The problem is that if I use the modem as the DHCP, any wireless device that tries to connect to the Access point can't because it can't get an IP address through the Access Point from the Modem. If I turn on DHCP on the Access Point, I can get an IP...

BT300 Access Point Problem. Archived from groups: alt.cellular.bluetooth () Hi, Wondering if is is just me with this problem. I am using a Bluetake BT300 as an access point in my home to connect to my ISDN router for internet access, there is a TDK...

Access Point Problem?. K, I have a networking problem on my hands... heres my configuration Cable Modem | Router ---------------- | | PCs (wired LAN), and a Wireless D-Link 802.11a AP | My computer (D-Link 802.11a Wireless PCI Card) and my dads laptop...

wireless network. I need to disable wireless and re-enable it to lock on to a wireless signal again. I have this problem with numerous wireless access points and don't have any problems with my laptop. Has anyone seen this problem with their Axim? Any...

with > a Symbol access point). The LA-4121 associates and works fine without > encryption and with both access points. >> The long pre-amble parameter was correctly configured for the CISCO >access point so that was not the problem. ...

is fairly superficial (different channel, move access point, waggle aerials etc) and has been ineffective IME.. Archived from groups: alt.internet.wireless () Can anyone point me to information on how to diagnose and overcome interference problems in...

address to the access point or whether it's some hardware problem with the ethernet connection. By the way, the switch shows the link light as on, when the access point is connected, so the connection is there, just no communication. Oh, and when I send...

wireless access point problems, mac - adsl usb modem. Archived from groups: alt.internet.wireless () Hi guys, I'm trying to connect a wireless access point via ethernet to a mac. The mac is connected to the net through a dsl modem and works fine. I just...

Binatone access point problems. Archived from groups: alt.internet.wireless () I've got a Binatone Broadband wi-fi access point (WL-1100) i think. There's three lights on it: Link, TX and Power. Every now and then the TX button goes off and all connection...

it only takes a minute. I previously posted a troubleshooting guide: which might be of some use. However, methinks using another radio on a different computah will first be necessary to assign the blame to either the access point or the client radio...