In Win takes the opposite approach compared to Azza by starting off with high-cost materials, and then charging a high overall price of $800. Rarity pushes this one to $1000 at a single vendor, with no other sources selling the chassis at its recommended price.
Most of the exterior panels are mirror-tinted glass, and each glass panel is attached over a silicon spacer to a sturdy aluminum frame.

The front panel features an open 5.25” bay at the bottom. Two USB ports, headphone and microphone jacks, a power button, and a recessed reset button reside in an aluminum panel above that bay. Higher still, touch-sensitive fan and lighting controls are placed upon front-panel glass.

The mirrored glass is always translucent, and the mirror-like appearance is most apparent when reflecting light-colored backgrounds. Darker backgrounds make it easier to see through the case, and enabling internal lighting completely cancels out the mirror effect.

Two rear-mounted glass panels hide cable connectors. The Tòu features cable passage through a slot between the panels, as well as a space beneath the smaller bottom-rear cover.

The Tòu installation kit also includes two glass-grabbing suction balls, in addition to mount hardware, cable loops, and spare panel hardware.
- What Does It Take For A Case To Be Elite?
- Azza Genesis 9000
- Inside The Genesis 9000
- Building With The Genesis 9000
- In Win Tòu
- Inside The Tòu
- Building With The Tòu
- Rosewill Blackhawk Ultra
- Inside The Blackhawk Ultra
- Building With The Blackhawk Ultra
- SilverStone Fortress FT04
- Inside The Fortress FT04
- Building With The Fortress FT04
- How We Test Our Four Elite Cases
- Heat, Noise, And Heat Vs. Noise
- Which Case Is Elite?
**go to heat and noise page and then the last page from the first page**
I really don't have the inclination to read each - and - every - page in this article based on a piece of rubbish idea. Really Tom's, what on earth possessed you to do thi...**sees the picture of the In Win Tou**
Hmmm...
**reads to the In Win Tou pages**
Wow. Ok, that case is quite the looker. Gee, that construction kinda justifies the stratospheric pricing. What a beautiful case! With some nice watercooling this case will be quiet AND cool AND cool-looking! I agree with you that this is the most elite, erm, showboat-iest case of these four!
Thanks for making your readers aware of products that they would've otherwise missed Tom's! :-)
**go to heat and noise page and then the last page from the first page**
I really don't have the inclination to read each - and - every - page in this article based on a piece of rubbish idea. Really Tom's, what on earth possessed you to do thi...**sees the picture of the In Win Tou**
Hmmm...
**reads to the In Win Tou pages**
Wow. Ok, that case is quite the looker. Gee, that construction kinda justifies the stratospheric pricing. What a beautiful case! With some nice watercooling this case will be quiet AND cool AND cool-looking! I agree with you that this is the most elite, erm, showboat-iest case of these four!
Thanks for making your readers aware of products that they would've otherwise missed Tom's! :-)
http://www.forbes.com/pictures/fkim45flf/1-dark-blade-2/
20 of the most elite
What size radiators can be fit into these cases?
With all due respect, there's a whole lot more regarding a case review, than has been covered.
However, they have almost zero bling, so I guess they might not fit this series. For me though, they're the cases I want to own right now. I don't do much showing off of my computers.
The NZXT Phantom 630 (aside from some of the angles), in my opinion, is the most practical case I've had the pleasure of working with to this point. The innards and internal case design just make sense.
'Elite' definitely doesn't mean practical.
A bit of advice ... don't feed the trolls !!
Don't bother responding to the idiots with the stupid questions, and if they follow up with more tripe then let the mods clean up for you.
You will get all worked up and then we have to come around with a bottle of Jacks and sedate you ...
A bit of advice ... don't feed the trolls !!
Don't bother responding to the idiots with the stupid questions, and if they follow up with more tripe then let the mods clean up for you.
You will get all worked up and then we have to come around with a bottle of Jacks and sedate you ...
I used to mine in the Elitist Jerks pool, until I figured out that I was too good for them...
I was scratching my head over what to call the front fan on the Win case as well ... almost like it was an afterthought.
Can't wait to see part II.
Back in the day the V1000 ... V6000 Thermaltake cases were pretty good ... huge great honking things. The 1000's were steel ... mine could have taken a 7.62 round and kept going. Reminded me of my Combi Van ... had fans everywhere. Heavy. I took to it with a bosche nibbler and improved it no end in terms of airflow.
I was wondering if they refused to participate?