Sign in with
Sign up | Sign in

Assembling The Final Product, Continued

Homegrown Mod Manifesto: How To Build A UV PC
By

Now we install the power supply into the case and start experimenting with different ways to route these cables within the case. Don't be afraid to experiment with different ways to route the cables. Using a variety of methods to take advantage of different aspects of the case it is possible to achieve many different effects within the case. In our situation, we wanted the UV reactive parts to be visible, so we factored that into our design. In the end, we opted for a single channel design down the case using tie wraps that are also UV reactive to achieve a uniform look.

The power supply is now installed and we can start running the cables in the case.

As you can see, when compared to the picture above, we continue to tweak the look of the cables as we move forward. Each movement of the cables or tie wraps that we add changes the overall effect and look of the cabling.
Ask a Category Expert

Create a new thread in the Reviews comments forum about this subject

Example: Notebook, Android, SSD hard drive

There are 0 comments.
This thread is closed for comments