Sign in with
Sign up | Sign in

Software and Accessories

X48 Motherboard Comparison, Part 2
By

Hardcore overclockers will always prefer BIOS settings or even jumpers, rather than use overclocking software. With limited enthusiasm for such programs in the X48-T2R’s target market, DFI simply included the third-party freeware clock generator tweaking utility ClockGen.

x48 motherboard comparison

DFI also includes a system monitoring utility for the ITE IT8718F sensor.

x48 motherboard comparison

Accessories
Documentation & Software Motherboard Manual
Warranty Card
Motherboard Driver CD
RAID driver floppy (Intel + Jmicron)
Heatsink Instructions
Hardware 1x 80-conductor Ultra ATA cable, Round
1x Floppy Cable, Round
4x SATA Data Cable
2x 2-device 4-pin to SATA power adapter
1x Bernstein Audio Module
1x Audio Module Cable
1x Jumper Pack
1x RAID Driver Floppy
1x Heatsink Compound Pack
1x I/O Panel Shield

DFI packs its Northbridge sink and audio module separately from the motherboard, but the rest of the installation kit looks rather basic. Users who prefer hardware overclocking will appreciate how DFI adds an extra package of jumpers with easy-grab tabs.

x48 motherboard comparison

Ask a Category Expert

Create a new thread in the Reviews comments forum about this subject

Example: Notebook, Android, SSD hard drive

Display all 9 comments.
This thread is closed for comments
  • 5 Hide
    nihility , May 31, 2008 8:23 AM
    I thought the major concern with overclocking was doing it with 4 GB or 8 GB of memory installed and with quad cores.
    Buying an overly expensive high end motherboard but installing a 65 nm dual core processor and just 2 GB of RAM seems a very odd combination to me.
  • 0 Hide
    Anonymous , May 31, 2008 4:10 PM
    @ni

    Not so odd if you want to get the base foundation set up and then wait for lower prices on higher performance parts later on down the road.
    A quad core (3.0 GHz x 4) chip is coming down the pike by years end and DDR3 prices are on the slide. Building an E8400 / 2 GB base machine is exactly what I did to finally migrate from my 5 year old P4 Extreme Edition / Intel 875 based rig.

    That's the beauty of the X48 platform; longevity.
  • 0 Hide
    Anonymous , May 31, 2008 10:45 PM
    The ECS offering has supposedly been out for around a month, but I can't find it for sale ANYWHERE!! can't even find a price. I used to turn my nose up at ECS products. Our company used Asus boards exclusively thinking they were a higher quality product. Evey one of our Asus boards failed within 4 years. This may be because the Chinese have studied the American business model... Make a product that is designed to either fail or need parts within a calculated period of time. ECS are much cheaper, and so far seem more stable than the Maximus Formula board we purchased recently. The Asus BIOS is for people who like to toy with settings. Unfortunately their BIOS has become complicated beyond their programmers ability too write stable code.
  • 1 Hide
    Anonymous , June 1, 2008 4:09 AM
    Glad to see that gigabyte's board was so much more energy efficient than Asus', or any other board for that matter... especially while overclocking
  • 0 Hide
    Fedor , June 1, 2008 7:53 AM
    Arcolyte - lol. Did you fall asleep and dream up another page of the review which had power consumption whilst overclocking? :p 

    For the record I'm using my first Gigabyte board (X38-DQ6) and overall I'm pretty happy with it, but having said that I haven't used Asus in at least 5 years. With these comparisons it often comes down to features since performance is pretty near (although the low memory speeds achieved by the Gigabyte surprised me!).
  • 0 Hide
    Anonymous , June 1, 2008 3:19 PM
    " Intel covers all of its CPU VRM MOSFET?s with sinks. Our apologies for the alphabet soup that made up the last comment. " -> You could've gone with " Central Processing Unit Voltage Regulator Module Metal?Oxide?Semiconductor Field-Effect Transistor's " , so it's ok =)
  • 0 Hide
    frodbonzi , June 2, 2008 3:01 AM
    I wonder how the Asus' Rampage Formula stacks up here? It supports DDR2 or DDR3 and is part of the RoG line... X48 as well...
  • 0 Hide
    xanxaz , June 2, 2008 8:00 PM
    asrock rocks....lol...although i'll keep my gigabyte... as i dont know where to say this, it's better say it here... your main page is eating my cpu cycles... between 25% up to 50% cpu utilization while viewing your site? please cut down in animated ads... running a c2d at 3.6 and still lags while surfing... dah... it's just your site... os is it me? i think it's the ad on the top right corner that is causing that...
  • 0 Hide
    wozeus , June 16, 2008 5:54 PM
    I see that Newegg has ECS X48T-A for under $200. Looks like it's a great deal...going to get one.