Can't access Internet after installing router. I installed a US Robotics 8054 router, but now I can't access the Net. I'm getting a good strong cable signal (not DSL)but no ISP recognition. I used the US Robotics configuration utility (USR apparently prefers...

are using Mootrolla, I would recomend getting a broand band router from Belkin or Linskys to use with it. I have Comcast also and since I installed a router I have not had near as much trouble with security issues. As far as installing your printer you...

it had trouble detecting that my Belkin 54g Router had a wireless connection. Miraculously it can now establish a connection with the router but it seems that the connection is worthless. I can't access the internet or access any files on the other PC even...

able to access the internet successfully, I assumed that all installation steps for the router were complete. Finally it dawned on me that maybe there was a router setting for wireless devices, so I went back through the router installation steps, and sure...

router. But the features are there, since the latest firmware at least. I wonder if they are on any of the other routers, just unadvertized. I own the Linksys WRT54GS V3.0 and too very surprised about the throughput. Right now the router is sitting on a...

network or the internet (and across the internet would be a bad idea) then > you can uncheck the "File and printer" sharing box in your network > settings - this makes it just a little harder for people to access your > computer. >>>> -- > spam999free...

the rooms due to the high expense. Therefore, dial-up internet access is not a possibility. However, the company does have an office about 18 km away (11 miles) at which they have high speed internet service. There are technical problems as I see it,...

the rooms due to the high expense. Therefore, dial-up internet access is not a possibility. However, the company does have an office about 18 km away (11 miles) at which they have high speed internet service. There are technical problems as I see it,...

modem/router with 4 ports, and connecting a computer I am able to get an IP and access the internet... however, if I put a wireless router (with auto MDI/MDI-X) in between, my computer is able to get an IP from the wireless router, but can't access the internet....