Sign in with
Sign up | Sign in

DTX Lives! Four Double-Slot Cases For ITX Gaming Machines

DTX Lives! Four Double-Slot Cases For ITX Gaming Machines
By

The ITX form factor is great for space-saving portability. But gamers still need that extra expansion slot to support a high-end graphics card. We compare four compact cases that support double-slot cards on a tiny single-slot motherboard.

Enthusiasts love the ability to choose their own hardware. Yet, the portability advantages Shuttle introduced in its early cube-shaped PCs drove many of them to build upon “proprietary” base systems.

The other side of space savings was similarly-handled by VIA, its mini-ITX products offering an even smaller “standardized” form factor for media-oriented PCs that were the antithesis of performance and value. Value champion AMD stepped in four years ago to fill the gap with a standardized form factor for Shuttle-style cubes. Its DTX initiative specified two-slot motherboards that fit half-way between ITX and Flex-ATX, all while using the same mounting screw locations.

Like many of AMD’s initiatives, its DTX announcements fell upon seemingly deaf ears in the mass market, and the few case manufacturers who paid attention quickly discovered that few of their customers ever knew what DTX was (to be fair, Intel similarly stumbled on its own BTX initiative, which was conceptualized to deal with the out-of-control thermal issues encountered by its Pentium 4). These cases were quickly relabeled ITX. After that, they sold in fairly large numbers. Fortunately, these cases have not gone away.

The reason we use the word fortunately is that these cases can fit a double-slot graphics card on available ITX motherboards. With LGA 1155 processors up to the Core i7-2600K now supported, ITX is finally able to fill the performance role of a truly high-end portable gaming machine.

  Cubitek
Mini-Tank
Lian-Li
PC-Q08
SilverStone
SST-SG07B-W
SilverStone
SST-SG06B
Dimensions
Height13.3"11.2"7.5"7.1"
Width10.4"9.0"9.0"8.7"
Depth15.9"14.0"14.3"11.7"
Card Length13.5"12.0"12.0"9.8"
Cooler Height6.5"4.5"4.8"3.3"
PSU Depth7.5"7.0"5.6"4.0"
PSU
Form Factor
PS/2PS/2PS/2SFX
Space Above Motherboard7.0"1.2"4.8"3.5"
Weight10.1 Pounds6.8 Pounds11.5 Pounds7.8 Pounds
Cooling
Front Fans
(alternatives)
1 x 140 mm
(stock only)
1 x 140 mm
(stock only)
None
(stock only)
1 x 120 mm
(stock only)
Rear Fans
(alternatives)
1 x 120 mm
(stock only)
None
(stock only)
None
(stock only)
None
(stock only)
Top Fans
(alternatives)
1 x 140 mm
(stock only)
1 x 120 mm
(stock only)
1 x 180 mm
(stock only)
None
(stock only)
Side Fans
(alternatives)
None
(stock only)
None
(stock only)
None
(stock only)
None
(stock only)
Drive Bays
Optical Drive2 x 5.25"1 x 5.25"1 x Slim1 x Slim
3.5" External1 x AdapterNoneNoneNone
3.5" Internal1 x 4-bay Cage1 x 4-bay Cage
1 x 2-bay Cage
OneOne
2.5" InternalFourOneTwoOne
PriceUnknown$110 $220 $120


Not shown in the above chart is the fact that SilverStone’s SG07B includes a quality 600 W power supply. The SG06B also includes a power supply, but its 300 W unit isn’t designed to support the high-end gaming hardware we plan to stuff within its otherwise-capable shell.

Ask a Category Expert

Create a new thread in the Reviews comments forum about this subject

Example: Notebook, Android, SSD hard drive

Display all 61 comments.
This thread is closed for comments
  • -4 Hide
    iam2thecrowe , March 16, 2011 5:35 AM
    the silverstone sg06b is the only one that looks any good (not great though). the rest are just plain ugly.
  • 0 Hide
    Darkerson , March 16, 2011 5:39 AM
    iam2thecrowethe silverstone sg06b is the only one that looks any good (not great though). the rest are just plain ugly.

    Opinion = Fact?

    Anyway, I actually like Cubitek's case. Sure, it looks like it would be a pain to make changes to when doing upgrades or whatnot, but nothing is perfect. If it had a handle on top or something, Id probably use it for LAN parties and the such.
  • 1 Hide
    hmp_goose , March 16, 2011 6:17 AM
    Pst: Guys! Ya' flip the plexglass vent on the SG07! http://www.maximumpc.com/article/how-tos/how_build_ultimate_small-form-factor_gaming_pc?page=0,1
  • 0 Hide
    Crashman , March 16, 2011 6:36 AM
    hmp_goosePst: Guys! Ya' flip the plexglass vent on the SG07! http://www.maximumpc.com/article/h [...] c?page=0,1
    Thanks! But if you're building a new system...better still, use a single-fan GPU cooler and the foam air guide! Imagine this beast with a GTX 580!
  • 1 Hide
    gti88 , March 16, 2011 6:44 AM
    Nice article. Very informative.
  • -4 Hide
    Anonymous , March 16, 2011 8:34 AM
    Oh wow, lets reinvent a box that holds computer parts, accomplishing the exact same thing all other computer cases before it did, only this version will suck a little bit harder.
  • 0 Hide
    Crashman , March 16, 2011 9:09 AM
    m84092Oh wow, lets reinvent a box that holds computer parts, accomplishing the exact same thing all other computer cases before it did, only this version will suck a little bit harder.
    So, you're saying you'd have preferred an AT desktop case roundup?
  • 0 Hide
    Onus , March 16, 2011 9:16 AM
    I would like to have seen the PC-Q08 tested with the blower-style cooler. I cannot imagine how that could have been omitted.
    Otherwise, it was an interesting read.
  • 1 Hide
    Crashman , March 16, 2011 9:36 AM
    jtt283I would like to have seen the PC-Q08 tested with the blower-style cooler. I cannot imagine how that could have been omitted. Otherwise, it was an interesting read.
    The PC-Q08 didn't fail.
  • -1 Hide
    Anonymous , March 16, 2011 12:54 PM
    and the advantage of any of these over a "lunchbox" style mATX case is?
  • 1 Hide
    K2N hater , March 16, 2011 12:54 PM
    These rigs aren't only way better to carry around but also look awesome on the table. Wondering if the noise is bearable with a 6990 installed...
  • -1 Hide
    stingstang , March 16, 2011 1:04 PM
    It doesn't matter how small the case is for desktop portability. Put a handle on any ATX case and there ya go. What matters is all the cables, monitors, and speakers, keyboards, and mice you have to lug around with it. If there's a better solution for cable management then zip ties around, these cases would be more useless than they already are. Better looking, too.
  • 0 Hide
    nukemaster , March 16, 2011 1:12 PM
    With some tweaks you can get a Geminii S(you have to re-drill the mounting bracket on some, not others) with a low profile fan and 2 3.5 inch drives :) 

    Or 1 drive and a normal fan(take a bit of work.)

    http://img842.imageshack.us/img842/1414/dsc0348n.jpg
  • 0 Hide
    pletopia , March 16, 2011 1:20 PM
    whats the largest video card that will fit in the SG07? The website says 5970 will fit but i'm more interested to know which 6xxx radeon i'd be able to stuff in there. Have been planning on building a rig with that case since Sandy Bridge came out, only the chipset snafu has me waiting on the sidelines atm.
  • 0 Hide
    Crashman , March 16, 2011 1:41 PM
    pletopiawhats the largest video card that will fit in the SG07? The website says 5970 will fit but i'm more interested to know which 6xxx radeon i'd be able to stuff in there. Have been planning on building a rig with that case since Sandy Bridge came out, only the chipset snafu has me waiting on the sidelines atm.
    6970 and GTX 580 both fit, the dimensions are on Page 1!
  • 2 Hide
    Crashman , March 16, 2011 1:48 PM
    nukemasterWith some tweaks you can get a Geminii S(you have to re-drill the mounting bracket on some, not others) with a low profile fan and 2 3.5 inch drives Or 1 drive and a normal fan(take a bit of work.)http://img842.imageshack.us/img842/1414/dsc0348n.jpg
    That really depends on two other things that have nothing to do with height:
    1.) The motherboard used (as well as most other LGA 1155 boards) only has room for a 100mm cooler. For a 120mm cooler to fit, it has to be 10mm off-center, away from the graphics cards.
    2.) Additional offset (more than 10mm) is required for any heat pipes that protrude from the "short" side.

    Tom's Hardware should probably do a cooler roundup to figure out which low-profile designs actually fit this type of motherboard without blocking off the graphics card slot.
  • 0 Hide
    nukemaster , March 16, 2011 1:56 PM
    Quote:
    That really depends on two other things that have nothing to do with height:
    1.) The motherboard used (as well as most other LGA 1155 boards) only has room for a 100mm cooler. For a 120mm cooler to fit, it has to be 10mm off-center, away from the graphics cards.
    2.) Additional offset (more than 10mm) is required for any heat pipes that protrude from the "short" side.

    Tom's Hardware should probably do a cooler roundup to figure out which low-profile designs actually fit this type of motherboard without blocking off the graphics card slot.

    Its an H55 board(H55N USB3), so same spacing as yours(or damn close) :) 

    AXP 140 fits without mods(unless there are components on the back of the board that get in the way)
    Samuel 17 fits

    It is said that the Shuriken(not the big shuriken) fits as well.

    Or my first cooler for my MCE system. The stock Core2 cooler with bolts/nuts and rubber spacers.
    http://img190.imageshack.us/img190/3787/dsc0225zv.jpg

    I do think you should do a review for heatsinks that fit in SFF cases....
  • -1 Hide
    ta152h , March 16, 2011 1:56 PM
    The point about BTX is ill-informed. There were actually a LOT of BTX form factors sold; massive amounts. They were often sold by makes like Dell. So, it wasn't a failed standard at all, it just never caught on in the hobbyist market.
  • 0 Hide
    Onus , March 16, 2011 2:44 PM
    CrashmanThe PC-Q08 didn't fail.

    True, but seeing how much better it was might help people decide how much overclocking they can do.
    I have a MSI GTX460 "Cyclone" installed in mine. It exhausts none of its heat, which I think limits how well the CPU can be cooled.
    Another point to make is that the PSU can be mounted either way in the PC-Q08, either drawing its own air through the side vent, or helping to cool the CPU by pulling its air from inside the case.
  • 0 Hide
    dainsane1 , March 16, 2011 3:19 PM
    i do like the lian-li cases. good to see they stack up well. so surprised to see the tiny one win. i jammed a q8200 and a gtx460 into a lian-li PC-Q07B. it took some hacking of the case and just fit the video card. had to add 4x 40mm fans at the bottom and a blower at the top. the thing screams when the fans are at full speed. soon as i can get hold of a milling machine the whole case will become part of the water cooling system.
Display more comments