FS: 4DTV Remote Control. Archived from groups: alt.video.satellite.4dtv () My 4DTV receiver died and I am out of the 4DTV baseline. The remote control is good condition. $25 plus $5 shipping. If interested email me at: <jwilson9@erols.com> for specific...

Motorola 920 4dtv Remotes. Archived from groups: alt.video.satellite.4dtv () I have two 920's, is it possible to change the remotes so that one does not control both receivers. Thanks. Archived from groups: alt.video.satellite.4dtv () I have two 920's,...

of second receiver into ant input of first one and using remote to change signal source I do this with three of mine, satcruiser controls coship3188C and 4DTV controls it and satcruiser "Nicolai Admiraal" wrote in message news:ccpl99$g9i$1@reader10.wxs.nl......

get a great picture but no sound. Thanks for any info. From : "The 3-in-1 remote is programmed at the factory to control the volume of your TV. To reprogram the remote control to operate the source volume of the IRD press and hold the 4DTV button...

Great story. I thought we had lost you... >> Archived from groups: alt.video.satellite.4dtv () All 4DTV remotes are interchangeable. They will work with any model 4DTV. Most 905 remotes do not have UHF capability (but a few do). "wolf2" wrote in...

she was doing. I think i got a remote that looks like the new 4dtv one and might have just as many buttons....But...This isnt marked 4dtv like the ones we have seen on the net and these buttons dont take me to whereever options are hiding.. Archived...

the rf coax into the sidecar's rf output,then hook the rf output of the analog rcvr into the sidecar's vhf input and maybe they would use "sat\TV" on the 4dtv remote if they wanted to choose to watch the analog receiver? --- Outgoing mail is certified...

to 4DTV channels. >>>>Greg O. >>>>>> There was a project called blackboxDVR that did exactly that. > It received the DirecTV channel command, mapped the DirecTV channel > number with the 4DTV 4DTV sat/VC, gave the IR command to move to that > satellite,...

have a sat. used for 4DTV use. The 4DTV will control the position and polarity, when you add a DVB receiver you will need to use it to define FTA channels. It does not matter if you are using a C or Ku satellite on the 4DTV since it controls only position...

slave it to your 922 with a d.c. blocking splitter on your lnb coax (or coaxes ). let the 922 move the dish and control polarity. "Matt Scoff" wrote in message news:69kom0pkf5kho9d6oqahbqda7e3t31rvco@4ax.com... > I have a 922 4dtv receiver and a...