mobo for this processor? thanks... im planning to buy this processor intel core 2 quad Q8200 because it's cheaper than any other quad...i just want to know if this processor is good or not..guys i need some advice so i can buy it soon..any good advice mobo...

is, the more heat it will induce. Your mobo is fried. i know, that was stupid :/ but the cpu should be fine? Today i was looking around for a new mobo and found this, GIGABYTE GA-MA780G-UD3H can you give me some advice on this mobo?? thanks :) You wouldn't...

nothing. I am now in the RMA process with newegg to get the cpu/mobo replaced. Is there anything I could have done wrong that would lead to this? I want to be sure everything is okay when I get the mobo/cpu replacement next week. I am hoping that both mushkin...

cpu heatsink, you'll prolly find you need a flat screwdriver to push down on the HS clip. Might wanna put something between your screwdriver and mobo in case the screwdriver slips. Don't wanna damage the mobo. Follow the advice above and find a mobo replacement...

Seeking Thoughts/Advice on mobo, GPU, memory for 1st time i5 build. This is my 1st time build and I've really gotten into it. I've heard a lot of positive things about this community and I've been a lurker for a few weeks. I appreciate your input in advance!...

about that. Also, any advices on what mobo+cpu+memory combinations to get? P4 with Rambus? or Athlon XP (or MP? what's the difference? sorry it's hard to keep up) + DDR266? Help! I would appreciate any advices. Thanks.. Hi, I need advice on upgrading...

It looks like then that I have to increase my budget further :(. Not only a MoBo and case, but also heat sink and fan. Cool. Would you have any advice as to what heatsink and fan I could go for? I am planning to get this Mobo -- Thanks. wrote...

That's when I started checking the forums and thought that replacing the mobo would work. In any case, I've since inspected the original mobo and there aren't any outward physical signs of anything being burnt out. The capacitors aren't bulging and there...

Tom >> I have been looking for a replacement CR2032 battery holder. I know I have seen a battery holder with external wires leading from it. That way I can solder the wires to the mobo and replace the battery as needed. I hope I gave enough description....