Deepcool Rolls Out New GAMMAXX S40 Cooler

News
By Jane McEntegart
published

Another cooler joins the GAMMAXX family.

Deepcool has announced a brand new addition to its line of CPU coolers, the GAMMAXX S40. In this instance, the S is supposed to represent the small or compact nature of the cooler, though Deepcool promises there's no tradeoff in cooling performance.

 

The S40 boasts the same bowl-shaped 120mm fan we saw in the GAMMAXX 300. It runs between 900 and 1600RPM and achieves a maximum airflow of 55.5CFM at 21dBA. The heatsink body is fully nickle-plated for durability and to prevent oxidation and Deepcool says the four heatpipes touch the processor directly in order to quickly transfer heat to the fins. The fins themselves feature a unique design that Deepcool refers to as 'holes-on-fins.' The idea is that this allows the cooler to push hot air out of the heatsink at a faster rate.

With support for support Intel LGA2011 and AMD FM2, FM1, Deepcool didn't mention anything on pricing or availability but we'll keep you posted.

Contact Us for News Tips, Corrections and Feedback               

Jane McEntegart
11 Comments Comment from the forums
  • A Bad Day
    Curious to see how they sanded the bottom part of the heatsink that comes in contact with the CPU. I've seen one air cooler that looked like it was sanded with a P12 grit sandpaper.
    Reply
  • eklipz330
    FINALLY a cooler that uses that extra space on top of the heat plate as a heatsink. looks like deepcool read my comment all those years ago. this will perform very well.

    now all they need to do is have textured fins to increase surface area, angle them slightly into eachother like this > to increase the air resistance/increase thermal conductivity, and include a fan with high static pressure. also, the heatpipes should not be adjacent, but far apart when touching the heatsink fins to help with the thermal dissipation. all that needs to be done to have an excellent cooler.
    Reply
  • Pennanen
    eklipz330FINALLY a cooler that uses that extra space on top of the heat plate as a heatsink. looks like deepcool read my comment all those years ago. this will perform very well.now all they need to do is have textured fins to increase surface area, angle them slightly into eachother like this > to increase the air resistance/increase thermal conductivity, and include a fan with high static pressure. also, the heatpipes should not be adjacent, but far apart when touching the heatsink fins to help with the thermal dissipation. all that needs to be done to have an excellent cooler.Some old scythe heatsinks had that little heatsink on top of plate for years.
    Reply
  • merikafyeah
    People need to stop referring to "static pressure" as the basis for fan selection. It's "total pressure" that is important, not static pressure:

    http://www.scribd.com/doc/61806478/The-Myth-About-Fan-Static-Pressure
    (Due to someone's infinite wisdom, the source graphs have been irreparably downsized such that they are essentially useless. Fortunately, someone posted a synopsis with some of the original graphs and charts intact, which you can find here: http://mysite.verizon.net/restkgfn/airpolcontrol/id24.html

    I just wish some kind soul would repost the original paper with all the graphs intact.
    Reply
  • merikafyeah
    PennanenSome old scythe heatsinks had that little heatsink on top of plate for years.Cooler Master's GeminII S524 is the only cooler I know of that actually fuses the top-plate with the heatsink:
    http://www.coolermaster-usa.com/product.php?product_id=3050

    The cooler does not perform spectacularly due to a relatively weak stock fan. It really needs a high-pressure 38mm fan. It also has support for 140mm fans but there aren't many high-pressure 140mm fans around.
    The absolute ideal fan for this cooler would be a Sanyo Denki 9LB1412M501. But those are impossible to find, especially individually:
    http://db.sanyodenki.co.jp/product_db_e/coolingfan/dcfan/dc_fan_detail.php?master_id=2117
    Reply
  • Pennanen
    merikafyeahCooler Master's GeminII S524 is the only cooler I know of that actually fuses the top-plate with the heatsink:http://www.coolermaster-usa.com/pr ct_id=3050The cooler does not perform spectacularly due to a relatively weak stock fan. It really needs a high-pressure 38mm fan. It also has support for 140mm fans but there aren't many high-pressure 140mm fans around.The absolute ideal fan for this cooler would be a Sanyo Denki 9LB1412M501. But those are impossible to find, especially individually:http://db.sanyodenki.co.jp/product er_id=2117Scythe mugen also has that small heatsink on top
    Reply
  • sanilmahambre
    Deepcool is the cheapest cooler manufacturer out there. They provide us with nice cool working coolers and Fan controllers at a very handsome price tag.

    I am guessing this GAMMAXX S40 Cooler would be about 3.5-4 K Indian Rupee.
    Reply
  • anonymous_user
    merikafyeahCooler Master's GeminII S524 is the only cooler I know of that actually fuses the top-plate with the heatsink:http://www.coolermaster-usa.com/pr ct_id=3050There is also this Noctua:

    http://www.noctua.at/main.php?show=productview&products_id=35&lng=en

    And if you consider older discontinued heatsinks, there are Thermalright's XP-90 and XP-120.
    Reply
  • clintwilks
    this company has done pretty well i've used their coolers when i was on amd vishera cpu and the ice warrior kicked the tt frio's arse for 10 or 20 bucks less...and they look neat too :)
    Reply
  • f-14
    replace the 120mm fan with a 140mm so you've got something that takes heat right off the pipes in the more imporant areas suck as the bottom and edges where the pipes are transferring the heat and it will cool alot better more quickly and throw in another 140mm fan for a push pull configuration and drop a few more degrees beyond the single 140 i bet.
    Reply