120 search results for adaptec 2940uw scsi card
OK
Filters
Ad
  • The 75/83 MHz Bus Speed Project - Reviews

    Millennium both agree with the 83 MHz bus speed because I have never had a problem. I have heard bad things about the Adaptec 2940UW card though, like the older revisions don't even work with 75 MHz, and you would be VERY lucky to get one running on 83 MHz...

  • Morrowind memory leaks (progressive slowdown) -- any solut.. - Forum

    LE, clocked at 420 / 420 MHz, Forceware 61.76... tried a few other driver versions with little difference - Adaptec 2940UW SCSI controller, Toshiba SCSI DVD-ROM - using onboard motherboard sound & Ethernet - Windows 98SE, FAT32 filesystem - would...

  • Preview of 3Dfx Voodoo Banshee, S3 Savage3D and NVIDIA RIVA TNT - Reviews

    obvious that Banshee will be a great success. It runs the majority of the current (single-pass) Direct3D games faster than a single Voodoo2 card, it runs all the Glide games (e.g. Unreal) as well and multi-texturing games slower, but not that much slower than...

  • Boot problems with Maxtor ATA/133 and Adaptec 2940UW - Forum

    Boot problems with Maxtor ATA/133 and Adaptec 2940UW. Archived from groups: microsoft.public.windowsxp.hardware () After adding a Maxtor ATA/133 controller card to my XP system I'm not able to boot from it unless I remove the Adaptec 2940 SCSI card. This...

  • Adaptec 2940UW - Forum

    Adaptec 2940UW. Hi: I found that Win98 cannot be shut down with the card installed even with the latest bios (m/b and scsi card) and drivers installed. But Win2k is ok. I'm using P3B-F and Win98. It seems the problem is with the scsi card, I thought...

  • Morrowind memory leaks (progressive slowdown) -- any solut.. - Forum

    1 GB PC3200 - Maxtor 7200rpm EIDE drive, 45 GB - GeForce FX 5700 LE, clocked at 420 / 420 MHz, Forceware 61.76... tried a few other driver versions with little difference - Adaptec 2940UW SCSI controller, Toshiba SCSI DVD-ROM - using onboard...

  • DAT 4mm Tape Drive Not Usable In NTBackup - Forum

    DAT 4mm Tape Drive Not Usable In NTBackup. Archived from groups: microsoft.public.windowsxp.hardware () Hi, Recently I just connected a 4mm DDS2 DAT tape drive via a SCSI card (Adaptec 2940uw) to my machine running XP Home (recently patched). On booting...

  • USB card reader and SCSI on same machine - Forum

    used by USB card readers. I've successfully used the USB card readers with the following SCSI cards: Adaptec 2940U Adaptec 2940UW Tekram 390F ...

  • HELP: Acer Prisa 620st - Forum

    is a PCI SCSI card that has 25 pin connector and I was wondering if anyone can help me with a sloution. I am also having an Adaptec 2940UW in my setup and if there is a way to use this card with the scanner but how do I do it since the external connector...

  • FS printers/parts trays, printheads -- oki fujitsu dl3700 .. - Forum

    units with 1 100mbit ethernet 2 units with 2 100mbit ethernet (pa-fe-tx) cisco pa-fe-tx $199 cisco rsp2 route switch processor II 16 meg ram 16 meg flash 8 meg falsh card cisco mem-rsp-64m 64 meg cisco mem-rsp-flc20m 20 meg flash card for cisco rsp...

Ad