The Build Your Own Articles
- SBM 5: Price/Performance
- SBM 4: Overclocking The Competitors
- SBM 3: High-End System
- Do-It-Yourself Solar-Powered PC: Live Test
- SBM 2: Mid Cost System
- SBM 1: Low Cost System
- Do-It-Yourself Solar-Powered PC: Hardware
- The $500 Gaming Machine, 2007 Edition
- Do-It-Yourself Solar-Powered PC: Technical Foundations
- Is Your PC Ready for a System Update?
Working On The Turntable Platform, Continued
7:45 AM - September 25, 2007 by
Daniel Schuhmann
Source: Tom's Hardware US – Keywords: technical, foundations, diy, solar, powered, pc
Syndication:
Source: Tom's Hardware US – Keywords: technical, foundations, diy, solar, powered, pc
Syndication:
Table of Contents:
Working On The Turntable Platform, Continued

Reinforcing the lower panel with firring strips.

Upper panel mated to lower panel, rotating freely

The top platform rotates atop the fixed lower platform

The top platform is the same width as, but slightly shorter than the lower platform.

The top platform rotates freely in either direction

Preparing to mount the solar array on the turntable platform (top platform anchored to framework, axle and rollers need proper positioning)

Lining up the upper and lower platforms

Upper platform mated to lower platform with solar array attached

Maneuvering the upper platform and framework.

Completed turntable in place on the roof
- Previous page Photo Essay: Working On The Turntable...
- Next page Working On The Turntable Platform,...