Shootout at the Core 2 Corral: Seven P965 Motherboards Compared

Foxconn P9657AA-8KS2H: Serious Business

Long a supplier of sockets and connectors to its current competition, we're not exactly certain how Foxconn's corporate customers reacted when the company decided to launch its own retail brand a few years ago. One thing has become clear, however: Foxconn means serious business.

Feature Overview

Size is the first thing that sets Foxconn's P9657AA-8KS2H apart from other low cost boards. Based on the same printed circuit board (PCB) as its upscale 8EKRS2H sibling, the increased area gave Foxconn more room to prioritize component placement.

The first board in this comparison to use Intel's most basic ICH8 chipset, two Serial ATA ports are clearly missing from the lower-priced part, yielding a total of four rather than six. Foxconn also eschews lackadaisical IDE and floppy connector placement, putting both on the top half of the board for easy cable management.

Rather than crowd the DIMM slots with a PCI Express x16 graphics card as Biostar did, Foxconn put its x1 slot there. (PCI Express x1 cards are usually short enough to avoid reaching the DIMM slots.) But rather than offer the best of both worlds, Foxconn moved the x1 and x16 slots down one board position, eliminating the advantage found in Biostar's design. Builders with hot or thick graphics cards still get one useable x4 and two usable PCI slots in this configuration, which is adequate for most applications.

While the board is exceptionally well-arranged for its target market, there are three things that still bother us. First is an 8-pin ATX12V connector that's uncomfortably close to the CPU socket when used with large CPU coolers. Second, the Front Panel Audio header might be hard to reach because of its rear corner location. Finally, the PCI Express slot latch is nearly always impossible to grasp from under the graphics card's cooler.

Swipe to scroll horizontally
Foxconn P9657AA-8KS2H
NorthbridgeIntel P965
SouthbridgeIntel ICH8 (82801HB)
Voltage Regulator3 Phases
BIOSP25 (08/04/06)
Clock GeneratorICS9LPRS511CGLF
266.6 MHz (FSB1066)266.2 MHz (-0.17%)
Connectors and Interfaces
onboard1x PCIe x161x PCIe x41x PCIe x13x PCI6x USB 2.01x Floppy1x IDE4x SATA 3.0Gb/s1x Front Panel Audio1x Infrared2x Fan 4 pins (CPU)1x Fan 3 pins (System)
IO panel2x PS2 (keyboard + mouse)1x Serial Port1x Parallel Port1x Network4x USB 2.01x eSATA1x Digital Audio Out (optical)1x 7.1 Channel Audio, Mic/Line-In (5 jacks)
Mass Storage Controllers
ICH84x SATA
JMicron JMB3611x IDE (ATA133/100/66)1x eSATA
Network
Marvell 88E8056 PCIe1x 1 Gbit/s LAN
Audio
Realtek ALC883 7.1AC97 or High Definition Audio

The rear panel ports offer the best of both old and new, including an eSATA port and a digital optical S/P-DIF connection. One analog port is lost, but enough remain to service a 7.1-channel audio system and either a line-in device or microphone.

Thomas Soderstrom
Thomas Soderstrom is a Senior Staff Editor at Tom's Hardware US. He tests and reviews cases, cooling, memory and motherboards.