How Are Your Old Amps Holding Up?. Archived from groups: rec.audio.high-end () I own a Hafler 9500 power amp which is probably 11-12 years old and recently, I seem to feel that the system has lost something...soundstaging in particular. Is it probable that...

and falcon xovers and have very little left for an amp. I'll >>probably get a Quad II at some point in the future, but can someone >>recommend a decent > $100 amp to hold me over until then? Thanks a ton! >> I don't know of any decent > $100 amp of any...

just get enough to spec out what you need. 1100 Watts is overkill. You can be safe with 700 Watt, as long as your +12 Volts carry the necessary Amperage. For example, 4 +12 Rails at 20 Amps can hold dual GTX 200's, or 2 +12 Rails at 40 amps. ...

Advice for calling US Mobile Phone?. Archived from groups: uk.telecom.mobile,alt.cellular-phone-tech,alt.cellular,comp.dcom.voice-over-ip () Hi, I live in the UK and my girlfriend is going to america as part of an exchange programme for the summer. Does...

Bragging rights, was "power amps" etc.. Archived from groups: rec.audio.high-end () Now that the money question is being resolved, it is time to look at what the claimant should put on the table. I propose that the person holding the money also hold a message...

you also checked your temps? And finally, what all is in your rig? I uninstalled the old drivers, see first sentence. The PSU has 36 amps on the 12v rail. Temps are holding 33c for idle, 45c under load. Rig: FX-60, 2 gigs ram, HD 3870, 250 gig HD....

the Yamaha amp in question of course) I would also have thought some valve amps (low power SETs?) might sound recognizably different to the Yamaha on repeated trials particularly with low-impedance speakers. Or use early Naim amps with something like...

I did not kill my power amp. Archived from groups: rec.audio.pro () Just an update for the archives, the Adcom 535 II that I posted about is now performing beautifully. All four of the 4 amp 250V fuses on the main circuit board were blown, while the 5...

slot. As of now the card is running but Im worried that it is not running at full potential due to the connection or the watts and amps of the PSU. *Also I would like to know if my CPU is holding the 260 gtx back, and if it is, any suggestions on a AMD...

Decided on a 8800GT & X2 5600+,runs great..But the cpu cores seem hot. Hi guys Well it seems I've grown tired of some of my games bogging down with low fp2, so I'm thinking of a new card. After seen the 8800gts on Newegg for about $140 (with a $30...