b) was extra, so I thought maybe I could set it as an access point and extend the range to some far points of my house. I set the b router (in the router setup) to be used as an access point, gave it an assigned IP address, and plugged it into a network...

Linux side. This will let you talk to an access point or wireless router. None of the wireless routers have a client mode. However, many of the access points do have a client mode. See WAP54G, DWL900AP+, etc. 3. Access point running as an access point....

that in thruput. This could be slower than your DSL. You need an ethernet router. The access point will work with any *ONE* of your two wireless cards at one time as the access point has no way to share a single IP address. You install the router between...

of the routers into an access point by: 1. Ignoring the WAN port 2. disabling the DHCP server. 3. Assigning an IP address to the LAN side of the access point that is NOT the same as the other router. For example, if the "g" router...

4 pcs networked together with fixed IPs and a wireless access point that my apple express connects to for music and my daughters laptop, this has a key to access. I have been told that I can fit another access point with a different range of IP addresses...

winter solstice celebration Mark Lloyd Archived from groups: alt.video.ptv.replaytv () it seems to be working somewhat better for some reason ?, not sure why though,I reset the modem,router,access point and switch and all seems to be OK for the time...

winter solstice celebration Mark Lloyd Archived from groups: alt.video.ptv.replaytv () it seems to be working somewhat better for some reason ?, not sure why though,I reset the modem,router,access point and switch and all seems to be OK for the time...

and went thru the configuration. Connection to the access point is shown as 1 Mbps. Occassional connection to internet but quickly dropped. I started looking at different settings for the router and the access point and cannot figure out how to get...

access point and wont show any IP as it isnt connected to either the access point or the router. They are all also using Netgear software for config. We have put the MAC address of the router in the access point settings. Is this all that we need to...

an access point and moved it a little closer to where you are? Might hlep a little. im not quite sure on how to do that. can you explain in depth? On my router, you know how you log into your router and it has all the configuration options? On mine anyway,...