Corsair's Commander Mini Can Boss All Your Fans Around
Corsair's Commander Mini can function as a central hub for all your fans and Corsair Link compatible devices.
Corsair's Link system is a combination of hardware and software that can be used to control a number of Corsair products in your case. These products include your Corsair closed-loop liquid cooler and your Corsair power supply, but no more -- until now. Corsair is introducing the Commander Mini, which is a central hub for your Corsair Link-compatible devices and a fan controller.
The Commander Mini can feed up to six individual 4-pin fan channels along with four Corsair Link devices. It also has support for RGB LEDs, as well as four thermal sensors.
The Commander Mini can push up to 12 W per fan channel, along with up to 24 W per RGB LED channel, with a combined total of 48 W. This might not be as much power as having more analog fan controllers, but so long as you don't hook up too many fans, it won't be a problem. The unit is powered by a single SATA power connector and can be plugged into an internal USB header. You'll be able to mount the device behind most motherboard trays thanks to its slim design.
If you don't want to control your fans and water coolers through the BIOS, a solution like this might be interesting. It will allow you to control all your fans, pumps and LEDs from within a single software interface on your desktop, which admittedly is quite nifty.
The unit is available immediately from Corsair, and should be arriving at retailers soon. Pricing is set at $59.99.
Follow Niels Broekhuijsen @NBroekhuijsen. Follow us @tomshardware, on Facebook and on Google+.
· Programmable four channel fan controller - have that on MoBo
· USB 2.0 and aquabus interface - For ?
· Four fan outputs with current measurement - have that on MoBo, not sure what I'd do w/ current numbers
· Eight temperature sensor inputs - Have 3 on MoBo, 6 on Six Eyes
· Flow sensor input - Use visual ... like being able to see it which I wouldn't have w/ door front case closed.
· Output for IR transmitter - Not sure what I'd do w/ that
· Three LED outputs - Have 6 in case.
· Potential-free switch - For ?
· Two additional power outputs - For ?
· Extensive alarm options - Have 6 alarms on Six Eyes
· Acoustical alarm - As above
· Speed signal output for status evaluation - Have that