:
Another key thing to look at is the 12v amperage. Sometimes these PSUs have 4 12v rails and they dont add up the amperage. Depending on GPU [...]
    jonj320 17 359 dirtmounta​in
08-20-2008 at 04:49 PM
On [Power Supplies, PC Cases & Case Mods] Antec True 1000w, or Toughpower?
Last matching post:
What adapter are you talking about? I've heard this mentioned before but never was able to find anything that made sense to use 2 power [...]
    yaoiboimi 15 326 mike99
08-29-2008 at 11:40 PM
On [Power Supplies, PC Cases & Case Mods] Oh the PSU
Last matching post:
Dual PSU connector?
    urahozer 15 261 urahozer
08-06-2008 at 07:06 PM
On [Power Supplies, PC Cases & Case Mods] Suitable PSU, for sli pc
Last matching post:
I don't think that PSU will be adequate. BFG website says that minimum 425 watt PSU with 28A on 12v rail is required for a single card. You [...]
    pazuzu213 6 216 pazuzu213
07-06-2008 at 03:50 PM
On [Power Supplies, PC Cases & Case Mods] Does my intake / exhaust look fine?
Last matching post:
Just make sure you have a really high cfm fan for the rear exhaust. With that much intake, you need alot of pull on that to get good ventila [...]
    gadgetnerd 1 162 sciggy
06-28-2008 at 07:19 PM
On [CPUs] Q6600 or Q9550?
Last matching post:
Microcenter has the Q9450 for $299 on a regular basis. For $100 more I'd say its worth the extra performance clock for clock vs the Q6600. A [...]
    count_diss​ident 17 1180 count_diss​ident
06-30-2008 at 12:20 AM
On [Other Components] Readyboost service wont start (no Readyboost tab)
Last matching post:
Does readyboost really help that much?
    Brett 4 479 CWO4DEV
08-09-2008 at 06:49 AM
On [CPUs] Looking for an AMD FX-55
Last matching post:
I just upgraded from a s939 x2 4800+ on an nforce 4 DFI lanparty. No bios flash was required for me out of the box. Thing ran like a champ, [...]
    stan1415 35 614 jjokubausk​as
08-20-2008 at 08:12 AM
On [Power Supplies, PC Cases & Case Mods] Is the Silencer 750W Quad ATX?
Last matching post:
Straight from the spec page "Main Connector 20+4Pin " thats what attachesto your mobo 24pin power connector. And size it will f [...]
    fawconpunc​h 3 150 strangestr​anger
06-24-2008 at 09:46 PM
On [Power Supplies, PC Cases & Case Mods] What case? Looking for a new case ...
Last matching post:
I have the apollo and i like it. Easy to install, plenty of space. Mostly toolless installs. all around good case.
    Papewaio 10 378 aux
07-03-2008 at 06:21 PM
On [Power Supplies, PC Cases & Case Mods] Using a 20+4 Pin connector in 24 pin connecter Motherboard
Last matching post:
Not to sound like I'm not trying to help, but 20+4 = 24 so you are fine. As stated above, it just means that you can use it with a wider var [...]
    CaptainKic​kAss 3 341 mogwilson
06-20-2008 at 07:55 PM
On [Other Components] how do you guys like firefox 3>?
Last matching post:
ahhh much better now :) thanks
    Maverick7 42 1012 batkerson
06-19-2008 at 04:28 PM
On [Other Components] help asap!!!!! with hole saw bit
Last matching post:
You might have a slight problem. 120mm = 12cm. 2.5cm = 1 inch 12/2.5 = 4.8inches. A 5 inch hole saw will be too big, a 4 inch would probably [...]
    starchbrot​her1 4 206 sciggy
06-14-2008 at 01:25 AM
On [CPUs] Overclocking question. (e8400)
Last matching post:
Important to check is the ratio your ram is running in. Ideally you want to run a 1:1 ratio. If you don't set it like that and you begin to [...]
    DarkDiscip​le 4 272 WiseCracke​r
06-08-2008 at 04:28 PM
On [CPUs] What Proc to overclock
Last matching post:
Generally you can get a good OC on those chips with a good mobo. Generally the mobos that come with pre-built computers are garbage. I would [...]
    thently 11 397 thently
06-25-2008 at 05:17 PM
On [CPUs] Which set is more futureproof and cost effective?
Last matching post:
Set two would be a better choice for a couple of different reasons. 1) Even though your mobo with a AM2+ would (probably) support new AM3 [...]
    Jasumi 5 212 spuddyt
05-24-2008 at 12:41 PM
On [Power Supplies, PC Cases & Case Mods] PSU Danger questions...
Last matching post:
Good power supply right now for a great price is the PC Power & Cooling Silencer 610 Its $104.99 with a $15 mail in and free shipping. [...]
    Silhorn 17 388 jsc
05-22-2008 at 11:29 PM
On [CPUs] Best intel based Gaming cpu for under $200?
Last matching post:
E8400 $194 at Though since you have an AMD mobo and you want best bang for your buck, you'd probably be better off with a faster AMD cpu [...]
    Kenai28 11 809 mimart7
05-20-2008 at 03:26 PM
On [CPUs] E8600 + 9900 GTX + 780i board what ya think?
Last matching post:
I would stay away from the quads(and the 45nm for that matter) until they clear up the temp sensor problems. Seems to be most common in the [...]
    soldier37 19 1349 LukeBird
05-15-2008 at 02:03 PM
On [CPUs] help me with FSB
Last matching post:
FSB stands for Front Side Bus. Check out this link to read up on what it does pretty much it is the "connection" between the CPU [...]
    ojomow 5 162 Andrius
05-13-2008 at 01:01 AM
On [CPUs] Q9450
Last matching post:
Microcenter says shipping is 1-3 days right now. Also Frys seems to have them instock in local stores, but not online. Might be worth a phon [...]
2   Dark Comet 51 1012 Dark Comet
05-13-2008 at 11:24 PM
On [CPUs] Nehalem: The End Of Mainstream Overclocking?!
Last matching post:
Its funny that you are all complaining about this "locked" cpu. 2 things to be said about this. 1) Look at the source, everythi [...]
2   dattimr 76 1235 amdfangirl
05-12-2008 at 02:35 PM
On [CPUs] Q9450 availability???
Last matching post:
Fry's seems to have a decent stock of them. I stopped by my local store on Monday and they had 5 retail boxes instock, 0 oem though. They ha [...]
    scenariol1​13 15 705 Crazy-PC
05-08-2008 at 06:27 PM
On [Power Supplies, PC Cases & Case Mods] Picking a power supply
Last matching post:
I know this thread isn't to critique your build, but why the 8500? Get the 8400 for ~$80 less and just do a minor OC to 3.16ghz. And also, 3 [...]
    Merdox 9 352 athauglas
05-08-2008 at 04:31 PM
On [CPUs] Quad vs Dual Gaming
Last matching post:
So essentially, 1066 is the same as 800 just that it is already clocked higher? What is a C4 module?
    kazar123 20 662 grieve
05-09-2008 at 05:39 PM
On [CPUs] Intel chip availability (retail)?
Last matching post:
seems most places have their expected availability for April 28th
    angus1000 5 320 tjoepie
04-25-2008 at 05:09 PM
On [CPUs] Intel Dual-Core processor E2200 (2.2GHz) / E8400
Last matching post:
Check your motherboard's compatibility list. Sometimes it will take a BIOS update to make the new 45nm processors work. Sometimes they wont [...]
    jamepc 6 679 jamepc
04-24-2008 at 05:30 AM
On [CPUs] q6700 price drops
Last matching post:
For what its worth, microcenter has the Q6600 for $199
    lukasdesig​n 17 731 Sciggy
04-23-2008 at 12:23 AM

Go to:
Post new message   Click here to post a new poll

  New threads
  New messages in an old thread
  No new messages
  Go to the last read message in a thread you have not participated in
  Go to the last read message in a thread you have participated in
  Go to the last read message in a Bookmarked thread
 

Forum map
MyDiscussions.Net Forum, Version 2007.1
© 2000-2006 No1Dev
Page generated in 0.433 seconds
Google Ads