ATI 4780 HDMI 60hz problem. Hi all, Replaced my ageing 8600GT for this card but although i love the power i am having problems with HDMI and 60hz in some normal monitor style resolutions. When i had the 8600gt i could choose any resolution and have 60hz,...

Connecting the 4780 *2. Hey i cant seem to firgure out and it's anoyying me pridy bad right now so i fort id see from the pro's. -Which socket do i plug the power into ? -There's a 4 pin an and 8 pin and no instructions on which one to plug it in to(...

4780 and a geforce 9800 gx2 for PhysX. I replaced my 9800 gx2 with a 4870 crossfire setup and was wondering if I would be able to use one 4870 and then the 9800gx2 for PhysX? Does the GX2 even support PHysx? Its more curiousity than anything.. I replaced my...

could still upgrade with another one :) hmm, but 4780 in crossfire will outperform a single 4780 x2 right? I'm still a bit confused and newbie as well x) Can I run a 4780 + 4780 x2 in crossfire? :heink: I would go the X2 route unless you have a motherboard...

Sapphire 4780 asus m3n78 pro. I am trying to install a spphire 4670 1gb on a asus m3n78 pro. will this work. . I am trying to install a spphire 4670 1gb on a asus m3n78 pro. will this work. It depends on what power supply you have, but most likely, yes it...

Gtx 285 vrs 4780 1 gig. Can anyone provide a link to a side comparison of the gtx 285 and the 4870 1gig cards? Money not being an issue what one of the 2 would you get and why?. Can anyone provide a link to a side comparison of the gtx 285 and the 4870...

Best color calibration hardware/software for $'s..?. Archived from groups: comp.periphs.printers () I have an Epson 4780 Photo scanner, a Canon i9900 printer and a Sony 21" GDM-F520 CRT monitor. I'm looking for suggestions for a color calibration system....

there will be no difference in performance (fps), but go 1900x1080 or larger and the extra memory will help. At 1650x1050 4AA, the total fps from Tom's: 4780 2GB = 413 4780 1GB = 416 4780 512MB = 407 There's hardly any difference (9fps total spread,...

x-over impedence question. Archived from groups: rec.audio.tech () Apologies if there is an FAQ site that covers this.... My question is in regards to xover calculations and the fact they are based on the nominal impedence of the driver. Where available,...