here.... I'd flash my BIOS to the latest version to see if that resolves the 6.5 issue and maybe the 1066 issue. Failing that I'd RMA the RAM. You should be able to put the RAM in, select EPP, and be away laughing on stock settings (e.g. no overclocked CPU)....

800/1066 issues to clarify some more; then hopefully I can't make some progress. Anyone with any suggestions, please let me know about them. It could be that all the reports I've read of the E5200 and GA-G31M-E2L overclocking successes utilize DDR2 1066 RAM...

it by .015 in bios, then set multiplier to make the ram 1066, worked fine for me, hope that helps dude, dont have personal experience with your make of ram, but would guess that it is a similar issue to what i had All 1066 ram will be shown as 800, 1066...

Memory and my CPU If you think its the 512 MB memory I can get a another 2 GB with exact specifications. Temperatures are absolutely are not a issue here. 1066 on MAX LOAD goes to 54 * C. Very Stable at 1066 but wont even attemplt 1666. BTW my PSU is Mercury...

memtest runs without issues for hours and hours. The only way I got 100% stability was when I set the memories @1066 and ddr voltage at 1.8 with 7-7-7-24 2t timings. Then prime95 runs fine. I ran it for 8 hours without any issue @1066. Didn't bother to...

the PSU and CPU absolutely bake in there it's so hot - just touching the outside case feels very uncomfortable - and have performed flawlessly for over 1 year now without any issue. I can't overclock because my temps are so high.. but you get the point. I...

ASRock G41M-LE - Setting Ram to 1066 - Quick Question.... <--ASRock G41M-LE mobo <--G.SKILL 4GB DDR2 1066 (PC2 8500) <-- Guide Page 20 for Jumper settings Here is my issue. All I want to do is run my memory at 1066. Right now it's at ddr 800. I...

running COD4 and installing from a CD). I can reproduce this issue with OCZ 1066 mem or Kingston Hyper X 1066 ram. I have : 650 PS Q9550 EVGA 9600 GT OC 1 Seagate and 1 WD 500 gig drive (sata II) 1 Sata DVD/CD Burner (Samsung) 8 gig DDR2 Kingston 1066...

X38-DQ6 boot cycle. I am having a similar issue to Sphinx Drones with my brand-new X38-DQ6, Q6600 and DDR2 memory however mine does not POST at all and no video is initialized either! The total hardware is: Q6600 CPU Gigabyte X38-DQ6 motherboard G.Skill PC2-8000...

that there is a very good chance you will run in to issues with RAM higher than DDR2 800, such as DDR2 1066. I recommend you get quality DDR2 800 RAM and run them at 1:1 ratio or overclock the RAM. This issue dose not apply to DDR2 800 RAM that has been overclocked....