off run, you will have a max tire speed; max nose wheel on the runway speed, a rotation speed for the gross weight, and a gear up/flaps up max parameter speed that will be occurring extremely close to your rotation speed!!!!! Take off in a high performance...

processor speeds on a 1Ghz machine. Hi all, does anyone know where I can get one of those programs that let me play old games that require slower processor speeds on a 1Ghz machine Dang, I had an original version of Tetris, it was easy to play on my 16MHz laptop....

else have this card able to adjust fan speeds? My friend has a BFG card with a 2-wire fan connector and he tells me he can adjust speeds fine with rivaTuner, but just not able to get the RPM readings... You can not adjust fan speeds on a card with a 2-pin fan...

the bus, you need to notch down the RAM speed a little for each increment. Let's assume the RAM won't run over 1800 - just adjust its speed to that level once you ramp up the bus clock. And once you find a 'actual' RAM speed that works, need to test it...

Antec TPII-480 blue I didn't have any problems adjusting the fan speed just make sure your in the right area to adjust the speed and not where you monitor the speed. For some reason for me it doesn't do anything under the driver level control area where...

program is a bit complex for someone outside of IT to work with but tinkering with it you can find trends and know what's going on. As far as adjusting speeds, that would be talking about adjusting the MTU. Standard is 1500 but on the top of the frame packet,...

have a fan controller for it, but if I could have a program adjust the speed relative to temperature, I'd be more than happy.. Is it possible to use RivaTuner or some similar program to adjust the fan speeds of the CPU relative to the CPU temperature? I have...

setup fan speeds based on gpu temps. I have the scheduler set up to start at 60%. When my temp hits 55C it goes up to 70%, 60C to 80% and on up to 100%. I have "reference fan duty cycle%" setup so I can see if my fan is adjusting properly. The problem is,...

they are adjustable, however I don't really think that will be necessary. I'm going to be buying three to add to the case (2 in front and one on the side). I'm going for a quiet system, so I don't really plan on adjusting the speeds much. How accurately...